Page tree
Skip to end of metadata
Go to start of metadata



Delft-FEWS uses event codes for messages that are logged to the database. These event codes can be viewed via the admin interface and via the system monitor in the Operator Client, and since 2014.01 errors can also optionally be automatically sent to the system event log. For forwarding errors to the Windows Event Log some configuration changes are needed and a list of event sources needs to be pregenerated under a system administrator account. See the page Delft-FEWS Installation - Configure MasterController application - 2017.02 and later that lists these event sources (may be encrypted).

Changes in 2018.02

Since 2018.02 many event codes include an <mcId> or <fssId>. The length of an event code is limited to 64 characters. If appending the relevant <mcId>'s or <fssId>'s would cause the event code to exceed this limit, the event code will be truncated to the first 64 characters.

Important changes in 2017.02

 

The event code format has changed, in that the semi-colon is being replaced by the period sign, e.g. TASKRUN:Failed.<workflowId> is now TASKRUN.Failed.<workflowId>.

The 2017.02 contains a brand new backend which has replaced the previous backend. Therefore it is possible that an event code important to your system is no longer present. The following list of event codes is a brief list of event-codes that is supported thoughout releases and have been tested in 2017.02. If you have questions about 2017.02 event codes contact Delft-FEWS support or Delft-FEWS Product Management. If you have a specific use case it is important to communicate that with us in an early stage. In principle we can only add event codes in a new mc build release.

Persistent event codes (2017.02 #77590 onwards)

The following list of event codes are often used for event actions, and are supported thoughout releases unless stated otherwise in release notes

2017.022018.02 and onwards
Client ERRORClient ERROR
Config.ErrorConfig.Error
Client WARNClient WARN
Config.WarnConfig.Warn
Client INFOClient INFO
Config.InfoConfig.Info
DataStore.NewCurrentRunDataStore.NewCurrentRun
Master-Controller ERRORMaster-Controller ERROR
SYSLOG.RemoteMCLostSYSLOG.RemoteMCLost.<mcId>
SYSLOG.RemoteMCFailed.<mcId>
SYSLOG.MC.<mcId>
SYSLOG.FSSLost.<mcId>.<fssId>
Master-Controller WARNMaster-Controller WARN
SYSLOG.McSynchSuspendedSYSLOG.McSynchSuspended.<srcMcId>.<dstMcId>
TASKRUN.Failed.<workflowId>TASKRUN.Failed.<workflowId>
Master-Controller INFOMaster-Controller INFO
SYSLOG.RemoteMCFoundSYSLOG.RemoteMCFound.<mcId>
SYSLOG.RemoteMCOk.<mcId>
SYSLOG.McSynchResumedSYSLOG.McSynchResumed.<srcMcId>.<dstMcId>
SYSLOG.FSSFound.<mcId>.<fssId>
TASKRUN.Complete.<workflowId>TASKRUN.Complete.<workflowId>
TASKRUN.Terminated.<workflowId>TASKRUN.Terminated.<workflowId>


