...
The allows the configurator to add 1 or more qualifier to the definition of the rating curve. This is useful when for 1 location more rating curves are valid.
The locationId and the configured qualifiers define the id of the rating curve.
startDate
This element defines when the rating curve becomes active.
...
The date on which the rating curve was created.
creationTime
The time on which the rating curve was created.
...
When an offset is defined the stage can be calculated by:
In case the logaritmic option is selected the interpolation will be performed on a table with the logaritmic values of the stages and the discharges.
minStage
The minimum stage which is allowed for this rating curve. If the minStage is configured as 0.2m and a stage of 0.1m is used as input to calculate a discharge.
...
actual calculated stage will be set be corrected to 0.2m to ensure that no stages lower than minStage are calculated.
...
actual calculated stage will be 5corrected to 5.2m to ensure that no stages higher than maxStage are calculated.
...