 Event codes in 2017.02

Event codes in 2017.02

ERROR
<Custom.EventCode>3 description
Amalgamate.Error100 Amalgamate of <amalgamatedActivities> increased the number of rows or disk space: amalgamateBlobsRead rows ( <amalgamateReadDiskSpace> ) amalgamated to rowsText
ArchiveImport.Error115 Error importing archive file: file : <message><errorMessage>
ArchiveImport.Error115 not supported ArchiveDataType (<customId>) present in the manifest file for CustomArchive
ArchiveRun.Failed130 archive import directory does not exist importDirectory
ChartLayer.Error160 error while running chart layer <message><errorMessage>
Config.Error1 ( or ) are not configured correctly in outputFileNameExpression tag.
Config.Error1 <color> is not a valid color <message><errorMessage>
Config.Error1 <color> is not a valid color, using default map background color
Config.Error1 <currentImportType> not supports element gotoLineWhichStartWith
Config.Error1 <currentImportType> not supports element skipFirstLinesCount
Config.Error1 <errorMessage>
Config.Error1 <eventCode> is listed twice in notification event codes explorerConfigFile
Config.Error1 <message>
Config.Error1 <message> <locationSetId><errorMessage>
Config.Error1 <message> Explorer.xml
Config.Error1 <message> configFile
Config.Error1 <message> configFile at line <lineNumber><errorMessage>
Config.Error1 <message> configFile<errorMessage>
Config.Error1 <message> displayConfigFile<errorMessage>
Config.Error1 <message> explorerConfigFile
Config.Error1 <message> for location set <locationSetId> csvFile locationSetsConfigFile<errorMessage>
Config.Error1 <message> for location set <locationSetId> dbaseFile locationSetsConfigFile<errorMessage>
Config.Error1 <message> for modifier id<errorMessage>
Config.Error1 <message> forecastLengthPanel
Config.Error1 <message> in time series for modifier id configFile<errorMessage>
Config.Error1 <message> locationSetFile
Config.Error1 <message> locationSetsConfigFile
Config.Error1 <message> run dialog
Config.Error1 <message> xmlFile
Config.Error1 <message><errorMessage>
Config.Error1 <variableTransformationName>. A DuoSpecificationVariable, UserDefinedFunctionVariable or TypicalProfileVariable must be specified.
Config.Error1 @#$ are not allowed in location id id configFile
Config.Error1 @#$ are not allowed in qualifier id id configFile
Config.Error1 @#$~ are not allowed in parameter id id configFile
Config.Error1 @#$~ are not allowed in parameter id id dBaseFileReader parametersConfigFile
Config.Error1 A minimum of 500MB should be configured in the clientConfig.xml to let work 'seamless archive integration' properly
Config.Error1 A module instance that is referenced as simulated historical by another module instance is not allowed to reference a simulated historical module instance by it self: module instance <moduleInstanceDescriptorId> in group <groupId> <configFile>
Config.Error1 AR coefficients must be successive list starting with Order 1!
Config.Error1 Absolute path is required, use e.g. $REGION_HOME$ to make is absolute. file configFile
Config.Error1 Absolute path is required, use e.g. $REGION_HOME$ to make it absolute. res configFile
Config.Error1 AddLocationCommand type command expected. Found: <command>
Config.Error1 All child locations should have a different sigma <locationId> for parent <parentLocationId>
Config.Error1 All parameters belonging to the same group should share the group name <groupName> groupName id parametersConfigFile dBaseFileReader
Config.Error1 All parameters belonging to the same group should share the same display unit <displayUnit> displayUnit id parametersConfigFile dBaseFileReader
Config.Error1 All parameters belonging to the same group should share the same parameter type <parameterType> parameterType id parametersConfigFile dBaseFileReader
Config.Error1 All parameters belonging to the same group should share the same unit <groupUnit> unit id parametersConfigFile dBaseFileReader
Config.Error1 All parameters belonging to the same group should share the same uses datum option <hasGroupDatum> parameterType id parametersConfigFile dBaseFileReader
Config.Error1 All parameters belonging to the same group should share the value enumeration <timeSeriesValueEnumeration> valueEnumeration id parametersConfigFile dBaseFileReader
Config.Error1 All referenced historical module instances in group group should belong to the same group moduleInstanceDescriptor '>' historical <configFile>
Config.Error1 All time series sets for grid map layers should have a relative view period or read complete forecast res configFile
Config.Error1 All time series sets for grid map layers should have a single explicit ensemble member res configFile
Config.Error1 All time series should share the same time step when aggregation time spans configured, <configFile>
Config.Error1 An ensemble loop can only write ensemble time series. Time series sets with configured <ensembleId>main</ensembleId> are read-only within an ensemble loop. Time series group <runningModuleConfigFile>
Config.Error1 An ensemble loop can only write time series for the loop ensemble member. Time series set with configured ensemble members are read-only within an ensemble loop. Time series group <runningModuleConfigFile>
Config.Error1 Archive task type not supported for this module: archiveTaskType
Config.Error1 Attribute attributeDef has multiple values for identifiable configFile
Config.Error1 Branch id should equal an existing location id <branchId> configFile
Config.Error1 Can not configure both AR coefficients and AnalysisWindow!
Config.Error1 Can not create AnalysisWindow for error model calculations!<errorMessage>
Config.Error1 Can not create create class breaks id <message> configFile<errorMessage>
Config.Error1 Can not delete directory for module data set update <moduleDataSetDirPath> because it is not called bin or a sub directory of the region home dir <regionHome> Module data set will not be updated
Config.Error1 Can not detect root element ratingCurveFile<errorMessage>
Config.Error1 Can not find <shapeFile> configFile
Config.Error1 Can not find active/current explorer.xml in system config
Config.Error1 Can not find column ' columnName ' in <expression> dBaseFileReader Available columns <columnNames> configFile
Config.Error1 Can not find csvFile
Config.Error1 Can not find dbf for resource configFile
Config.Error1 Can not find dbfFile locationSetFile
Config.Error1 Can not find flag conversion descriptor id
Config.Error1 Can not find gis connection <connectionId> configFile
Config.Error1 Can not find help file specified in explorer config file
Config.Error1 Can not find id map id
Config.Error1 Can not find location column/attribute idAttributeName in dbf file dbfFile configFile
Config.Error1 Can not find parameter <id> defined in extern units, <configFile>
Config.Error1 Can not find parameter <id> defined in external units
Config.Error1 Can not find parameter <id> defined in interpolate series
Config.Error1 Can not find pathWithoutExt.prj, <configFile>
Config.Error1 Can not find shpFile locationSetFile
Config.Error1 Can not find time series button panel panelId referenced in topology node <segmentNodeId>
Config.Error1 Can not find unit conversions id
Config.Error1 Can not find wms connection <connectionId>, define connections before the layers in the map xml, <configFile>
Config.Error1 Can not import external forecast modifier for modifier type <modifierType>, modifier type does not allow a valid time file
Config.Error1 Can not parse <text> for attribute attributeId for <expression> configFile
Config.Error1 Can not parse date time <text> for <expression> in dbf file for location with id ' locationId ' for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1 Can not parse date time <text> using pattern <dateFormatPattern> for <expression> for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1 Can not parse expression as value for <expression> configFile dBaseFileReader
Config.Error1 Can not parse function expression in <expression> configFile
Config.Error1 Can not purge directory <dir> because it is not a sub directory of the GA root dir <dir>
Config.Error1 Can not read external locations table locationsTable<errorMessage>
Config.Error1 Can't find icon file name referencingConfigFile
Config.Error1 Cannot use irregular timeNavigatorTimeStep for time navigator in ScadaDisplay Config.
Config.Error1 Chainage attribute <chainageAttributeDefId> for location set locationSetId has multiple values which is not allowed. Make sure the attribute file only contains each location once. , <configFile>
Config.Error1 Chm Help file specified in explorer config is no longer supported since 2016.01. Use pdf help file instead helpFilePath
Config.Error1 Circular reference for nested location sets : parentChildTree configFile
Config.Error1 Closing ) missing for outputFileNameExpression tag.
Config.Error1 Config cache corrupt configFile <message><errorMessage>
Config.Error1 ConfigUpdateScript not supported anymore since 2017.02. Please switch to ConfigUpdateModule
Config.Error1 Configuration file is for Archive Type <text>, expected <text>,<type>, thresholdEventsArchive)
Config.Error1 Configure a (grid) geometry for <locationId> in grids.xml, parser has not supplied a georeferenced (grid) geometry. Parameter <parameterId> will be skipped
Config.Error1 Configure a (grid) geometry for <locationId> in grids.xml, parser has not supplied a regular geometry with parameterless geo datum. Parameter <parameterId> will be skipped xml
Config.Error1 Configure a branch for <locationId> in branches.xml Parameter <parameterId> will be skipped
Config.Error1 Configured <folder> is an empty string ! configFile
Config.Error1 Configured amplitude for constituent names[n] is NaN. Output will be missing value.
Config.Error1 Configured attribute attributeId for column <columnName> not defined
Config.Error1 Configured chainage parameter id not found chainageParameterId configFile
Config.Error1 Configured default spectrum domain parameter id not found defaultSpectrumDomainParameterId configFile
Config.Error1 Configured phase for constituent names[n] is NaN. Output will be missing value.
Config.Error1 Configured simulated historical module instance simulatedHistoricalModuleInstanceId for module instance <id> not found, <configFile>
Config.Error1 Configured simulated historical parameter simulatedHistoricalParameterId for parameter id configFile
Config.Error1 Could not find location for variable : ' variableId ' for ScadaDisplay ' title '
Config.Error1 Could not find parameter for variable : ' variableId ' for ScadaDisplay ' title '
Config.Error1 Could not find parameter parameterId configFile
Config.Error1 Could not find qualifier qualifierId configFile
Config.Error1 Custom column separator not supported by export format currentExportType
Config.Error1 Custom column separator not supported by import format <currentImportType>
Config.Error1 Custom date time pattern not supported by export format currentExportType
Config.Error1 Custom date time pattern not supported by import format <currentImportType>
Config.Error1 Custom decimal separator not supported by export format currentExportType
Config.Error1 Custom decimal separator not supported by import format <currentImportType>
Config.Error1 CustomFlagSources contains a duplicate id id configFile
Config.Error1 Cyclic sub filter detected for <set> <filterConfigFile>
Config.Error1 Default synch level 0 is not allowed for external timeSeriesSet
Config.Error1 Default synch level 1 is not allowed for simulated timeSeriesSet
Config.Error1 Display node <nodeId> with display group <id> <message> configFile
Config.Error1 Do not configure an expiry time for temporary time series parameter
Config.Error1 Do not configure both constantLimit and monthLimit for validationRuleSetId configFile
Config.Error1 Do not specify a jdbc bin dir for driverClassName, this driver is always loaded from the fews bin dir
Config.Error1 Do not specify the obsolete ensembleMemberCount when ensemble configured in the workflow, <configFile>
Config.Error1 Do not use inner elements for related location relationId for location locationId configFile
Config.Error1 Do not use multiple value attribute in location constraint constraint for attribute attributeDef for location <locationId> in location set nestedLocationSetId in LocationSet locationSetId Multiple value attributes are created by attribute files that contains duplicate location ids <attributeDefConfigFile> configFile
Config.Error1 Domain parameter not configured, <configFile>
Config.Error1 Domain parameter parameter mapped to multiple external parameter ids <parLocationEnsembleIds> in <configFile>
Config.Error1 Domain parameter with id domainParameterId does not exist, <configFile>
Config.Error1 Don't configure a period in the time series for exporting. The last available pi table before or at the time 0 is exported
Config.Error1 Don't configure the unit conversions at the parameter groups level when already defined at the parameter level, <configFile>
Config.Error1 Don't use a module instance set <timeSeriesSetModuleinstances> when writing time series outside a module run <runtime>.<runningModuleConfigFile>
Config.Error1 Don't use a module instance set <timeSeriesSetModuleinstances> when writing time series outside a workflow
Config.Error1 Duplicate bookmark title in help file
Config.Error1 Duplicate branch for <branchId> configFile <configFile>
Config.Error1 Duplicate class breaks id id configFile
Config.Error1 Duplicate code used in enumeration <id> configFile
Config.Error1 Duplicate custom color found in colorScheme xml. element name: customColorName
Config.Error1 Duplicate custom color found in customColor xml. element name: <key>
Config.Error1 Duplicate custom color name customColorName
Config.Error1 Duplicate enumeration value code code for id sampleMetadataSchemaFile dBaseFileReader
Config.Error1 Duplicate files in directory structure ignore: file use: res
Config.Error1 Duplicate filter id <filterId> <filterConfigFile>
Config.Error1 Duplicate filter id <filterId> configFile <value>
Config.Error1 Duplicate location relation relationId for location locationId configFile
Config.Error1 Duplicate locationSet id <locationSetId> file <object0>
Config.Error1 Duplicate module instance id found <moduleInstanceDescriptorId> configFile
Config.Error1 Duplicate moduleInstance id moduleInstanceDescriptorId in ModuleInstanceSet name configFile
Config.Error1 Duplicate parameter group id configFile
Config.Error1 Duplicate parameter id id parametersConfigFile dBaseFileReader
Config.Error1 Duplicate property id sampleMetadataSchemaFile dBaseFileReader
Config.Error1 Duplicate property key key configFile
Config.Error1 Duplicate qualifier id id qualifiersConfigFile dBaseFileReader
Config.Error1 Duplicate shape id shapedId detected in column idAttributeName at row (i 1) dbfFile configFile
Config.Error1 Duplicate time series set id <timeSeriesSetsId> configFile
Config.Error1 End time <endTime> before start time <startTime> for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1 End time <endTime> before start time <startTime> for location with id ' locationId ' for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1 End time <endTime> equals start time (end time is excluding) <startTime> for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1 End time <endTime> equals start time (end time is excluding) <startTime> for location with id ' locationId ' for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1 End time <startTime> is listed twice for different start time and same location locationId dBaseFileReader
Config.Error1 Enumeration <id> specified for parameter group <id> does not exist, <configFile>
Config.Error1 Enumeration enumerationId configured for parameterId not found parametersConfigFile dBaseFileReader
Config.Error1 Enumeration file missing <csvFile> configFile
Config.Error1 Enumeration with id ' enumerationId ' is configured for property with key ' key ' but is not defined in whatIfScenarioFilters configuration file.
Config.Error1 Every <parallel></parallel> item in a workflow.xml file should write to different time series. Time series group is written by thread currentThreadName and existing <runningModuleConfigFile>
Config.Error1 ExplorerTaskDescriptor not found for class name: ' className ' with parameter: ' parameter '
Config.Error1 Export attribute <attributeId> does not exist. See export type currentExportType
Config.Error1 Export attribute <attributeId> does not exist. See interactive export format <name> in Explorer.xml
Config.Error1 Export folder missing or it is configured as an empty string !
Config.Error1 Export type currentExportType is not supported !
Config.Error1 ExportFileName == null
Config.Error1 Exporting for exportType currentExportType failed because of the errors in the configuration of the export folder/filename. One of the elements name, prefix or suffix should be specified
Config.Error1 Failed parsing <message> csvFile configFile
Config.Error1 Failed parsing <message> csvFile configFile<errorMessage>
Config.Error1 Failed to apply colorScheme: <message><errorMessage>
Config.Error1 Failed to find color: <color> <message><errorMessage>
Config.Error1 Failed to load logoFile configFile
Config.Error1 Failed to read customColors config: <message><errorMessage>
Config.Error1 File name <name> is too long to store in database. Reduce file name to 64 characters
Config.Error1 Filter id <filterId> not in Region Configuration.
Config.Error1 Filter id filterId for segment segmentNode is not found in the configuration
Config.Error1 Filtering of workflows is only allowed for local runs. Remove the module instance ids for node <nodeId> configFile
Config.Error1 Global property hideExternalHistoricalAfterSystemTime is not supported, this behaviour is controlled by the water coach since 2013.02
Config.Error1 Global property mapLayersCacheDir, required for gis connections configFile
Config.Error1 Global property mapLayersCacheDir, required for wms connections configFile
Config.Error1 Grid Geometry of timeSeries <dstTimeSeriesHeader> hasn't been set. Has the grid geometry been specified correctly?
Config.Error1 Help URL specified in explorer config is empty
Config.Error1 Help file specified in explorer config is empty
Config.Error1 HistoricalErrorResampler transformation, not all timeSeries have the same timeStep.
Config.Error1 If a run period is defined in the transformation, it is not allowed to configure a relative view period in the timeseriesset!. Using run period.
Config.Error1 In button settings, graphical editor is available (setTimeSeriesEditableByClicking), but all editor modes are set to false
Config.Error1 Interactive export format <interactiveExportFormatName> with type <exportType in Explorer.xml not available for interactive time series export.
Config.Error1 Invalid PAC script specified in <globalPropertiesConfigFile> <message>
Config.Error1 Invalid URL: systemHelpUrl
Config.Error1 Invalid archive event type id ' <floodEventArchiveEventTypeId> ' configured for floodEventArchiveEventTypeId in verificationAnalysisDisplay.xml configuration.
Config.Error1 Invalid archive event type id ' <floodPeriodArchiveEventTypeId> ' configured for floodPeriodArchiveEventTypeId in verificationAnalysisDisplay.xml configuration.
Config.Error1 Invalid character in ensemble id ensembleId reader
Config.Error1 Invalid comment <commentForAllValues><errorMessage>
Config.Error1 Invalid comment <commentForFirstValue><errorMessage>
Config.Error1 Invalid configuration for ScadaDisplay ' configFile '. Multiple scadaPanels defined with id ' newScadaPanelId '. Please change ScadaDisplay configuration so that each scadaPanel has a unique id.
Config.Error1 Invalid configuration for ScadaDisplay ' configFile '. Multiple scadaPanels defined with id '<id>'. Please change ScadaDisplay configurations so that each scadaPanel has a unique id.
Config.Error1 Invalid configuration for ScadaDisplay ' title ' No variable was configured for tag but multiple variables have been configured.
Config.Error1 Invalid configuration: level threshold with id ' levelThresholdId ' is used in thresholdDisplayOptions in timeSeriesDisplay configuration but is not defined in thresholds configuration.
Config.Error1 Invalid date time pattern dateTimePattern configFile
Config.Error1 Invalid file name, double spaces are not allowed: entryName
Config.Error1 Invalid file name, double spaces are not allowed: relPath
Config.Error1 Invalid file name, name is empty: entryName
Config.Error1 Invalid file name, name is empty: relPath
Config.Error1 Invalid file name, name should not start or ends with a space: entryName
Config.Error1 Invalid file name, name should not start or ends with a space: relPath
Config.Error1 Invalid file name, spaces are only allowed to separate the version number and default tag: entryName
Config.Error1 Invalid file name, spaces are only allowed to separate the version number and default tag: relPath
Config.Error1 Invalid pattern in reader
Config.Error1 Invalid qualifier id qualifierId in time series set, <configFile>
Config.Error1 Invalid relative period in filter <id> configFile
Config.Error1 Invalid sigma layer coordinate layerSigmaCoordinate for location locationId dBaseFileReader
Config.Error1 Invalid time series type for property $ modifiers
Config.Error1 Invalid timeNavigatorTimeStep configured in ScadaDisplay Config. Message was: <message><errorMessage>
Config.Error1 Invalid waterCoachExternalForecastDelaySpan delay for moduleInstanceId <message> configFile
Config.Error1 It is not allowed to configure a unit unit for parameter parameterId when there is also an enumeration id configured parametersConfigFile dBaseFileReader
Config.Error1 It is not allowed to configure a value resolution <valueResolution for parameters with a value enumeration <id> configFile
Config.Error1 It is not allowed to configure a value resolution <valueResolution> for parameters with a value enumeration <id> configFile
Config.Error1 It is not allowed to configure a value resolution res for parameters with a value enumeration id dBaseFileReader parametersConfigFile
Config.Error1 It is not allowed to specify a simulated historical parameter in another parameter group; simulatedHistoricalParameterId from id configFile
Config.Error1 Level-threshold ID <levelThresholdId> occurs more that once in the file Thresholds !, <configFile>
Config.Error1 List one rule without location id or a rule for every location in the specified time series sets for the validation rule set validationRuleSetId configFile
Config.Error1 Location Id locationId in LocationSet locationSetId does not exist, <configFile>
Config.Error1 Location Id locationId in LocationSet locationSetId is listed twice, <configFile>
Config.Error1 Location Set Id nestedLocationSetId in LocationSet locationSetId does not exist configFile
Config.Error1 Location Set Id nestedLocationSetId in LocationSet locationSetId is listed twice configFile
Config.Error1 Location description <locationDescription> for locationId can not vary over time. dBaseFileReader
Config.Error1 Location id <locationId> does not exist, <configFile>
Config.Error1 Location id is required for every grid, <configFile>
Config.Error1 Location locationId specified for validationRuleName in validation rule set validationRuleSetId is listed twice, <configFile>
Config.Error1 Location locationId specified for validationRuleName in validation rule set validationRuleSetId not available in any time series set for validation rule, <configFile>
Config.Error1 Location name <name> for locationId can not vary over time. dBaseFileReader
Config.Error1 Location relation <locationRelationId> specified in constraints in sourceId is unknown, <configFile>
Config.Error1 Location relation <locationRelationId> specified in constraints in sourceId only allowed for locations, <configFile>
Config.Error1 Location relation relationId does not exist configFile)
Config.Error1 Location set is empty locationSetId configFile
Config.Error1 Location short name <shortName> for locationId can not vary over time. dBaseFileReader
Config.Error1 Location specified in validation rule set does not exist: locationId in validationRuleSetId configFile
Config.Error1 Location with id locationId listed twice in dBaseFileReader
Config.Error1 LocationSet id <locationSetId> <message> configFile<errorMessage>
Config.Error1 Logo file does not exist <logoImageFile> configFile
Config.Error1 MA coefficients must be successive list starting with Order 1!
Config.Error1 Module instance <moduleInstanceId> not found, <configFile>
Config.Error1 Module instance set with id moduleInstanceSetId does not exist, <configFile>
Config.Error1 Module instance with id moduleInstanceId does not exist, <configFile>
Config.Error1 ModuleInstance id <moduleInstanceId> not in Region Configuration.
Config.Error1 ModuleInstanceDescriptor Id moduleInstanceDescriptorId in ModuleInstanceSet <name> does not exist, <configFile>
Config.Error1 ModuleInstanceSet <id> is empty, <configFile>
Config.Error1 More than one variables configured but no variable passed to the tag for ScadaDisplay ' title '
Config.Error1 Multiple dependencies found oldId and idMapId
Config.Error1 Multiple locations with the same layer sigma coordinate found res ';' location
Config.Error1 Multiple shape types found for <connectionFactory> '_' layerName : Configure shape type to filter for <foundShapeTypes>
Config.Error1 Multiple threshold value sets configured with id <id>
Config.Error1 Multiple value attribute def for owner can not be exported
Config.Error1 Negative synch level res is not allowed for time series set parameter configFile
Config.Error1 Negative value resolution not allowed id dBaseFileReader parametersConfigFile
Config.Error1 No Id mapping found for domain parameter parameter in <parLocationEnsembleIds> in <configFile>
Config.Error1 No closing % for outputFileNameExpression tag.
Config.Error1 No config available for <moduleInstanceDescriptorId>
Config.Error1 No configuration available.)
Config.Error1 No filter found in filters.xml with id filterId , <configFile>
Config.Error1 No rating curve found for location: <locationId>
Config.Error1 No unit conversion found for <unit> to <classBreaksUnit> or vice versa.
Config.Error1 No unit conversion found from configUnit to systemUnit in <unitConversionConfigFile>
Config.Error1 No x,y coordinates configured for location
Config.Error1 No z coordinate configured for location
Config.Error1 Non equidistant time step not allowed when aggregation time spans configured, <configFile>
Config.Error1 Not a valid path name file configFile <message><errorMessage>
Config.Error1 Not allowed to specify multiple grids for one location locationId configFile
Config.Error1 Not more than 64 grids are allowed in a single plot plotId, will only show 64.
Config.Error1 Number of cols/rows ( <cols> ',' <rows> ) parsed is not the same as configured for location <locationId> ( <cols> ',' <rows> ) in grids.xml. Parameter <parameterId> will be skipped
Config.Error1 Number of points ( <size> ) parsed is not the same as configured for location <locationId> ( <size> ) in configFile. Parameter <parameterId> will be skipped
Config.Error1 Number of shapes ( <shapeSize> ) should be the same as the number of rows ( <rows> ) in <virtualFilename>.shp
Config.Error1 Only 9 is allowed as synch level for temporary time series set parameter configFile
Config.Error1 Only line and polygon shape files are supported in this context shapeFileReader
Config.Error1 Only one threshold value set allowed per time series header defined in thresholdValueSet and in firstApplicable <thresholdValueSetConfigFile>
Config.Error1 Orthographic/Gnomonic projection not allowed when using OSM/Tiled based layers, <configFile>
Config.Error1 PAC script entry point FindProxyForURL not found. Skipping script! url
Config.Error1 PAC script is empty. Skipping script! url
Config.Error1 PCRaster 2.1 32 bit libraries could not be found.
Config.Error1 Parameter csv file missing <csvFile> configFile
Config.Error1 Parameter csv file missing attributeCsvPath configFile
Config.Error1 Parameter parameter configured twice in extern units, <configFile>
Config.Error1 Parameter parameterId from attributes file not present in parameters file dBaseFileReader baseConfigFile
Config.Error1 Parameter with id parameterId does not exist, <configFile>
Config.Error1 ParameterId parameterId can only be defined once. configFile
Config.Error1 Parent attribute parentId not found configFile <configFile>
Config.Error1 Parent location circular reference detected for <locationId> <configFile>
Config.Error1 Parent location id not found parentLocationId for <locationId> <configFile>
Config.Error1 Parent location id parentId for location <locationId> can not change over time dBaseFileReader
Config.Error1 Parent qualifier circular reference detected for <qualifierId> <configFile>
Config.Error1 Period period is listed twice for same location locationId dBaseFileReader
Config.Error1 Persistent id configId listed twice reader locationSetFile
Config.Error1 Persistent id persistentId listed twice reader locationSetFile
Config.Error1 Please delete obsolete <rootConfigFileName>
Config.Error1 Please remove JMS configuration from client config xml
Config.Error1 Polygon file <filename> <message> configFile<errorMessage>
Config.Error1 Probably a connection with the deprecated SIP server was made. Please upgrade the serverUrl to the latest SIP server<errorMessage>
Config.Error1 Properties file missing <filename> configFile
Config.Error1 Qualifier csv file missing <csvFile> configFile
Config.Error1 Qualifier id is too long (max 64) id configFile
Config.Error1 Qualifier with id qualifierId does not exist, <configFile>
Config.Error1 QualifierId qualifierId can only be defined once. configFile
Config.Error1 Rate-threshold ID <rateThresholdId> occurs more that once in the file Thresholds !, <configFile>
Config.Error1 RatingCurve id <ratingCurveId> <message> configFile<errorMessage>
Config.Error1 Relation relationId in attributeId attribute specified in constraints in sourceId does not exist , <configFile>
Config.Error1 Serializer class <serializerClass> of interactive export format <interactiveExportFormatName> in Explorer.xml not available for interactive time series export.
Config.Error1 Shape id <shapeId> does not exist in column idAttributeName dbfFile configFile
Config.Error1 Sigma coordinate is missing for location
Config.Error1 Sigma coordinate missing for one child location for parent parentLocation
Config.Error1 Sigma coordinate not allowed when imported grid does not has sigma layers location
Config.Error1 Specified config file displayConfigFileName for explorer task <taskName> not found explorerConfigFile
Config.Error1 Specified grid corners for grid <locationId> are not valid for geoDatum configFile
Config.Error1 Specify absolute path for global property mapLayersCacheDir and not cacheDir configFile
Config.Error1 Specify config units in parameters.xml when units in loop up tables are different from parameters
Config.Error1 Start time <startTime> is listed twice for different end time and same location locationId dBaseFileReader
Config.Error1 Sub filter <subFilterId> occurs more that once for <parentFilterId> <parentFilterConfigFile>
Config.Error1 Synch level 0 is not allowed for external parameter configFile
Config.Error1 Synch level 1 is not allowed for simulated parameter configFile
Config.Error1 Synch level 5 is not allowed in workflow <moduleConfigFile>
Config.Error1 Synch level 5 is not allowed in workflow runTime.<runningModuleConfigFile>
Config.Error1 Synch level requiredSynchLevel is required for timeSeriesSet
Config.Error1 Synch levels [90-100] are reserved for internal use in time series set parameter configFile
Config.Error1 The configured markerRotationParameter parameterId does not exist.
Config.Error1 The historical module instance should be configured for all or none of the members for group group moduleInstanceDescriptor '>' historical <configFile>
Config.Error1 The provided telegram bot token (ReportError.telegramBotToken) must be encrypted before it can be used, please try replacing it with this encrypted token: encryptedToken
Config.Error1 The provided telegram bot token is invalid (ReportExport.telegramBotToken), see also: https://core.telegram.org/bots/api#authorizing-your-bot
Config.Error1 The provided telegram.org chat_id is invalid (ReportExport.telegramChatId), see also: https://core.telegram.org/bots/api
Config.Error1 The public server ssl certificate isn't present in the client.truststore or not valid anymore. In the first case import the latest server certificate in the client.truststore.<errorMessage>
Config.Error1 The referenced historical module instances in group group should be part of another group moduleInstanceDescriptor '>' historical <configFile>
Config.Error1 The start and end times for <locationId> don't result in a continuous period <inputFilename> stringForGaps
Config.Error1 The start and end times for attributes of <locationId> don't result in a continuous period <inputFilename> stringForGaps
Config.Error1 Threshold internal does not exist., <configFile>
Config.Error1 Threshold value set thresholdValueSetId applies to time series with parameters with different units.
Config.Error1 ThresholdGroup id ' groupId ', configured with element defaultThresholdGroupId, does not exist
Config.Error1 Time dependent constraint location Set Id nestedLocationSetId in LocationSet locationSetId is not allowed configFile
Config.Error1 Time series set with id timeSeriesSetsId in filter <id> not found
Config.Error1 Time step id id <message> configFile<errorMessage>
Config.Error1 Time tolerance for parameter listed twice parameter
Config.Error1 Topology. Module instance <moduleInstanceDescriptorId> not part of workflow <workflowId>
Config.Error1 Transformation id <transformationId> <message> configFile<errorMessage>
Config.Error1 Two buttons for same position configured (row= <row>, column= <col> ) for panel <id> configFile
Config.Error1 Two files with same name detected configFile existingFile
Config.Error1 Two gis connections with same id specified id configFile
Config.Error1 Two thresholds with the same external id thresholdId configured in threshold id mapping for the same location locationId
Config.Error1 Two wms connections with same id specified id configFile
Config.Error1 Undefined attribute <id> specified for locationFilterAttributeId configFile)
Config.Error1 Undefined relation <id> specified for locationFilterAttributeId, <configFile>
Config.Error1 Unit conversion from inputUnit to outputUnit not found in <unitConversionsConfigFile> configFile
Config.Error1 Unknown cell method <text> given for parameter id <id> in table table
Config.Error1 Unknown cell method <text> given for parameter id parameterId dBaseFileReader
Config.Error1 Unknown comment tag res
Config.Error1 Unknown default flag source id flagSourceId in workflow
Config.Error1 Unknown flag source column flagSourceColumnId in workflow
Config.Error1 Unknown flag source column flagSourceColumnId specified in filter, <configFile>
Config.Error1 Unknown location id <locationId> <filename>
Config.Error1 Unknown location set id locationSetId for location loop <name> configFile
Config.Error1 Unknown location set locationSetId configFile
Config.Error1 Unknown parameter id ' uvAmplitudeParameterId ' configured for uvAmplitudeParameterId in gridPlot.
Config.Error1 Unknown parameter id ' uvDirectionParameterId ' configured for uvDirectionParameterId in gridPlot.
Config.Error1 Unknown parameter id <parameterId> <filename>
Config.Error1 Unknown parameter id parameterId
Config.Error1 Unknown parameter type parameterTypeName dBaseFileReader parametersConfigFile
Config.Error1 Unknown qualifier id qualifierId configFile
Config.Error1 Unknown relation id <locationRelationId> configFile
Config.Error1 Unknown standard name <text> given for parameter id <id> in table table
Config.Error1 Unknown standard name <text> given for parameter id parameterId dBaseFileReader
Config.Error1 Unknown standard name modifier <text> given for parameter id <id> in table table
Config.Error1 Unknown standard name modifier test given for parameter id parameterId dBaseFileReader
Config.Error1 Unknown standard name standardNameText given for parameter id id configFile
Config.Error1 Unknown sub filter id specified <id> for filter <parentFilterId> <parentFilterConfigFile>
Config.Error1 Unknown vertical positive direction <text> given for parameter id <id> in table table
Config.Error1 Unresolved property key(s) : <unresolvedProperties> configFile
Config.Error1 Validation ruleSet <validationRuleSetId> applies to time series with parameters with differing units Using conversion from configUnit to internalUnit for validationRuleSet values
Config.Error1 ValidationRuleSetCommand type command expected. Found: <command>
Config.Error1 Value type <valueTypeId> not configured, <configFile>
Config.Error1 Value type valueTypeId not configured dBaseFileReader sampleMetadataSchemaFile
Config.Error1 WMS layer. JPG image format can not be specified in combination with transparent=true
Config.Error1 When child locations have a layer sigma coordinate the parent location should not have a sigma layer coordinate parentLocation
Config.Error1 When coordinates are not available in dbf file for location set creatorLocationSetId the shape file is required locationSetFile dBaseFileReader
Config.Error1 When specifying type unit outputUnit the type UnitConversionsId should also be specified, <configFile>
Config.Error1 When writing time series for module instance set <timeSeriesSetModuleinstances> the running module instance creatorModuleInstanceDescriptor should be part of this set <runtime>.<runningModuleConfigFile> <runtime>.<runningModuleConfigFile>
Config.Error1 Writing non-temporary output time series header for a module that is only allowed to write temporary output time series.
Config.Error1 area is missing for locationId dBaseFileReader locationSetFile
Config.Error1 area is missing in column areaAttributeName at row (shapeIndex 1) dbfFile configFile
Config.Error1 attributeId attribute specified in constraints in sourceId does not exist , <configFile>
Config.Error1 attributeId attribute specified in constraints in sourceId is not a type attribute, <configFile>
Config.Error1 barrier id <barrierId> <message> configFile<errorMessage>
Config.Error1 branch id <branchId> <message> allLocations<errorMessage>
Config.Error1 can not unmarshal default unit conversion config file unitConversionsId configFile unitConversionsFile<errorMessage>
Config.Error1 cannot configure both maximumSnapDistance and maximumVerticalSnapDistance in generalAdapter importNetcdfActivity config.
Config.Error1 cannot configure both maximumSnapDistance and maximumVerticalSnapDistance in timeSeriesImport config.
Config.Error1 cannot find unit conversion config file unitConversionsId configFile
Config.Error1 chm help file not supported since 2016.01. Use pdf help file instead file
Config.Error1 colorScheme defaultColorSchemeId not defined in colorSchemes
Config.Error1 configId mapping not used configFiles[i]
Config.Error1 decision id <id> <message> configFile<errorMessage>
Config.Error1 default filter id defaultFilterId not found, <configFile>
Config.Error1 defaultColorScheme defaultColorSchemeId not defined in colorSchemes
Config.Error1 delay in time series set not supported in combination with daylight savings time step: <timeStep>. Ignoring configured delay.
Config.Error1 display id ' <nodeId> ' was configured where a display group id should be configured.
Config.Error1 display id ' displayGroupId ' was configured where a display group id should be configured
Config.Error1 display id <descriptorId> <message> configFile<errorMessage>
Config.Error1 display instance id <descriptorId> <message> configFile<errorMessage>
Config.Error1 duplicate accelerator <accelerator> defined for explorer task.
Config.Error1 duplicate barrier id <barrierId> configFile
Config.Error1 duplicate decision id <decisionId> configFile
Config.Error1 duplicate flag source column id <columnId> configFile
Config.Error1 duplicate flag source storage key <storageKey> configFile
Config.Error1 duplicate module instance set id: <moduleInstanceId>
Config.Error1 duplicate parameter id <parameterId> parameter group id <id> configFile
Config.Error1 duplicate property <propertyDefId> <config> <config> <configFile>
Config.Error1 duplicate scale in line widths for layer name configFile
Config.Error1 duplicate stateDefinition id stateDefinitionId configFile
Config.Error1 duplicate stateTransition id <stateTransitionId> configFile
Config.Error1 duplicate stateTransitionValue with Variable id <stateVariableId> configFile
Config.Error1 duplicate stateValue id <stateValueId> configFile
Config.Error1 duplicate stateVariable id <stateVariableId> configFile
Config.Error1 duplicate stateVariableValue id stateVariableId configFile
Config.Error1 duplicate time step id id configFile
Config.Error1 duplicate value type <valueTypeId> <configFile> <configFile> <configFile>
Config.Error1 duplicate workflow id <id> configFile <configFile>
Config.Error1 error for id <message> configFile<errorMessage>
Config.Error1 filter id <filterId> <message> configFile<errorMessage>
Config.Error1 filter id <id> parameter id <parameterId> <message> configFile
Config.Error1 filter id <id> parameter id <parameterId> <message> configFile<errorMessage>
Config.Error1 flag source id flagSourceId configured in the outputFlagSource does not exist for function transformation interpolationSerial linear
Config.Error1 for export type alert the fileName has to be set for the export. Location based export is not supported.
Config.Error1 for the chosen export type the fileName has to be set for the export. Location based export is not supported for type currentExportType
Config.Error1 forecastSelection Period for export activity not valid: <message><errorMessage>
Config.Error1 grid/location id locationId unknown, <configFile>
Config.Error1 group id groupComplexTypeId <message> configFile<errorMessage>
Config.Error1 icon for scada display not found: iconFile
Config.Error1 ignoreCommentPattern is not a valid regular expression
Config.Error1 invalid timeNavigatorRelativePeriod or timeNavigatorRelativePeriodVariables configured in ScadaDisplay ' configFile '. This scadaDisplay will be shown without a timeNavigatorToolbar. Message was: <message><errorMessage>
Config.Error1 is not a number for column column <expression> configFile dBaseFileReader
Config.Error1 localDataStorePoolDir is no longer supported since 2017.02
Config.Error1 localDatastoreFormat firebird only allowed for windows and linux remove from global.properties and client config
Config.Error1 location <id> has invalid coordinates x= <X> y= <Y> for <geoDatum> resourceLocationSetId configFile
Config.Error1 location id <id> and parent location id are not allowed to be the same, <configFile>
Config.Error1 location id <id> listed in two files configFile <configFile>
Config.Error1 location id <id> listed twice in, <configFile>
Config.Error1 location id <locationId> <message> configFile<errorMessage>
Config.Error1 location id <locationId> and parent location id are not allowed to be the same in location set locationSetFile
Config.Error1 location id <locationId> read from csvFile in location set creatorLocationSetId already defined in locations set <locationSetId> <configFile> locationSetFile
Config.Error1 location id is too long (max 64) id configFile
Config.Error1 location loop for location set loopLocationSet not supported in combination with nested workflows, <configFile>
Config.Error1 location relation <relationId> already created for location sourceLocationId. First value ids[index] will be used instead of id
Config.Error1 maximum horizontal snap distance is too large. Multiple locations found res ';' location
Config.Error1 maximum vertical snap distance is too large. Multiple locations found res ';' location
Config.Error1 module data set exportModuleDataSetName does not exist <generalAdapterConfigFile>
Config.Error1 module id <descriptorId> <message> configFile, e1
Config.Error1 module instance set id <moduleInstanceId> <message> configFile<errorMessage>
Config.Error1 more than one upIntId, downIntId or intId have the value downIntId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file.
Config.Error1 more than one upIntId, downIntId or intId have the value downIntId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file., <configFile>
Config.Error1 more than one upIntId, downIntId or intId have the value intId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file., <configFile>
Config.Error1 more than one upIntId, downIntId or intId have the value upIntId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file., <configFile>
Config.Error1 multiple threshold groups defined with id ' groupId '. Please change thresholds configuration so that each threshold group has a unique id., <configFile>
Config.Error1 multiple thresholds defined with id ' thresholdId '. Multiple thresholds cannot have the same id. Also thresholds that are in different threshold groups cannot have the same id. configFile
Config.Error1 multiple thresholds defined with id ' thresholdId '. Multiple thresholds cannot have the same id. Also thresholds that are in different threshold groups cannot have the same id., <configFile>
Config.Error1 no relation locationRelation defined for location
Config.Error1 no standard name configured for <parameter> in parameters.xml
Config.Error1 number of rows in dbase file ( <rows> ) should be the same as the number of polygons/lines in shape file ( <shapeSize> for location set creatorLocationSetId locationSetFile dBaseFileReader
Config.Error1 parameter group id id <message> configFile<errorMessage>
Config.Error1 parameter id <id> read from dBaseFileReader already defined in <configFile>
Config.Error1 parameter id <parameterId> parameter group id <id> <message> configFile<errorMessage>
Config.Error1 parameter id is too long (max 64) id configFile
Config.Error1 parameterId or areaFunction not defined for Normalized Flow statistical function
Config.Error1 parameters should be passed between () for outputFileNameExpression tag.
Config.Error1 qualifier id <id> listed twice, <configFile>
Config.Error1 qualifier id <id> read from dBaseFileReader already defined in <configFile>
Config.Error1 quickViewStatisticalFunction <label> is configured more than once
Config.Error1 rating curve discharge parameter id not found ratingCurveDischargeParameterId configFile
Config.Error1 rating curve stage parameter id not found ratingCurveStageParameterId configFile
Config.Error1 scale should be specified for line width when using multiple line widths for layer name configFile
Config.Error1 shape file <shapeFile> <message> <esriShapeFile> configFile<errorMessage>
Config.Error1 specify 12 month limits not monthLimitCount for limitsName in validationRuleSetId configFile
Config.Error1 stateDefinition id <stateDefinitionId> <message> configFile<errorMessage>
Config.Error1 stateDefinition variableId variableId <message> configFile<errorMessage>
Config.Error1 stateTransition id <startStateValueId> to <endStateValueId> <message> configFile<errorMessage>
Config.Error1 stateTransitionValue with Variable id <stateVariableId> <message> configFile<errorMessage>
Config.Error1 stateValue id <stateValueId> <message> configFile<errorMessage>
Config.Error1 stateValue id id <message> configFile<errorMessage>
Config.Error1 stateVariable id <stateVariableId> <message> configFile<errorMessage>
Config.Error1 stateVariable variableId variableId <message> configFile<errorMessage>
Config.Error1 table background colors: Specified end time <endTime> should be after specified start time <startTime> configFile
Config.Error1 threshold warning level with id ' downWarningLevelId ' not defined. If no thresholdWarningLevels configuration file is used, then this error can occur if more than 20 warning levels are used. configFile
Config.Error1 threshold warning level with id ' downWarningLevelId ' not defined. If no thresholdWarningLevels configuration file is used, then this error can occur if more than 20 warning levels are used., <configFile>
Config.Error1 threshold warning level with id ' upWarningLevelId ' not defined. If no thresholdWarningLevels configuration file is used, then this error can occur if more than 20 warning levels are used., <configFile>
Config.Error1 time step <id> contains too many elements to store in database <encodedTimeStep> configFile
Config.Error1 time step id is required for all time steps, <configFile>
Config.Error1 timeSeriesDisplayConfig.xml is not valid. Not all required buttonSetting elements are set. please refer to the TimSeriesDisplay.xsd for validation
Config.Error1 unknown column id columnId specified for time of validity configFile
Config.Error1 unknown flag source flagSource specified for time of validity configFile
Config.Error1 use < <localName> key= key value= value /> instead of < <localName> value= value key= key /> reader
Config.Error1 validation exception. clientStore element is not allowed according to clientConfig.xsd clientConfigFile
Config.Error1 validation rule set id <validationRuleSetId> <message> configFile<errorMessage>
Config.Error1 validationRuleName for location <locationId> not specified in validation rule set validationRuleSetId. Limits for all locations in validation rule time series sets should be listed, <configFile>
Config.Error1 valueResolutionUnit valueResolutionDisplayUnit should equal the system <displayUnit> or display unit <displayUnit> id dBaseFileReader parametersConfigFile
Config.Error1 valueResolutionUnit valueResolutionUnit should equal the system <parameterGroupUnit> or display unit <parameterGroupDisplayUnit> <id> configFile
Config.Error1 valueResolutionUnit valueResolutionUnit should equal the system parameterGroup.unit or display unit parameterGroup.displayUnit <id> configFile
Config.Error1 weight attribute weightAttributeId for combined time series statistical function should be of type number
Config.Error1 workflow id <descriptorId> <message> configFile<errorMessage>
Config.Error1 x and y columns should be configured for location set creatorLocationSetId when shape file contains empty/NULL shape. Location locationId locationSetFile dBaseFileReader
Config.Error1 x or y is missing for locationId dBaseFileReader locationSetFile
Config.Error1<configType> constraint error in filter with id filterId <message> configFile<errorMessage>
Config.Error1Attribute <attributeId> already defined somewhere else as attribute of other type <source> configFile
Config.Error1Attribute <attributeId> is listed twice <source> configFile
Config.Error1Attribute attributeId for <expression> already defined in other parameter or location set as attribute of other type configFile<errorMessage>
Config.Error1Can not find column ' columnName ' in <expression> dBaseFileReader Available columns <columnNames> configFile
Config.Error1Can not find dbase column ' columnName ' in <expression> dBaseFileReader configFile
Config.Error1Can not find fileNameWithoutExt.dbf
Config.Error1Can not find location <locationId> in displayConfigFile)
Config.Error1Can not find name
Config.Error1Cold file name format should be name <optional> space version </optional> <optional> space default </optional> entryName
Config.Error1Cold file name format should be name <optional> space version </optional> <optional> space default </optional> file
Config.Error1Cold state file name format should be moduleInstanceId space groupId <optional> space version </optional>.zip entryName
Config.Error1Cold state file name format should be moduleInstanceId space groupId <optional> space version </optional>.zip file
Config.Error1Concatenated qualifier ids contain too many characters (max=64) <array> configFile
Config.Error1Directory to dump to zip not exists res configFile
Config.Error1Do not use inner elements for attribute attributeId for <expression> configFile
Config.Error1Dump file included in dump source directory list Source: res Dest: dstDir configFile
Config.Error1Duplicate attribute attributeId for <expression> configFile
Config.Error1Duplicate group id groupId configFile
Config.Error1Duplicate qualifiers in time series set TextUtils.join(array, ',') configFile
Config.Error1Duplicated ThresholdValueSet id found: <setId> configFile <value>
Config.Error1Error in time series sets of additional time series with name <additionalTimeSeriesName> <message> configFile<errorMessage>
Config.Error1Error in time series sets with id <timeSeriesSetsId> <message> configFile<errorMessage>
Config.Error1Invalid expression ' expression ' in <expression> dBaseFileReader configFile
Config.Error1Invalid group id groupId configFile
Config.Error1Invalid moduleInstanceId id configFile
Config.Error1Invalid time zone for <locationSetId> locationSetsConfigFile
Config.Error1Location constraint error in display <name> <message> configFile
Config.Error1Location set with id locationSetId does not exist, <configFile>
Config.Error1Location with id locationId does not exist, <configFile>
Config.Error1LocationRelation with id locationRelationId does not exist, <configFile>
Config.Error1Module id does not exist: moduleId configFile
Config.Error1Multiple threshold warning levels defined with id ' id '. Please change threshold warning levels configuration so that each threshold warning level has a unique id., <configFile>
Config.Error1Only one polygon per location can be specified. Location id <locationId> is specified twice, <configFile>
Config.Error1Relation <relationId> in location set creatorLocationSetId is listed twice locationSetFile
Config.Error1ThresholdValueSet id <setId> <message> configFile<errorMessage>
Config.Error1Time series stored in external database maps to multiple FEWS time series sets module instance Id moduleInstanceId external res internal timeSeriesGroup internal lastMappedTimeSeriesGroup
Config.Error1Unknown attribute specified attributeId for layer id configFile
Config.Error1Unknown location relation specified locationRelationId for layer id configFile
Config.Error1Unknown region config file type configFile)
Config.Error1Unknown system config file type configFile)
Config.Error1qualifier id <qualifierId> and parent qualifier id are not allowed to be the same in location set qualifiersConfigFile dBaseFileReader
ConfigEditor.Error175 Cannot access IdMap with id: idMapId<errorMessage>
ConfigEditor.Error175 Cannot create command input object for AddLocationCommand<errorMessage>
ConfigEditor.Error175 Cannot create command input object for IdMap2CommandInput: idMapId<errorMessage>
ConfigEditor.Error175 Cannot create command input object for IdMapCommandInput: idMapId<errorMessage>
ConfigEditor.Error175 Cannot create command input object for ValidationRuleSets command with id: <validationRuleSetId><errorMessage>
ConfigEditor.Error175 Cannot edit IdMap (id= <idMapId> ) entry for included location (id= <locationId> ) and parameter (id= <parameterId> )<errorMessage>
ConfigEditor.Error175 Cannot edit IdMap, id= <idMapId>, entry for included location, id= <locationId><errorMessage>
ConfigEditor.Error175 Cannot edit ValidationRuleSet (id= <validationRuleSetId> ) entry for location (id= <locationId> ).<errorMessage>
ConfigEditor.Error175 IdMapCommand or IdMap2Command type command expected. Found: <command>
ConfigEditor.Error175 Invalid IdMap type in idMap: <idMapId>
ConfigUpdate.Error190 <message><errorMessage>
ConfigUpdate.Error190 ConfigUpdateScriptController does not support method 'commitWithReview!
ConfigUpdate.Error190 Error running script : <scriptPath> Message: <message><errorMessage>
ConfigUpdate.Error190 Script directory ' <scriptDir> ' defined in ConfigUpdateScriptConfig file ' moduleInstanceDescriptor ' does not exist.
ConfigValidate.Error205 validation error occurred for resource: resource ! <message><errorMessage>
DataStore.Error2 <missingCount> of <count> database flood period rows are missing in the index (first missing firstMissingSystemActivity firstMissingPeriodId
DataStore.Error2 <missingCount> of <count> database historical events rows are missing in the index (first missing firstMissingSystemActivity firstMissingEventId
DataStore.Error2 <missingCount> of <count> database module run rows are missing in the index file
DataStore.Error2 <missingCount> of <count> database module run tables are missing in the index (first missing firstMissingTaskRunId firstMissingFileId
DataStore.Error2 <missingCount> of <count> database sample rows are missing in the index (first missing firstMissingRowId
DataStore.Error2 <missingCount> of <count> database system activity rows are missing in the index (first missing firstMissingTaskRunId
DataStore.Error2 <missingCount> of <count> database task rows are missing in the index (first missing firstMissingTaskId
DataStore.Error2 <missingCount> of <count> database task run completion rows are missing in the index file (first missing firstMissingTaskRunId
DataStore.Error2 <missingCount> of <count> database task run rows are missing in the index (first missing firstMissingTaskRunId
DataStore.Error2 <missingCount> of <count> database warm state rows are missing in the index file (first missing firstMissingTaskRunId
DataStore.Error2 <missingCount> of <count> database what-if rows are missing in the index (first missing firstMissingWhatIfId
DataStore.Error2 <missingCount> of <count> modifier attribute rows are missing in the index (first missing firstMissingModifierDescriptor firstMissingAttributeModifierId firstMissingLocationId firstMissingAttributeId
DataStore.Error2 <missingCount> of <count> modifier row are missing in the index (first missing firstMissingTaskRunId firstMissingModifierId
DataStore.Error2 <missingCount> of <count> module parameter modifier rows are missing in the index (first missing firstMissingModifierDescriptor
DataStore.Error2 Cannot find id map config file for idMapId
DataStore.Error2 Cannot find unit conversions config file for unitConversionsId
DataStore.Error2 Cannot unmarshal task properties for task <taskId><errorMessage>
DataStore.Error2 Failed importing configFile, firstException
DataStore.Error2 Invalid aggregation period id id
DataStore.Error2 Two default config files found with the same name <url> <url>
DataStore.Error2 error while compacting local database <message><errorMessage>
DataStore.Error2 errorMsg
DataStore.Error2 invalid stateSearchRelativePeriod in task run properties taskRunDescriptor <message>
DataStore.Error2 invalid time0 time0Text in task run properties taskRunDescriptor
DataStore.Error2 missingCount[0] of (missingCount[0] notScannedYet[0] indexRowCount) database time series rows are missing in the index (first missing global row id firstMissingRowId[0], task run id firstMissingSystemActivityDescriptor[0], [localModificationTime][localAvailableTime] <firstMissingRowIdModificationTime>) , firstMissingTimeSeriesGroup[0]
EAImport.Error235 Could not delete file: <message>
EAImport.Error235 EA.Import: Mapping to multiple time series not supported: newKey
EAImport.Error235 Error adding import status: <message><errorMessage>
ErrorModel.InvalidData250 All values missing for simulated time series: simulatedTimeSeriesInfo Writing original simulated values to datastore.
Export.Error265 Folder does not exist and/or cannot be created: res <message> configFile
FewsExplorer.Error280 <message><errorMessage>
ForecastingShell.Error310 <pathWarningMessage>
ForecastingShell.Error310 Execute query sql failed: <message><errorMessage>
ForecastingShell.Error310Updating root config files failed: <message><errorMessage>
ForecastingShell.Failed325 Compact cache failed: <message><errorMessage>
ForecastingShell.Failed325 FS should not run under same user as any OC, uncommitted modifiers found for user <user>
ForecastingShell.Failed325 Refresh datastore failed: <message><errorMessage>
ForecastingShell.Failed325 Remove deleted runs datastore failed: <message><errorMessage>
GA.Error370 Can not delete an existing directory dir
GA.Error370 Can not delete an existing file, file not properly closed by adapter or model <message> file
GA.Error370 Can not delete an existing file, file not properly closed by adapter or model <message> filter
GA.Export.Parameters2741Cannot unmarshal original model parameter file ' parameterFile ', to add the modifiers. This file wil be exported as it is.<errorMessage>
GA.Import.MapStack2742 Mapping to multiple time series not supported: fewsHeader
GA.Zipping.Error2743 Could not zip directory <srcDir><errorMessage>
Import.Error400 <message><errorMessage>
Import.Error400 Can not read from: <hostName> ':' <port> for connectionString<errorMessage>
Import.Error400 Host does not exist: <hostName> for connectionString<errorMessage>
Import.Error400 Invalid xml file. Valid time is required for external forecast modifiers file
Import.Error400 No internet/intranet connection available for connectionString<errorMessage>
Import.Error400 No network connection available<errorMessage>
Import.Error400 Total size of files in import folder exceeds allowed maximum of <maxSize> MB folderObject
Import.Error400 current.gridStartPoint is an unknown gridCorner type. Use one of the following: <GridCornerTypes>
Import.Error400 error occurred when attempting to insert <importFile> into table tableName<errorMessage>
Import.Error400 import <dir> failed: <message><errorMessage>
Import.Error400 import <serverUrl> failed: <message><errorMessage>
Import.Error400 import folder folderObject failed: <message><errorMessage>
Import.Error400 import from connection failed: <message><errorMessage>
Import.Error400 import from server failed: <message><errorMessage>
Import.Error400 import serverUrlString failed: <message><errorMessage>
Import.Error400 importing wapdaTelemetric: no resp. wrong parameter qualifier specified ( <column>) in the id-mapping for loc/par locId / parId. My means of parameter qualifier the mandatory column number must be specified !
Import.Error400 message
Import.Error400 message <message><errorMessage>
LocalDataStore.Error415 <errorMessage>
LocalDataStore.Error415 <message><errorMessage>
LocalDataStore.Error415 Can not close cacheFile<errorMessage>
LocalDataStore.Error415 Can not write indexFile<errorMessage>
LocalDataStore.Error415 can not validate time series float array<errorMessage>
LocalDataStore.Error415 error while compacting index files: <message><errorMessage>
LocalDataStore.Error415 error while running rolling barrel <message><errorMessage>
LocalDataStore.Error415 msg, <errorMessage>
LogEntriesArchiver.Error430 Configuration file does not specify Archive Type, expected <text>,LogEntries)
LogEntriesArchiver.Error430 Configuration file is for Archive Type <text>, expected <text>,<type>, LogEntries)
LogEntriesArchiver.Error430 Initialisation failed, cannot perform Archive Run.
LogEntriesArchiver.Error430 No LogEntries Archive Run configuration defined
LogEntriesArchiver.Error430 No LogEntries Import or Export Archive Run configuration defined
LookupWhatIfScenario.Failed460 - LookupWhatifScenario Failed - {0})<errorMessage>
MC_ALERTER_ALARM_MODULE.Error3000 <message>
Manual.Error475 <modelMessage>
Manual.Fatal490 <modelMessage>
ManualForecast.Failed505 Sending manual forecast <{0}> failed: {1}), firstInfo, <message>)<errorMessage>
ManualForecast.Failed505 Sending manual forecast <{0}> failed: {1})<errorMessage>
MapCache.Error520 Can not create map cache file cacheFile from resource resource <message> configFile<errorMessage>
MapCacheDir.Error535 Can not create map cache dir cacheDir <errorMessage>
RdbmsExport.ConnectError550Could not connect to target RDBMS
RdbmsExport.ConnectError550JDBC driver not found: <jdbcDriverClass>
ReportExport.DeleteFailed565 <message><errorMessage>
ReportSummary.Error580 Error reading icon srcPath <message><errorMessage>
ReportSummary.Error580 Icon srcPath not found
RerunForecast.Failed595 Rerunning forecast task <{0}> failed: {1})<errorMessage>
SYSLOG.MC4056 Fatal exception in <processName>, disabling automatic restart by using exit code 0
SYSLOG.RemoteMCLost4057 Remote mc remoteMcId
SYSLOG.RemoteMCOk4058 Remote mc <remoteMcId> due to manual failover
TM.LauncherMissed3260 Couldn't launch <text> (TaskId: <text>; WorkflowId: <text>): Invalid FSS mapping or missing FSS Group for this workflow.,<taskId>, <taskId>, <workflowId>)
TaskRun.Failed670 Task <workflowId> with ID <taskRunId> failed : Could not flush datastore: <message><errorMessage>
TaskRun.Failed670 Task <workflowId> with ID <taskRunId> failed : message<errorMessage>
TaskRun.LocalDataStoreSizeCritical685 Local Datastore size at forecasting shell <partition> is critical. Task <workflowId> with ID <taskRunId> will not be run.
TaskRun.LocalDataStoreSizeCritical685 Local Datastore size is critical. Task <workflowId> with ID <taskRunId> will not be run.
TaskRun.PartlyFailed700 Workflow <id> with task run id <taskRunId> partly failed because activity <activityId> failed, <message> configFile<errorMessage>
TaskRun.PartlyFailed700 Workflow <workflowId> with task run id <taskRunId> partly failed because activity <activityId> failed, <message> configFile<errorMessage>
TaskRun.PartlyFailed700 Workflow <workflowId> with task run id <taskRunId> partly failed because activity <activityId> failed, <message><errorMessage>
TaskRun.RegisterConfigRevision715 Unable to determine configuration revision.<errorMessage>
ThresholdEventsArchiver.Error730 Configuration file does not specify Archive Type, expected <text>,thresholdEventsArchive)
ThresholdEventsArchiver.Error730 Configuration file is for Archive Type <text>, expected <text>,<type>, thresholdEventsArchive)
ThresholdEventsArchiver.Error730 Initialisation failed, cannot perform Archive Run.
TimeSeriesArchiver.Error745 Configuration file does not specify Archive Type, expected <text>, timeSeriesArchive)
TimeSeriesArchiver.Error745 Configuration file is for Archive Type <text>, expected <text>, <type>, timeSeriesArchive)
TimeSeriesArchiver.Error745 Initialisation failed, cannot perform Archive Run.
TimeSeriesImport.Error775 <configFile> invalid, <message> configFile<errorMessage>
TimeSeriesImport.Error775 cannot transform the series, <message><errorMessage>
TimeSeriesImport.Error775 error adding import status <message><errorMessage>
UpdateExpiryTime.Failed805 Update of expiry time of forecast task(s) failed.)
UpdateExpiryTime.Failed805 Update of expiry time of forecast task(s) failed.)<errorMessage>
WaterCoach.Error2744 Unsupported database type dataSourceTypeName
WaterCoach.Error2744 localDataStore not found <path>
WhatIfScenarioDialog.Error828 <errorMessage>
WARN
<Custom.EventCode>2755 description
AI.KillError3310 Task <id> kill request failed for <user> <message>
AI.KillError3310 TaskRun <taskrunId> kill request failed for <userRequest> <message>
Amalgamate.Warn835 Synch level 0 is not allowed for external timeSeriesGroup
Amalgamate.Warn835 Synch level 1 is not allowed for simulated timeSeriesGroup
Application.Warn850 <pathWarningMessage>
ArchiveExport.Warn865 Taskrun is not availabe for archiving. Taskrun id = {0}, Fss id = {1}, archiveTaskRunId, fssId)
ArchiveExport.Warn865 Taskrun is not availabe for archiving. Taskrun id = {0}, Fss id = {1}, taskRunId, fssId)
Config.Warn880 Location set locationSetId does not exist.
Config.Warn880 Aggregation Accumulative Transformation not designed for non-equidistant input data, this may result in unexpected output values
Config.Warn880 Attribute <attributeDefId> not defined for output location <outputLocationId>
Config.Warn880 Closest distance speed optimizations DISABLED. Please configure a distance geo datum that uses meters applicable for the area (eg. UTM) for irregular lat/long grids/points in the closestDistance transformation config.
Config.Warn880 Cold states in obsolete external dir are ignored when available in config dir dir obsoleteExternalColdStatesDir
Config.Warn880 Cold states in obsolete external dir are overruling cold states in data store obsoleteExternalColdStatesDir
Config.Warn880 Configured url could not be loaded: this.loadedUrl
Config.Warn880 CustomFlagSources contains a duplicate flag unsignedFlag configFile
Config.Warn880 Do not overwrite time series with an other sync level than before ( synchLevel and previousSynchLevel <timeSeriesGroup>
Config.Warn880 Do not specify members or regular expression for ensemble main in time series set, <configFile>
Config.Warn880 Export attribute geoDatum is not supported for export type currentExportType the attribute is ignored and the default coordinate system will be used
Config.Warn880 File extension should be requiredFileExtension : entryName
Config.Warn880 File extension should be requiredFileExtension : relPath
Config.Warn880 Inverse distance speed optimizations DISABLED. Please configure a (UTM) distance geo datum for irregular lat/long grids/points in the inverseDistance transformation config., see http://publicwiki.deltares.nl/display/FEWSDOC/InterpolationSpatialInverseDistance
Config.Warn880 Location mapping listed twice in id map <filename> : internal: <id>, external: externalId configFile
Config.Warn880 Location mapping listed twice in id map <filename> : internal: internalLocationId, external: <external> configFile
Config.Warn880 Location with id locationId not part of creatorLocationSetId locationSetFile baseConfigFile dBaseFileReader
Config.Warn880 Mapping external id to internal id is ambiguous for PRTF: internalId <configFile>
Config.Warn880 Mapping external id to internal id is ambiguous for PTRF: externalId <configFile>
Config.Warn880 Mapping internal id to external id is ambiguous for PTRF: internalId <configFile>
Config.Warn880 Mapping listed twice: internal ids: internalId external ids externalId
Config.Warn880 Mapping listed twice: internal parameter: <internalParameter>, internal ensemble member: <internalEnsemble> ':' <internalEnsembleMemberIndex>, external parameter: <externalParameter>, external parameter qualifier: <externalParameterQualifier>, external location: <externalLocation> in id map, <configFile>
Config.Warn880 Module compact cache files should run daily on every FFS (including fssId ). Please schedule a workflow that includes this module on an every FSS
Config.Warn880 No qualifiers found for qualifier node <id> configFile
Config.Warn880 No timeseries found in report. Using system date to configure output filename of the report for the TIMESERIES_POSTFIX tag.
Config.Warn880 No timeseries found in report. Using system date to configure output filename of the report for the TIMEZERO tag.
Config.Warn880 No workflow found for id workflowId. See <configFile>
Config.Warn880 Number of time steps wasn't configured for the timeshift transformation.
Config.Warn880 Parameter <id> is configured with a cumulativeSum as externUnit, this is not available for time series of type <timeSeriesType>
Config.Warn880 Parameter mapping listed twice. internal: <internal>, ensemble member: <internalEnsemble> : <internalEnsembleMemberIndex>, external: <external>, external qualifier: <externalQualifier> , <configFile>
Config.Warn880 Parsing CSV boolean value failed. Tried to parse ' csvString ' of column ' columnName ' as a boolean value. Please specify 'true' or 'false' to parse this value as a boolean.
Config.Warn880 Parsing CSV date value failed. Tried to parse ' csvString ' of column ' columnName ' as a date value. Please specify a dateFormat or a long value to parse this value as a date or timestamp.
Config.Warn880 Parsing CSV double value failed. Tried to parse ' csvString ' of column ' columnName ' as a double value.
Config.Warn880 Parsing CSV numeric value failed. Tried to parse ' csvString ' of column ' columnName ' as an integer or long value.
Config.Warn880 Parsing CSV string value failed. Tried to parse ' csvString ' of column ' columnName ' as a string value, but the size of the value exceeds the maximum size of DEFAULT_COLUMN_LENGTH characters. The string will be truncated.
Config.Warn880 Please specify <url> <url> </url> instead of dbServerType/dbServerName/dbServerPort/dbInstanceName. These elements are obsolete since FEWS 2012.01, <configFile>
Config.Warn880 Please specify an absolute path instead of resolvedFileName
Config.Warn880 Polygon file <filename> <message> configFile<errorMessage>
Config.Warn880 Relative view period in time series set not allowed for import time series, please remove period from time series set timeSeriesSet configFile
Config.Warn880 Spatial homogeneity check speed optimizations DISABLED. Please configure a (UTM) distance geo datum for lat/long points in the spatial homogeneity check config
Config.Warn880 The current display period of the Schematic Status Display contains no time ticks. Adjust the TimeNavigatorRelativePeriod, OverrulingViewPeriod or SliderTimeStep to display at least one time tick.
Config.Warn880 The report export controller cannot find the requested image file to send to Telegram: photoFile
Config.Warn880 There are more than one forecasted timeSeriesSets configured in the FloodPeriodModule. Only the first set will be used
Config.Warn880 Thiessen will be extremely slow for lat long points. Please configure a (UTM) distance geo datum in the transformation
Config.Warn880 Threshold <thresholdId> will not be exported because not defined in idMap <configFile>
Config.Warn880 dBaseFileReader is listed more than once, read table once and filter with constraints locationSetFile
Config.Warn880 imported location from pairing table doesn't exist: ' locationId '
Config.Warn880 no external location id was found for location id <location>. Using internal id for export file.
Config.Warn880 no profile could be set for the selected timeSeriesSet. Only the following timestep types are supported: TimesOfDayTimeStep, IrregularTimeStep, DaysOfMonthTimeStep, SimpleEquidistantTimeStep
Config.Warn880 the rollingbarrel.maxlatetime property is smaller than rollingbarrel.time property. The rollingbarrel.maxlatetime will be set to the rollingbarrel.time 5 minutes.
Config.Warn880 timeOfValidityDefaultViewPeriod is required in the TimeSeriesDisplayConfig.xml when time of validity is enabled. A default relative view period of -1,1 days will be configured
Config.Warn880 timeOfValiditySearchPeriod is required in the TimeSeriesDisplayConfig.xml when time of validity is enabled. A default search period of -1, 0 days will be configured
Config.Warn880Can not synchronise cache file with original map layer file <name> specified in, <configFile>
ConfigExport.Warn895 Failed to export configuration {0} with version {1}. {2}),columnValue, selVersion, <message>)<errorMessage>
DataStore.Warn970 Grid geometry for location <locationId> is changed in RegionConfigFiles/Grids.xml, can not read old grid
DataStore.Warn970 Grid geometry for location <locationId> is no longer available in RegionConfigFiles/Grids.xml, can not read old grid
DataStore.Warn970 Profile geometry for location <locationId> is changed in RegionConfigFiles/Branches.xml, can not read old profile
DataStore.Warn970 Profile geometry for location <locationId> is no longer available in RegionConfigFiles/Branches.xml, can not read old profile
EAExport.Warn985 Error occurred during export: Validation against XML Schema: schemaFileName failed due to: <message>
EAImport.Warn1000 Backup folder does not exist: folderText
EAImport.Warn1000 Can not find validation schema schemaFileName
EAImport.Warn1000 Could not move file to backup folder: <message><errorMessage>
EAImport.Warn1000 Could not move file to failed folder: <message><errorMessage>
EAImport.Warn1000 EaImport.Warning: Error importing file filePath : <message><errorMessage>
EAImport.Warn1000 EaImport.Warning: Validation against XML Schema: schemaFileName failed due to: <message><errorMessage>
EAImport.Warn1000 Error during loading of StartTimeShift map: <message><errorMessage>
EAImport.Warn1000 Failed folder does not exist: folderText
EAImport.Warn1000 Import folder folderText does not exist, Cannot perform EA-import <moduleDescriptorName>
EAImport.Warn1000 Import folder missing
EAImport.Warn1000 message
ErrorModel.InvalidData1015 <message><errorMessage>
ErrorModel.InvalidData1015 Can not perform Boxcox transformation. Simulated data contains values smaller than or equal to zero.
FewsExplorer.Warn1105 Can not find fileName
ForcastArchiver.Warn2758 TaskRuns ArchiveDataType entry name is no longer taskruns, but <text> there will be problems importing old archives that do not contain <text>.,TASKRUNS, <filename>)
ForecastArchiver.VersionConflict2759 Archive Manifest not available; version conflicts are highly likely. Currently running: JRE version <text>, FEWS build <text>, Regional Configuration <text>),<java_version>, <version>, currentConfiguration)
ForecastArchiver.VersionConflict2759 DataStore error while checking version conflicts in build, configuration and JRE.,e
ForecastArchiver.warn2761 Error occurred while trying to examine Archive Manifest in: <text>, file will be skipped.,filename)<errorMessage>
ForecastingShell.Warn1135 <pathWarningMessage>
GA.Execution.Model.Warn2762 Over 10000 info messages were generated, caused by a badly written adapter
GA.Execution.Model.Warn2762 Too many errors, skipping upload of anymore errors to database
GA.Execution.Model.Warn2762 Too many warnings, skipping upload of anymore warnings to database
GA.Execution.Warn2763 Diagnostic file has not been specified
GA.Import.ProfileAndPolygon2764 Mapping to multiple time series not supported: fewsHeader
GA.Warn1150 Dump directory does not exist <path>
GA.Warn1150File will not exist on linux case sensitive file system. specified: specifiedPath file system: fileSystemPath
HymosTranserDbImport.Warn1165 <message><errorMessage>
Import.Warn1180 External time series can not be mapped to FEWS time series externalHeader
Import.Warn1180 Invalid directory: {0}), <directory>)
Import.Warn1180 Line contains an unexpected unit at line <lineNumber>, <fileUnit> will be used.
Import.Warn1180 Line contains less than 6 columns at line <lineNumber>
Import.Warn1180 Problems during import of <variablefullName> in file <netcdfDatasetLocation> because <validationWarnings>
Import.Warn1180 Problems during import of <variablefullName> in file <netcdfFileLocation> because <validationWarnings>
Import.Warn1180 error occurred when attempting to insert <configType> into table tableName. Check that the default table points to an existing configuration.<errorMessage>
Import.Warn1180 error occurred when attempting to insert configType into table tableName<errorMessage>
Import.Warn1180 import failed as file type childType incompatible with node parentNode
Import.Warn1180 import of file failed: <candidate> <errorMessage>
Import.Warn1180 message
Import.Warn1180 message <message><errorMessage>
Import.Warn1180 rejectedExternalSampleIds.length samples are rejected text
Import.Warn1180 resultString while retrieving data for locationId / parameterId - date: <time>
ImportAmalgamate.Warn1195 AMALGAMATE ORPHANS ENABLED. RE-AMALGAMATING COMPLETE DATABASE. This should only be executed once on a data store that not had an active amalgamate module running for a long time.
ImportArchive.ImportWarn1210 Unable to import <problemListSize> of the <size> records of data type: <className> due to an incomplete archive.
JdbcServer.Warn1225 <pathWarningMessage>
LocalDataStore.Warn1240 <message> , <configFile>
LocalDataStore.Warn1240 Cache cannot be read indexFile<errorMessage>
LocalDataStore.Warn1240 Dbf file is required when using attributes in tooltip, select by map item, dateTime or using class breaks fileName
LocalDataStore.Warn1240 File should start with configFilesCache cacheFile
LocalDataStore.Warn1240 Internal data store problem, blob reference counter is 0
MC_ALERTER_ALARM_MODULE.Warn-1 <message>
Manual.Warn1315 <modelMessage>
Manual.Warn1315 message
ModuleDataSetUpdater.Warn1330 Error reading info file <text>: <text>, <path>, <message>)
ModuleDataSetUpdater.Warn1330 No Entries found in data set moduleDataSetFile
RepairAndDefrag.Warn1345 line
ReportExport.DeleteFailed2765 deleting file or dir failed {0}, args)
SYSLOG.McSynchSuspended4049 <componentId> suspended until maintenance mode ended
SYSLOG.McSynchSuspended4049 componentId suspended until failover ended
SYSLOG.McSynchSuspended4049 componentId suspended until failover ended until switched on in the admin interface
TASKRUN.Failed.<text>2766 Task run <text> (WorkflowId '<text>') failed with exit code %d, workflowId, taskRunId, workflowId, returnCode)
TaskRun.LocalDataStoreSizeWarn1420 Local Datastore size at forecasting shell <partition> is nearing critical - current size is <endDataBaseSize> MB - Check if Rolling Barrel task is running properly
TaskRun.LocalDataStoreSizeWarn1420 Local Datastore size is nearing critical - current size is <endDataBaseSize> MB - Check if Rolling Barrel task is running properly
TaskRun.Warn1435 Forecast task <workflowId> with ID <taskRunId> cannot be approved, since task did not create any simulated time series, states and/or reports.
ThresholdEventsArchiver.Warn1450 No ThresholdEvent Archive Run configuration defined
ThresholdEventsArchiver.Warn1450 No ThresholdEvent Import or Export Archive Run configuration defined
TimeSeries.Changed1465 ModuleInstance= module, locationId= <locationId>, parameterId= <parameterId>, timeStep= timestep, period= changedPeriod, number of time steps changed <count>
TimeSeriesArchiver.EmptyList1480 No TimeSeries found that match the criteria for this archive run. No archive will be written.
TimeSeriesArchiver.Warn1495 Archive manifest data not set
TimeSeriesArchiver.Warn1495 No Archive Export Run configuration defined
TimeSeriesArchiver.Warn1495 No ModuleInstanceIds of TimeSeries to archive configured.
TimeSeriesArchiver.Warn1495 No TimeSeries Export or Import Archive Run configuration defined.
TimeSeriesImport.Warn1510 <message><errorMessage>
TimeSeriesImport.Warn1510 File virtualFileName has unknown format.
TimeSeriesImport.Warn1510 Invalid value-format in the line: line . Is the data format valid ?
TimeSeriesImport.Warn1510 The number of read cell-values ( cellCount ) does not correspond with the grid-size ( gridSize . Stop reading the file !
Transformation.Warn1525 Cannot find rating curve for location ' <location> ' and qualifierSet ' <qualifierSet> '.
WhatIfScenario.Warn1540 <errorMessage>
INFO
<Custom.EventCode>5 description
<MC_Component>.Started3987 Run <name> in <duration>
<MC_Component>.Stopped3988 Stopped <name> after <duration>
<newFloodPeriod.LogEventCode>2745New flood period created for area <periodAreaId> with start time <startTime>. <periodLocationInfo>
AI.ClearCache4047 MC clearCache initiated from the admin interface in mc mcId
AI.Failover3520 MC failover initiated from the admin interface. MCID: mcId
AI.MaintenanceMod4048 MC maintenanceMode deactivated from the admin interface in mc mcId
AI.MaintenanceMod4048 MC maintenanceMode initiated from the admin interface in mc mcId
AI.RestoreFailover3530 MC restore from failover initiated from the admin interface in mc mcId
AI.Shutdown3540 System shutdown initiated from the admin interface with shutdown call: buffer.toString()
AI.StartMcSynch4052 MC synch <remoteMcId> started
AI.StartMcSynch4052 MC synch could not be started <remoteMcId>, <message>
AI.Startup3550 System startup initiated from the admin interface: buffer.toString()
AI.StopMcSynch4051 MC synch <remoteMcId> stopped
AI.StopMcSynch4051 MC synch could not be stopped remoteMcId
AI.TaskCancel3560 Task: <taskId> cancelled by <userRequest>
AI.TaskEdit3991 Task: <taskId> edited by <userRequest>. Value before edit: <task> Value after edit: <task>
AI.TaskKill3992 Task <id> kill requested by <user>
AI.TaskKill3992 Task <taskrunId> kill requested by <userRequest>
AI.TaskResume3570 <message> by getLoggedInUser(theRequest)
AI.TaskResume3570 Task: <taskId> resumed by <userRequest>
AI.TaskSuspend3580 <message> by getLoggedInUser(theRequest)
AI.TaskSuspend3580 Task: <taskId> suspended by <userRequest>
AI.UserActivityAdd3590 System Activity for user: <user> added.
AI.UserAdd3600 User: <user> added.
AI.UserDel3610 <user> deleted.
AI.UserMod3620 User: <user> modified.
Amalgamate.Info1570 <amalgamatedActivities>, amalgamateBlobsRead rows ( <amalgamateReadDiskSpace> ) amalgamated to rowsText
Amalgamate.Info1570 Amalgamate valueType for run descriptor ( (i 1) / <systemActivityDescriptorsCount> ) with <length> rows ( <diskspaceBytes>, period, <duration>
Amalgamate.Info1570No import runs found to amalgamate
Application.Info1585 <fewsApplicationInfo>
Application.Startup357 Root config has been updated. Application will restart
Application.Startup.Finished2746 The application finished starting up.)
Application.Startup.Finished2746 The application finished starting up.) loadTimes(fewsExplorer)
Archive-Run.Info2747 No archive Run configuration defined
ArchiveImport.Started1645 Started importing archive file.
CPT.ConfigDetails2748 <text>
Config.CheckFinished1705 Check of configuration finished.)
Config.CheckStarted1720 Check of configuration started.)
Config.Info1735 Archive type not configured, assumed <text>, FORECAST)
Config.Info1735 Backup file backupFile used
Config.Info1735 Database AND backup file backupFile not available
Config.Info1735 New default file found: defaultFile
ConfigUpdate.Finished1750 for Task - taskRunDescriptor
ConfigUpdate.Info1765 No script files to import.
ConfigUpdate.Info1765 Start running configuration update scripts from directory <scriptDir>
ConfigUpdate.Started1780 for Task - taskRunDescriptor
CorrelationController.CorrelationFinished1825 Correlation finished
CorrelationController.CorrelationStarted1840 Correlation started for task - taskRunDescriptor and ModuleInstance moduleInstanceDescriptor
DataStore.NewCurrentRun1900 Task run arg is made current typeText
DecisionModule.Info1930 conditionRules = ' <conditionRules> '; transitionRules = ' <transitionRules> '
DecisionModule.Info1930 inputState = ' <inputStateValue> '; outputState = ' <outputStateValue> '
DecisionModule.NoStateChange1945 no stateChanges detected.
DecisionModule.StateChange1960 stateChange due to rule 'barrierId = <barrierId> ; decisionId = <id> '
EAExport.FileCount1975 Number of files in Export directory is <fileCount>
EventCrossingModule.Completed1990 Event crossing module completed
EventCrossingModule.Started2005 Event crossing module started
Export.Canceled2752 Failed to export configuration {0} with version {1}. {2}) no valid directory specified
Export.Finished2020 Export of configuration finished.) - exportDir - <configNode>
Export.Started2035 Export of configuration started.) - <configNode>
FewsModuleAdapterLauncherEventType.Info2050 <errorMessage>
ForecastLengthEstimator.Info2080 Established Forecast Length as forecastLength hours
ForecastLengthEstimator.Info2080 Last observation found at <lastValueTime>)
ForecastLengthEstimator.Info2080 Time0 set to <time>
ForecastLengthEstimator.Info2080 type state found at <stateTime>
ForecastingShell.Info2095 <fewsApplicationInfo>
ForecastingShell.Info2095 Local datastore <localDataStoreDir>
ForecastingShell.Info2095 Root config updated, FSS wil now restart <region>
ForecastingShell.Started2110 Forecasting shell started.
ForecastingShell.TaskInfo356 Database is in maintenance mode. Exit FSS
ForecastingShell.TaskInfo356 Received an MCProxy signal to terminate the forecasting shell after running <duration> s.
ForecastingShell.TaskInfo356 Terminating of FSS task by workflow timeout after running <duration> s.
Gui.Initialized2170 Configuration manager GUI initialized.)
Gui.Initialized2170 Graphical user interface initialized.)
HymosTransferDbImport.Started2185 for Task - taskRunDescriptor
Import.Info2210 External time series successfully mapped to FEWS time series externalHeader
Import.Info2210 acceptedTimeSeriesCount time series imported, rejectedTimeSeriesCount time series rejected
Import.Info2210 clearedSampleValuesCount existing sample values removed that are not available in the re-imported samples virtualFileName
Import.Info2210 message <elements>
Import.Started2215 Import of configuration started.)
JdbcServer.Info2230 <fewsApplicationInfo>
LocalDataStore.Info2245 Compacting index files finished
LocalDataStore.Info2245 Compacting index files started
Login.Finished2260Logged in to archive: archiveName
MC_ALERTER_ALARM_MODULE.Info3993 <message>
Manual.Info2320 <modelMessage>
Manual.Info2320 message
Manual.SystemInfo2335 <modelMessage>
ManualForecast.Started2350 Manual forecast <{0}> has been sent to the task scheduler)
ManualForecast.Started2350 infoText
MapCache.Info2365 Create new cache file for mapRemoteFile
ModuleDataSetUpdater.Info2751 Updating ModuleDataSet <text> <text>, <moduleDataSetFilename>, infoFile)
RdbmsExport.Info2380Export finished.
RdbmsExport.Info2380Exporting filters...
RdbmsExport.Info2380Exporting locations...
RdbmsExport.Info2380Exporting parameters...
RdbmsExport.Info2380Exporting timeseries and timeseriedata...
RdbmsExport.Info2380Start export
RepairAndDefrag.Info2395 Close synchronization connection
RepairAndDefrag.Info2395 Repair and defrag not required when using direct database access
RepairAndDefrag.Info2395 Repair and defrag only enabled on FSS. F12-> database > [repair and defrag local datastore] can be used instead
RepairAndDefrag.Info2395 Synchronization connection closed
RepairAndDefrag.Info2395 repair and defrag local data store completed, current size size MB
RepairAndDefrag.Info2395 repair and defrag local data store started
RerunForecast.Started2425 Rerun of forecast task <{0}> has been sent to the task scheduler)
SYSLOG.FSS357 ForecastingShellTaskRunner fssId for <mcId> successful since starting in <duration>
SYSLOG.FSS357 Stopping ForecastingShellTaskRunner fssId for mcId
SYSLOG.McSynchResumed4054 Resuming componentId after failover
SYSLOG.McSynchResumed4054 Resuming componentId after maintenance mode ended
SYSLOG.McSynchResumed4054 Resuming componentId after switched off
SYSLOG.RemoteMCFound4055 Remote mc remoteMcId
SYSLOG.RemoteMCOk4051 Remote mc <remoteMcId> due to failover
SYSLOG.RemoteMCOk4051 Remote mc <remoteMcId> no longer failed
SYSLOG.RollingBarrel4053 Slow detection of expired rows in table lastTableName in <duration>
SYSLOG.StartedVersion3755 <component>, <version <runtimeInformation>
SYSLOG.StoppedVersion3758<component> <duration>
TASKRUN.Complete.<text>2753 Task run <text> (WorkflowId '<text>') completed, workflowId, taskRunId, workflowId)
TASKRUN.Terminated.<text>2754 Task run <text> (WorkflowId '<text>') was marked as terminated, workflowId, taskRunId, workflowId)
TableStorage.Info2470 WhatIfScenario name <text> too long, truncated to <text>.,<name>, theName)
TimeSeriesIndex.ValidateAndCompactFinished2756 <duration> seconds, removed rows <removedRatio>, removed time series <timeSeriesCount> / oldTimeSeriesCount, removed groups removed(<pluralGroupCount>) / <oldPluralGroupCount>, removed ids removed(<idCount>) / <oldIdCount>, removed qualifier set ids <removedQualifierRatio>, removed id sequences <removedSequencesRatio>, released memory <indexMemUsage> / <oldIndexMemUsage>
Workflow.ActivityCompleted2545 Workflow <id> completed in <millis>
Workflow.ActivityStarted2560 Workflow id

 Event codes before 2017.02

Event codes before 2017.02

Important changes in 2015.01

Since 2015.01 debug messages are no longer logged into the database for performance reasons, several useful mc debug messages have been promoted to info level.

Most commonly used event codes

DataStore.NewCurrentRun (Datastore.NewCurrentRun in Delft-FEWS 2014.01 and older)

SYSMON:FSSLost

SYSMON:Restarting

TASKRUN:Complete.<workflowId>

Error Event codes for the Master-Controller

event_codeevent_iddescription
<mcCustomEventCode>2900Failure experienced processing action action. Message: <message>
<mcCustomEventCode>2900Failure experienced processing action eventAction. Message: <message>
EVENT_TASK_ACTIONER:InvalidTaskProperties2910Error creating new taskproperties Document for task with workflow id: <workflowId>
EVENT_TASK_ACTIONER:InvalidTaskProperties2910Error marshalling modified taskproperties for task with workflow id <workflowId> <message>
EVENT_TASK_ACTIONER:InvalidTaskProperties2910Error unmarshalling taskproperties for task with id: <taskId> (workflow id: <workflowId>) <message>
EVENT_TASK_ACTIONER:InvalidTaskProperties2910Error validating new taskproperties for task with workflow id: <workflowId> <message>
EVENT_TASK_ACTIONER:InvalidTaskProperties2910Error validating taskproperties for task with id: <taskId> (workflow id: <workflowId>) <message>
FSS:Launch2920Launching forecast shell process failed. Command: <commandLine> Working dir: <workDir>
FSS:Shutdown2930Error occurred while attempting to shutdown service: <message>
FSS:Shutdown2930FSS shutting down due to error. (TaskRunId ' <taskRunId> ', WorkflowId ' <workflowId> ' exited with return code: exitCode + convertedFromCode. Shutdown level set to: <level> )
FSSTASKRUN:Load2940Error pre-loading shell server: <message>
FSSTASKRUN:Starting2950Error obtaining MC system time. <message>
FSSTASKRUN:Starting2950FSS system time out of synch with MC time by approx. <systemTimeCheckerDiscrepancy> secs. This may result in synchronisation problems.
MARKED_RECORD_MANAGER:RequestFailed2960Task run <taskRunId> (WorkflowId ' <workflowId> '): execution failed: <message>
MCL:Starting2970Error obtaining MC system time. <message>
MCL:Starting2970FSS system time out of synch with MC time by approx. <systemTimeCheckerDiscrepancy> secs. This may result in synchronisation problems.
MCL:StatusMessagesFailed2980No status message was sent to the MasterController for <seconds> seconds. MCProxy will terminate, so it can restart itself cleanly.
MCSYNCH:RequestFailed2990Task run <taskRunId> (WorkflowId ' <workflowId> '): execution failed: <message>
MC_ALERTER_ALARM_MODULE.Error3000Only alarmDiagTemplateLine defined in task properties and no alarmDiagLines, will not process alert: properties
MSG:Exception3010Exception message: <message>
MSG:RequestFailed3020Message handling failed: <message>
ROLLBARREL:RequestFailed3030Task run <taskRunId> (WorkflowId ' <workflowId> '): execution failed: <message>
SYSMON:DigestRequestFailed3040System status digest writing failed: <message>
SYSMON:DigestSkipped3050Digest entry due at <digestDueTime> skipped as too late to be meaningful
SYSMON:FSSLost3060Failed to monitor FSS: fssId
SYSMON:FSSRequestFailed3070Monitoring of FSS fssId failed: <message>
SYSMON:LiveWriteRequestFailed3080Live status writing failed: <message>
SYSMON:MCFailed3090Component <className> appears to have failed repeatedly. The MC has been marked failed until it recovers.
SYSMON:MonitorRequestFailed3100Monitoring iteration failed: <message>
SYSMON:RemoteJMSFail3110Failed to monitor remote MC: mcId
SYSMON:RemoteMCFailed3120Remote MC reports that it is failed: mcId
SYSMON:RemoteMCFailed3120Remote MC: remoteMcId reports that it is failed.
SYSMON:RemoteMCLost3130Failed to connect to remote MC: remoteMcId
SYSMON:RemoteMCLost3130Failed to monitor remote MC: mcId
SYSMON:RemoteMCRequestFailed3140Monitoring of remote MC mcId failed: <message>
SYSMON:RestartAborted3150Couldn't (re-)start <className> ; aborting and retrying
SYSMON:RestartFailed3160<message>
SYSMON:RestartRequestFailed3170Restarting processes failed: <message>
SYSMON:Starting3180System monitor time out of synch with Database server time by approx. <discrepancy> secs. This may result in synchronisation problems.
SYSMON:StartupProblem3190Failed to remove live status data from the database.
SYSMON:VersionFailed3200Failed to stamp MC software version into the database.
SYSRPT:RequestFailed3210Task run <taskRunId> (WorkflowId ' <workflowId> '): execution failed: <message>
SYSTEM_EMAILER:RequestFailed3220Task run <taskRunId> (WorkflowId ' <workflowId> '): execution failed: <message>
TASKRUN:Failed.<workflowId>3230Could not reset task <taskRunId>. The task run will not be rescheduled. <reason>
TASKRUN:Failed.<workflowId>3230Could not reset task for task run <taskRunId>. The task run will not be rescheduled. <reason>
TM:ChaserCaught3240Task run <taskRunId> (WorkflowId ' <workflowId> ') didn't complete in time
TM:ChaserRequestFailed3250Task Chasing failed: <message>
TM:LauncherMissed3260Couldn't launch <taskRunId> (TaskId: <taskId> ; WorkflowId: <workflowId> ): No FSS mapping exists for this workflow. Please correct this.
TM:LauncherMissed3260Couldn't launch <taskRunId> (TaskId: <taskId> ; WorkflowId: <workflowId> ): task run missed as no suitable FSS became live (due time: <dueTime> by amountOverdue
TM:LauncherMissed3260Did not launch MC taskrun <taskRunId> (TaskId: <taskId> ; WorkflowId: <workflowId> ): task run is overdue (due time: <dueTime> by amountOverdue
TM:LauncherRequestFailed3270Task Launching failed: <message>
TM:TaskInvalid3280Task entry: <taskId> was invalid and cannot be launched. It has been marked dead.
UpdateExpiry.Error3290Cannot update expiry time of WhatIfScenario with whatIfId <whatIfId> as it is still associated with active Task(s): { <tasks> }
UpdateExpiry.Error3290Unknown timeSeriesType <timeSeriesType> for creatorTaskRunId taskRunId. TimeSeries records will not be updated.
UpdateExpiry.InvalidRecord3300No WhatIfId specified in RecordsPendingUpdateExpiry record with pendingUpdateExpiryId= <pendingUpdateExpiryId>
UpdateExpiry.InvalidRecord3300No taskId specified in RecordsPendingUpdateExpiry record with pendingUpdateExpiryId= <pendingUpdateExpiryId> and unable to retrieve taskId for taskRunId= trId. Forecast expiry time will not be updated.
UpdateExpiry.InvalidRecord3300No taskRunId specified in RecordsPendingUpdateExpiry record with pendingUpdateExpiryId= <pendingUpdateExpiryId>

Warn Event codes for the Master-Controller

event_codeevent_iddescription
AI:KillError3310<message>
EV_PROC:NoActioner3320No actioner available for actionType
EV_PROC:UnknownId3330Unable to process unknown eventCode: entryEventCode
FSSTASKRUN:LogFile3340Failed to move output file: <filename>
FSSTASKRUN:Terminated3350TaskRunId: <taskRunId> was terminated
LOG_COLLECTOR_SERVICE:Failed3360Failed to start logCollectorService
MCL:Starting3370Error while determining path of './auth.conf' file: <message>
MCSYNCH:RemoteUnavail3380Could not connect to remote MC: remoteMcId. JMS connection failed.
MCSYNCH:RemoteUnavail3380Remote MCID: remoteMcId is not available for MC<->MC Synchronisation
MSG:Invalid3390Invalid message: <message>
RECORD_DELETION:MarkRecordFailed3400<message>
RECORD_DELETION:RemoveRecordFailed3410MarkedRecordsRemover. Unable to remove record as primary key information cannot be retrieved from the database
RECORD_DELETION:RemoveRecordFailed3410MarkedRecordsRemover. Unable to remove records from tableName
RECORD_DELETION:RemoveRecordFailed3410MarkedRecordsRemover. Unable to remove records from tableName. Database definition may be incorrect or incomplete. Exception: <message>
ROLLBARREL:NoTables3420Rolling barrel task initiated with no tables specified. No database cleaning can be performed.
ROLLBARREL:QuickPurge3430Error during quick purge of databaseTable table with statement sqlDelete and parameter <params>: <message>
ROLLBARREL:Removal3440Cleanup ModuleInstanceRuns: deleting records with non-existing TaskRunId...
ROLLBARREL:Removal3440Cleanup ModuleInstanceRuns: done.
ROLLBARREL:RemoveRecordFailed3450<tableName>. Unable to remove record for query sql with params <params> for recordType records for table: <tableName>
TASKRUN:Failed.<workflowId>3455Task run <taskRunId> (WorkflowId ' workflowId ') failed with exit code <exitCode>
TASKRUN:Invalid3460Task run <taskRunId> (WorkflowId ' <workflowId> ') was not run as its properties were invalid
TASKRUN:LaunchFailed3470Launch of Task run <taskRunId> (WorkflowId ' <workflowId> ') failed.
TASKRUN:NoReRun3480Task <taskId> will not be rescheduled due to workflow mapping type: <workflowFssId>. <reason>
TASKRUN:ReRun3490Task <taskId> has been reset, the task run will be rescheduled. <reason>
TASKRUN:Terminated.<workflowId>3500Synch task run taskRunID (WorkflowId workflowId ) was found marked Running at start of Synchronisation process.
UpdateExpiry.InvalidRecord3510No taskId specified in RecordsPendingUpdateExpiry record with pendingUpdateExpiryId= <pendingUpdateExpiryId> using taskId found in database: tskId

Info Event codes for the Master-Controller

event_codeevent_iddescription
AI:Failover3520MC failover initiated from the admin interface. MCID: <mcId>
AI:RestoreFailover3530MC restore from failover initiated from the admin interface. MCID: <mcId>
AI:Shutdown3540Arguments: <args>
AI:Shutdown3540System shutdown initiated from the admin interface with shutdown call:
AI:Startup3550Arguments: <args>
AI:Startup3550System startup initiated from the admin interface.
AI:TaskCancel3560Task: <taskId> cancelled
AI:TaskResume3570<logText>
AI:TaskResume3570Task: <taskId> resumed
AI:TaskSuspend3580<logText>
AI:TaskSuspend3580Task: <taskId> suspended
AI:UserActivityAdd3590System Activity for user: <username> added.
AI:UserAdd3600User: <userId> added.
AI:UserDel3610User: <userId> deleted.
AI:UserMod3620User: <userId> modified.
AllTaskRunsCompleted.<workflowId>3630All TaskRuns of split ensemble run of Task with taskId taskId (WorkflowId ' workflowId ') completed successfully. Last TaskRun to complete successfully: taskRunId
AllTaskRunsDoneWithErrors.<workflowId>3640All TaskRuns of split ensemble run of Task with taskId taskId (WorkflowId ' workflowId ') finished; one or more TaskRuns failed. Last TaskRun to complete: taskRunId
EVENT_TASK_ACTIONER:NoTasks3660Event: eventCode processed. No tasks found matching tag <taskTag>
EVENT_TASK_ACTIONER:OldTaskProperties3670Old task properties found for task id <taskId> (workflow id <workflowId>), please (re-)schedule with an xml adhering to the full taskProperties.xsd schema. Support for old task properties can disappear in future releases.
FSS:Shutdown3680FSS return code (143) above shutdown level( <level> ), but ignoring this, because it is generated by the Java VM after catching a Windows logoff event. (Java exiting, because the user logs off under MS Windows).
FSSTASKRUN:LogFile3690Log file: <filename> has become too large and will be moved to: <filename>
LOG_COLLECTOR_SERVICE:Check3700tryWebService is still alive
LOG_COLLECTOR_SERVICE:Started3710Started logCollectorService on currentWebService
MCL:Terminating3720Terminating MCProxy.
MCSYNCH:StandAlone3730Stand-alone MC-MC Synchronisation finished.
MCSYNCH:StandAlone3730Stand-alone MC-MC Synchronisation started.
ROLLBARREL:Removal3740RollingBarrel deleted <amount> <idMapping> for <pkLength> <tableName> in <seconds> s
ROLLBARREL:Removal3740RollingBarrel tidied <amount> <tableName> for <pkLength> <parentTableName> in <seconds> s
ROLLBARREL:Removal3740Stand-alone McRollingBarrel finished.
ROLLBARREL:Removal3740Stand-alone McRollingBarrel started.
SMTPAlertHandler.MessageSent3750<logText>
SYSLOG:StartedVersion3755<mcversion> <loggingComponent>
SYSLOG:StoppedVersion3759<loggingComponent> <duration>
SYSMON:FSSFound3760Re-established connection with FSS: fssId
SYSMON:MCOK3770MC marked healthy, all MC components have returned to a healthy status.
SYSMON:RemoteMCFound3780Re-established connection with remote MC: mcId
SYSMON:RemoteMCOK3790Remote MC: mcId reports that it is OK.
SYSMON:RemoteMCOK3790Remote MC: remoteMcId reports that it is OK.
TASKRUN:Complete.<workflowId>3800Task run <taskRunId> (WorkflowId ' workflowId ') completed.
TASKRUN:Terminated.<workflowId>3810Task run <taskRunId> (WorkflowId ' workflowId ') was marked as terminated
TM:LauncherFoundPendingRuns3820Found older pending taskRuns for workFlow ' <workflowId> ', terminating these before launching new TaskRun with taskRunId <taskRunId>
TM:LauncherSkipped3830TaskRun <taskRunId> (WorkflowId: <workflowId> ) not yet due to launch, will run later
TM:LauncherStarted3840Picked up <pendingTaskRuns> pending task runs.

Debug Event codes for the Master-Controller

event_codeevent_iddescription
<mcCustomEventCode>2900The following <relatedLogsSize> log entries were processed successfully for event code: eventCodelogDetails
CPT:ConfigDetails3850<details>
FSSTASKRUN:Complete3860TaskRunId: <taskRunId> (WorkflowId: <workflowId> ) has completed with exit code: exitCode + convertedFromCode
FSSTASKRUN:Exec3870After writing TaskRunId
FSSTASKRUN:Exec3870TaskRunId: <taskRunId> started. Running workflow <workflowId>
FSSTASKRUN:Exec3870Writing TaskRunId to loaded shellServer: <taskRunId>
FSSTASKRUN:Load3880Pre-loading shell server
FSSTASKRUN:Loading3890Loading shell server with taskRunId <taskRunId>
FSSTASKRUN:Loading3890Restarting pre-loaded shell server due to new root config.
FSSTASKRUN:LogFile3900After waiting
FSSTASKRUN:LogFile3900After writing output stream
FSSTASKRUN:LogFile3900Before writing output stream
FSSTASKRUN:Shutdown3910Error killing task with id: key
FSSTASKRUN:Starting3920FSS time before MC time call : <systemTimeCheckerTimeBefore> MC time : <replyTime> FSS time after MC time call : <systemTimeCheckerTimeAfter>
LOG_COLLECTOR_SERVICE:Check3930Found file MCLogCollectorService.upFile. Will see if tryWebService is still alive
LOG_COLLECTOR_SERVICE:Check3930tryWebService is up but IDs differ id != serviceId
LOG_COLLECTOR_SERVICE:Down3940tryWebService appears to be down
LOG_COLLECTOR_SERVICE:Down3940tryWebService appears to be malformed
LOG_COLLECTOR_SERVICE:Starting3950Starting new logCollectorService
MCL:Starting3960FSS time (before MC time call) : <systemTimeCheckerTimeBefore> MC time : <replyTime> FSS time (after MC time call) : <systemTimeCheckerTimeAfter>
MCL:Starting3960MC and <fssId> system times are in synch - <replyTime>
MC_ALERTER_ALARM_MODULE.Debug3970Sent AlarmRequest to AlarmModule webservice URL webserviceURL
ROLLBARREL:Removal3980<tableName>. Table: <tableName>, removing count recordType records.
ROLLBARREL:Removal3980Quick purge. Table: databaseTable, removed recordCount records.
ROLLBARREL:Removal3980Table tidier. Table: <tableName>, removed numberRemoved records.
ROLLBARREL:Removal3980Update of finished Tasks with NULL expiry time: set expiry time of updateCount record(s).
ROLLBARREL:SetExpire3990Rolling barrel. Table: <tableName>, Setting expire time to expireTime on records with null expire time.
SYNCHTASKRUN:Complete4000Completed data management task with exit code <exitCode>
SYNCHTASKRUN:Exec4010Running data management task. WorkflowId= <workflowId>
SYSRPTTASKRUN:Complete4020Completed system reporting task with exit code <exitCode>
SYSRPTTASKRUN:Exec4030Running system reporting task. WorkflowId= <workflowId>
TM:TaskWebserviceTaskRunFinished4040TaskRun <taskRunId> for TaskWebService Task <taskId> finished with status <status>
UpdateExpiry.Debug4050Finished update of expiry times for WhatIfScenario with whatIfId <whatIfId>
UpdateExpiry.Debug4050Finished update of expiry times for forecast with taskRunId <taskRunId>
UpdateExpiry.Debug4050Finished update of expiry times for modifier with taskRunId <taskRunId> and modifierId <modifierId>
UpdateExpiry.Debug4050Started update of expiry times for WhatIfScenario with whatIfId <whatIfId>
UpdateExpiry.Debug4050Started update of expiry times for forecast with taskRunId <taskRunId>
UpdateExpiry.Debug4050Started update of expiry times for modifier with taskRunId <taskRunId> and modifierId <modifierId>
UpdateExpiry.Info4060Found associated Task with an expiry time after the requested WhatIfScenario expiry time, using that expiryTime instead.

Fatal Event codes for the Operator Client / Forecasting Shell

event_codeevent_iddescription
Config.Error10AR coefficients must be successive list starting with Order 1!
Config.Error10Can not create AnalysisWindow for error model calculations!
Config.Error10MA coefficients must be successive list starting with Order 1!

Error Event codes for the Operator Client / Forecasting Shell

event_codeevent_iddescription
Amalgamate.Error100Amalgamate increased the number of rows or disk space: amalgamateBlobsRead rows ( <amalgamateReadDiskSpace> ) amalgamated to <rows> rows ( <writtenDiskSpace> )
ArchiveImport.Error115Error importing archive file: file : <message>
ArchiveImport.Error115not supported ArchiveDataType ( customId ) present in the manifest file for CustomArchive
ArchiveRun.Failed130archive import directory does not exist importDirectory
ArchiveTaskPage.Error145Could not load ArchiveQueryService: <serviceUrl>
ChartLayer.Error160error while running chart layer <message>
Config.Error1<ignoreCommentPattern> is not a valid regular expression
Config.Error1<message>
Config.Error1<message> + plotText configFile
Config.Error1<message> <locationSetId>
Config.Error1<message> configFile
Config.Error1<message> displayConfigFile
Config.Error1<message> for location set <locationSetId> csvFile locationSetsConfigFile
Config.Error1<message> for location set <locationSetId> dbaseFile locationSetsConfigFile
Config.Error1<message> for modifier id
Config.Error1<message> in time series for modifier id configFile
Config.Error1<message> locationSetFile
Config.Error1<message> locationSetsConfigFile
Config.Error1<variableTransformationName>. A DuoSpecificationVariable, UserDefinedFunctionVariable or TypicalProfileVariable must be specified
Config.Error1@#$ are not allowed in location id <id> configFile
Config.Error1@#$ are not allowed in qualifier id <id> configFile
Config.Error1@#$~ are not allowed in parameter id <id> configFile
Config.Error1A module instance that is referenced as simulated historical by another module instance is not allowed to reference a simulated historical module instance by it self: module instance <moduleInstanceDescriptorId> in group <groupId> <configFile>
Config.Error1AddLocationCommand type command expected. Found: <commandClassName>
Config.Error1All parameters belonging to the same group should share the same display unit <displayUnit> displayUnit id parametersConfigFile dBaseFileReader
Config.Error1All parameters belonging to the same group should share the same parameter type <parameterType> parameterType id parametersConfigFile dBaseFileReader
Config.Error1All parameters belonging to the same group should share the same unit <groupUnit> unit id parametersConfigFile dBaseFileReader
Config.Error1All referenced simulated historicals from one group should belong to the same group group:moduleInstanceDescriptor <configFile>
Config.Error1All time series sets for grid map layers should have a relative view period or read complete forecast res configFile
Config.Error1All time series sets for grid map layers should have a single explicit ensemble member res configFile
Config.Error1All time series should share the same time step when aggregation time spans configured displayConfigFile
Config.Error1Archive task type not supported for this module: archiveTaskType
Config.Error1Attribute <attributeId> already defined somewhere else as attribute of other type <source> configFile
Config.Error1Attribute <attributeId> is listed twice <source> configFile
Config.Error1Attribute attributeId for <expression> already defined in other parameter or location set as attribute of other type configFile
Config.Error1Branch id should equal an existing location id <branchId> configFile
Config.Error1Can not configure both AR coefficients and AnalysisWindow!
Config.Error1Can not create create class breaks id <message> configFile
Config.Error1Can not detect root element ratingCurveFile
Config.Error1Can not find <shapeFile> configFile
Config.Error1Can not find csvFile
Config.Error1Can not find dbase column columnName in <expression> dBaseFileReader configFile
Config.Error1Can not find dbf for resource configFile
Config.Error1Can not find dbfFile locationSetFile
Config.Error1Can not find fileNameWithoutExt.dbf
Config.Error1Can not find flag conversion descriptor id
Config.Error1Can not find gis connection <connectionId> configFile
Config.Error1Can not find help file specified in explorer <configFile>
Config.Error1Can not find location <locationId> in displayConfigFile
Config.Error1Can not find location column/attribute idAttributeName in dbf file dbfFile configFile
Config.Error1Can not find name
Config.Error1Can not find parameter id defined in extern units
Config.Error1Can not find parameter id defined in external units
Config.Error1Can not find parameter id defined in interpolate series
Config.Error1Can not find pathWithoutExt.prj configFile
Config.Error1Can not find shpFile locationSetFile
Config.Error1Can not find time series button panel panelId referenced in topology node <segmentNodeId>
Config.Error1Can not find warning icon for level <maxWarningLevel>
Config.Error1Can not find wms connection <connectionId> define connections before the layers in the map xml configFile
Config.Error1Can not id map descriptor id
Config.Error1Can not parse date time text for <expression> in dbf file for location with id ' locationId ' for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1Can not parse date time text using pattern <dateFormatPattern> for <expression> in file at row (<row>) for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1Can not parse expression as value for <expression> configFile dBaseFileReader
Config.Error1Can not parse function expression in <expression> configFile
Config.Error1Can not parse text for attribute attributeId for <expression> configFile
Config.Error1Can not purge directory <dir> because it is not a sub directory of the GA root dir <dir>
Config.Error1Can not read external locations table locationsTable
Config.Error1Can not unit conversion descriptor id
Config.Error1Can't find icon file name referencingConfigFile
Config.Error1Cannot use irregular timeNavigatorTimeStep for time navigator in ScadaDisplay Config
Config.Error1Circular reference for nested location sets : parentChildTree configFile
Config.Error1Cold file name format should be name + <optional> space + version </optional> + <optional> space + default </optional> entryName
Config.Error1Cold file name format should be name + <optional> space + version </optional> + <optional> space + default </optional> file
Config.Error1Cold state file name format should be moduleInstanceId + space + groupId + <optional> space + version </optional>.zip entryName
Config.Error1Cold state file name format should be moduleInstanceId + space + groupId + <optional> space + version </optional>.zip file
Config.Error1Config cache corrupt configFile <message>
Config.Error1Configure a (grid) geometry for <locationId> in grids.xml, parser has not supplied a georeferenced (grid) geometry. Parameter <parameterId> will be skipped
Config.Error1Configure a (grid) geometry for <locationId> in grids.xml, parser has not supplied a regular geometry with parameterless geo datum. Parameter <parameterId> will be skipped xml
Config.Error1Configure a branch for <locationId> in branches.xml Parameter <parameterId> will be skipped
Config.Error1Configured default spectrum domain parameter id not found defaultSpectrumDomainParameterId configFile
Config.Error1Configured simulated historical module instance simulatedHistoricalModuleInstanceId for module instance id not found configFile
Config.Error1Configured simulated historical parameter simulatedHistoricalParameterId for parameter id configFile
Config.Error1Constraint error in filter with id <id> <message> configFile
Config.Error1Could not find parameter parameterId configFile
Config.Error1Could not find qualifier qualifierId configFile
Config.Error1Default synch level 0 is not allowed for external timeSeriesSet
Config.Error1Default synch level 1 is not allowed for simulated timeSeriesSet
Config.Error1Display node <name> <message> configFile
Config.Error1Do not configure an expiry time for temporary time series parameter
Config.Error1Do not specify a jdbc bin dir for driverClassName this driver is always loaded from the fews bin dir
Config.Error1Do not specify the obsolete ensembleMemberCount when ensemble configured in the workflow configFile
Config.Error1Do not use inner elements for attribute attributeId for <expression> configFile
Config.Error1Do not use inner elements for related location relationId for location locationId configFile
Config.Error1Do not use multiple value attribute in location constraint constraint for attribute attributeDef for location <locationId> in location set nestedLocationSetId in LocationSet locationSetId Multiple value attributes are created by attribute files that contains duplicate location ids <attributeDef> configFile
Config.Error1Domain parameter not configured configFile
Config.Error1Domain parameter parameter mapped to multiple external parameter ids <parLocationEnsembleIds> in <configFile>
Config.Error1Domain parameter with id domainParameterId does not exist configFile
Config.Error1Don't configure the unit conversions at the parameter groups level when already defined at the parameter level configFile
Config.Error1Dump file included in dump source directory list dumpDir dumpFileDir configFile
Config.Error1Duplicate attribute attributeId for <expression> configFile
Config.Error1Duplicate bookmark title in help file
Config.Error1Duplicate branch for <branchId> configFile <configFile>
Config.Error1Duplicate class breaks id <id> configFile
Config.Error1Duplicate custom color found in colorScheme xml. element name: customColorName
Config.Error1Duplicate custom color found in customColor xml. element name: <key>
Config.Error1Duplicate enumeration value code for id sampleMetadataSchemaFile dBaseFileReader
Config.Error1Duplicate files in directory structure ignore: file use: existing
Config.Error1Duplicate filter id <filterId> configFile
Config.Error1Duplicate group id groupId configFile
Config.Error1Duplicate location relation relationId for location locationId configFile
Config.Error1Duplicate locationSet id <locationSetId> file <object0>
Config.Error1Duplicate module instance id found <moduleInstanceDescriptorId> configFile
Config.Error1Duplicate moduleInstance id moduleInstanceDescriptorId in ModuleInstanceSet name configFile
Config.Error1Duplicate parameter id <id> parametersConfigFile dBaseFileReader
Config.Error1Duplicate property id sampleMetadataSchemaFile dBaseFileReader
Config.Error1Duplicate qualifier id <id> qualifiersConfigFile dBaseFileReader
Config.Error1Duplicate shape id shapedId detected in column idAttributeName at row <row> dbfFile configFile
Config.Error1Duplicated ThresholdValueSet id found: <setId> configFile existing
Config.Error1End time <endTime> before start time <startTime> for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1End time <endTime> before start time <startTime> for location with id ' locationId ' for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1End time <endTime> equals start time (end time is excluding) <startTime> for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1End time <endTime> equals start time (end time is excluding) <startTime> for location with id ' locationId ' for location set creatorLocationSetId dBaseFileReader locationSetFile
Config.Error1End time <startTime> is listed twice for different start time and same location locationId dBaseFileReader
Config.Error1Enumeration file missing <csvFile> configFile
Config.Error1Error in time series sets with id <timeSeriesSetsId> <message> configFile
Config.Error1Every multi threaded ensemble loop iteration should use different output time series Time series group is written by loop iteration ensembleLoopMember and existing
Config.Error1Export type currentExportType is not supported !
Config.Error1Failed importing ratingCurveFile
Config.Error1Failed parsing <message> csvFile configFile
Config.Error1Failed parsing historicalEventFile <message>
Config.Error1Failed to apply colorScheme: <message>
Config.Error1Failed to find color: <color> <message>
Config.Error1Failed to read colorSchemes config: <message>
Config.Error1Failed to read customColors config: <message>
Config.Error1File name name is too long to store in database. Reduce file name to 64 characters
Config.Error1Filter ID <filterId> : sub-filter id <id> does not exist ! <filterConfigFile>
Config.Error1Filter ID id : child filter id foreignKey occurs more that once! configFile
Config.Error1Filter id <filterId> not in Region Configuration
Config.Error1Filtering of workflows is only allowed for local runs. Remove the module instance ids for node <nodeId> configFile
Config.Error1For singleLocationDisplays it is required to specify a location set <name> configFile
Config.Error1For singleParentLocationDisplays it is required to specify a location set <name>
Config.Error1Global property hideExternalHistoricalAfterSystemTime is not supported, this behaviour is controlled by the water coach since 2013.02
Config.Error1Global property mapLayersCacheDir, required for gis connections configFile
Config.Error1Global property mapLayersCacheDir, required for wms connections configFile
Config.Error1HistoricalErrorResampler transformation, not all timeSeries have the same timeStep
Config.Error1If a run period is defined in the transformation, it is not allowed to configure a relative view period in the timeseriesset!. Using run period
Config.Error1Invalid character in ensemble id ensembleId reader
Config.Error1Invalid comment <comment>
Config.Error1Invalid configuration for ScadaDisplay ' configFile '. Multiple scadaPanels defined with id ' newScadaPanelId '. Please change ScadaDisplay configuration so that each scadaPanel has a unique id
Config.Error1Invalid date time pattern dateTimePattern configFile
Config.Error1Invalid expression expression in <expression> dBaseFileReader configFile
Config.Error1Invalid file name, double spaces are not allowed: entryName
Config.Error1Invalid file name, double spaces are not allowed: relPath
Config.Error1Invalid file name, name is empty: entryName
Config.Error1Invalid file name, name is empty: relPath
Config.Error1Invalid file name, name should not start or ends with a space: entryName
Config.Error1Invalid file name, name should not start or ends with a space: relPath
Config.Error1Invalid file name, spaces are only allowed to separate the version number and default tag: entryName
Config.Error1Invalid file name, spaces are only allowed to separate the version number and default tag: relPath
Config.Error1Invalid group id groupId configFile
Config.Error1Invalid moduleInstanceId id configFile
Config.Error1Invalid pattern in reader
Config.Error1Invalid time zone for <locationSetId> locationSetsConfigFile
Config.Error1Invalid timeNavigatorTimeStep configured in ScadaDisplay Config
Config.Error1It is not allowed to specify a simulated historical parameter in another parameter group; simulatedHistoricalParameterId from id configFile
Config.Error1Level-threshold ID <levelThresholdId> occurs more that once in the file Thresholds ! configFile
Config.Error1List one rule without location id or a rule for every location in the specified time series sets for the validation rule set validationRuleSetId configFile
Config.Error1Location Id locationId in LocationSet locationSetId does not exist configFile
Config.Error1Location Id locationId in LocationSet locationSetId is listed twice configFile
Config.Error1Location Set Id nestedLocationSetId in LocationSet locationSetId does not exist configFile
Config.Error1Location Set Id nestedLocationSetId in LocationSet locationSetId is listed twice configFile
Config.Error1Location constraint error in display <name> <message> configFile
Config.Error1Location description <locationDescription> for locationId can not vary over time. dBaseFileReader
Config.Error1Location id <locationId> does not exist configFile
Config.Error1Location locationId specified for validationRuleName in validation rule set validationRuleSetId is listed twice configFile
Config.Error1Location locationId specified for validationRuleName in validation rule set validationRuleSetId not available in any time series set for validation rule configFile
Config.Error1Location name <name> for locationId can not vary over time. dBaseFileReader
Config.Error1Location relation <locationRelationId> specified in constraints in sourceId is unknown configFile
Config.Error1Location relation <locationRelationId> specified in constraints in sourceId only allowed for locations configFile
Config.Error1Location set is empty locationSetId configFile
Config.Error1Location set with id locationSetId does not exist configFile
Config.Error1Location short name <shortName> for locationId can not vary over time. dBaseFileReader
Config.Error1Location with id locationId does not exist configFile
Config.Error1Location with id locationId listed twice in dBaseFileReader
Config.Error1LocationSet id <locationSetId> <message> configFile
Config.Error1Module id does not exist: moduleId configFile
Config.Error1Module instance set with id moduleInstanceSetId does not exist configFile
Config.Error1Module instance with id moduleInstanceId does not exist configFile
Config.Error1ModuleInstance id <moduleInstanceId> not in Region Configuration
Config.Error1ModuleInstanceDescriptor Id moduleInstanceDescriptorId in ModuleInstanceSet name does not exist configFile
Config.Error1ModuleInstanceSet id is empty configFile
Config.Error1Multiple dependencies found oldId and idMapId
Config.Error1Multiple shape types found for <connectionFactory>_layerName : Configure shape type to filter for <foundShapeTypes>
Config.Error1Multiple threshold warning levels defined with id ' id '. Please change threshold warning levels configuration so that each threshold warning level has a unique id. configFile
Config.Error1Multiple values per attribute not allowed for validation rules validationRuleSetId limitsName location function configFile
Config.Error1Negative synch level res is not allowed for time series set parameter
Config.Error1No Id mapping found for domain parameter parameter in <parLocationEnsembleIds> in <configFile>
Config.Error1No configuration available
Config.Error1No coordinate configured for location
Config.Error1No unit conversion found for <parameterGroupUnit> to <classBreaksUnit> or vice versa
Config.Error1Node properties are only allowed for local runs. Remove the properties for node <nodeId> configFile
Config.Error1Non equidistant time step not allowed when aggregation time spans configured displayConfigFile
Config.Error1Not a valid path name file configFile <message>
Config.Error1Not all buttonSetting elements are set in timeSeriesDisplayOptions
Config.Error1Not allowed to specify multiple grids for one location locationId <configFile>
Config.Error1Number of cols/rows ( <cols>,<rows> ) parsed is not the same as configured for location <locationId> ( <cols>,<rows> ) in grids.xml. Parameter <parameterId> will be skipped
Config.Error1Number of points ( <size> ) parsed is not the same as configured for location <locationId> ( <size> ) in configFile. Parameter <parameterId> will be skipped
Config.Error1Number of shapes ( <shapeSize> ) should be the same as the number of rows ( <rows> ) in <inputFile>.shp
Config.Error1Only 9 is allowed as synch level for temporary time series set parameter
Config.Error1Only line and polygon shape files are supported in this context shapeFileReader
Config.Error1Only one polygon per location can be specified. Location id <locationId> is specified twice configFile
Config.Error1Parameter csv file missing <csvFile> configFile
Config.Error1Parameter with id parameterId does not exist configFile
Config.Error1ParameterId parameterId can only be defined once. configFile
Config.Error1Parent attribute parentId not found configFile <qualifierUrl>
Config.Error1Parent location circular reference detected for <locationId> <locationUrl>
Config.Error1Parent location id not found parentLocationId for <locationId> <locationUrl>
Config.Error1Parent location id parentId for location <locationId> can not change over time dBaseFileReader
Config.Error1Parent qualifier circular reference detected for <qualifierId> <qualifierUrl>
Config.Error1Period period is listed twice for same location locationId dBaseFileReader
Config.Error1Polygon file <filename> <message> configFile
Config.Error1Properties file missing <filename> configFile
Config.Error1Qualifier csv file missing <csvFile> configFile
Config.Error1Qualifier id is too long (max 64) id configFile
Config.Error1Qualifier with id qualifierId does not exist configFile
Config.Error1QualifierId qualifierId can only be defined once. configFile
Config.Error1Rate-threshold ID <rateThresholdId> occurs more that once in the file Thresholds ! configFile
Config.Error1RatingCurve id <ratingCurveId> <message> configFile
Config.Error1Relation <relationId> in location set creatorLocationSetId is listed twice locationSetFile
Config.Error1Relation relationId in attributeId attribute specified in constraints in sourceId does not exist configFile
Config.Error1Shape id <shapeId> does not exist in column idAttributeName dbfFile configFile
Config.Error1Snap distance is too large. Multiple locations found res;location
Config.Error1Specified <configFile> displayConfigFileName for explorer task <taskName> not found explorerConfigFile
Config.Error1Specify absolute path for global property mapLayersCacheDir and not cacheDir configFile
Config.Error1Start time <startTime> is listed twice for different end time and same location locationId dBaseFileReader
Config.Error1Synch level 0 is not allowed for external parameter
Config.Error1Synch level 1 is not allowed for simulated parameter
Config.Error1Synch level requiredSynchLevel is required for timeSeriesSet
Config.Error1Synch levels [90-100] are reserved for internal use in time series set parameter
Config.Error1The start and end times for <locationId> don't result in a continuous period <inputFilename>
Config.Error1Threshold value set id specifies unit that differs from the unit of the parameter. Please supply a configUnitConversionId in the Parameters configuration, and the corresponding file under the UnitConversions. Skipping unit conversion for now
Config.Error1ThresholdValueSet id <setId> <message> configFile
Config.Error1Time dependent attributes not allowed for validation rules validationRuleSetId limitsName location function configFile
Config.Error1Time series set with id timeSeriesSetsId in filter id not found
Config.Error1Time series stored in external database maps to multiple FEWS time series sets external res internal timeSeriesGroup internal lastMappedTimeSeriesGroup
Config.Error1Time step id <id> <message> configFile
Config.Error1Topology. Module instance <moduleInstanceDescriptorId> not part of workflow <workflowId>
Config.Error1Transformation id <transformationId> <message> configFile
Config.Error1Two buttons for same position configured (row= <row> column= <col> ) for panel <id> configFile
Config.Error1Two gis connections with same id specified id configFile
Config.Error1Two wms connections with same id specified id configFile
Config.Error1Undefined attribute id specified for locationFilterAttributeId configFile
Config.Error1Unit conversion from configUnit to internalUnit not found in <configUnitConversionDescriptor>. Required due to unit specification by thresholdValueSet id
Config.Error1Unit conversion from configUnit to internalUnit not found in <configUnitConversionDescriptor>. Required due to unit specification by validationRuleSet <validationRuleSetId>
Config.Error1Unit conversion from unit to displayUnit not found in <displayUnitConversionsDescriptor>
Config.Error1Unit conversion from unit to displayUnit not found in <displayUnitConversionsDescriptor> parametersConfigFile dBaseFileReader
Config.Error1Unknown cell method text given for parameter id <id> in table table
Config.Error1Unknown cell method text given for parameter id parameterId dBaseFileReader
Config.Error1Unknown comment tag res
Config.Error1Unknown location id <locationId> <filename>
Config.Error1Unknown location relation specified locationRelationId for layer id configFile
Config.Error1Unknown parameter id <parameterId> <filename>
Config.Error1Unknown parameter id parameterId
Config.Error1Unknown region <configFile> type configFile
Config.Error1Unknown standard name modifier test given for parameter id parameterId dBaseFileReader
Config.Error1Unknown standard name modifier text given for parameter id <id> in table table
Config.Error1Unknown standard name standardNameText given for parameter id <id> configFile
Config.Error1Unknown standard name text given for parameter id <id> in table table
Config.Error1Unknown standard name text given for parameter id parameterId dBaseFileReader
Config.Error1Unknown system <configFile> type configFile
Config.Error1ValidationRuleSetCommand type command expected. Found: <commandClassName>
Config.Error1Value type <valueTypeId> not configured configFile
Config.Error1Value type valueTypeId not configured dBaseFileReader sampleMetadataSchemaFile
Config.Error1When coordinates are not available in dbf file for location set creatorLocationSetId the shape file is required locationSetFile dBaseFileReader
Config.Error1When one module instance within a group is referencing a simulated historical all module instances in this group should reference a simulated historical: module instance <moduleInstanceDescriptorId> in group <groupId> <configFile>
Config.Error1When specifying display unit <displayUnit> the displayUnitConversionsId should also be specified configFile
Config.Error1When specifying display unit displayUnit the displayUnitConversionsId should also be specified parametersConfigFile dBaseFileReader
Config.Error1Writing non-temporary output time series header for a module that is only allowed to write temporary output time series
Config.Error1area is missing for locationId dBaseFileReader locationSetFile
Config.Error1area is missing in column areaAttributeName at row <row> dbfFile configFile
Config.Error1attributeId attribute specified in constraints in sourceId does not exist configFile
Config.Error1attributeId attribute specified in constraints in sourceId is not a type attribute configFile
Config.Error1barrier id <barrierId> <message> configFile
Config.Error1branch id <branchId> <message> allLocations
Config.Error1can not unmarshal default unit conversion <configFile> unitConversionsDescriptor configFile unitConversionsFile
Config.Error1cannot find unit conversion <configFile> unitConversionsDescriptor configFile
Config.Error1colorScheme defaultColorSchemeId not defined in colorSchemes
Config.Error1correlation event set id <descriptorId> <message> configFile
Config.Error1current.importType not supports element skipFirstLinesCount
Config.Error1decision id <id> <message> configFile
Config.Error1default filter id defaultFilterId not found configFile
Config.Error1defaultColorScheme defaultColorSchemeId not defined in colorSchemes
Config.Error1display id <descriptorId> <message> configFile
Config.Error1display instance id <descriptorId> <message> configFile
Config.Error1duplicate barrier id <barrierId> configFile
Config.Error1duplicate decision id <decisionId> configFile
Config.Error1duplicate module instance id configFile <configFile>
Config.Error1duplicate property <propertyDefId> <config> <url> <url>
Config.Error1duplicate scale in line widths for layer name configFile
Config.Error1duplicate stateDefinition id stateDefinitionId configFile
Config.Error1duplicate stateTransition id <stateTransitionId> configFile
Config.Error1duplicate stateTransitionValue with Variable id <stateVariableId> configFile
Config.Error1duplicate stateValue id <stateValueId> configFile
Config.Error1duplicate stateVariable id <stateVariableId> configFile
Config.Error1duplicate stateVariableValue id stateVariableId configFile
Config.Error1duplicate time step id <id> configFile
Config.Error1duplicate value type <valueTypeId> <configFile> <url> <url>
Config.Error1duplicate workflow id <id> configFile <configFile>
Config.Error1error for id <message> configFile
Config.Error1filter id <filterId> <message> configFile
Config.Error1filter id <id> parameter id <parameterId> <message> configFile
Config.Error1flag conversion id <descriptorId> <message> configFile
Config.Error1forecastSelection Period for export activity not valid: <message>
Config.Error1grid/location id locationId unknown <configFile>
Config.Error1group id <groupId> <message> configFile
Config.Error1id map id <descriptorId> <message> configFile
Config.Error1location id <id> and parent location id are not allowed to be the same configFile
Config.Error1location id <locationId> <message> configFile
Config.Error1location id <locationId> and parent location id are not allowed to be the same in location set locationSetFile
Config.Error1location id <locationId> listed twice in configFile
Config.Error1location id <locationId> read from virtualFileName in location set <locationSetId> already defined in locations set resourceLocationSetId <url> locationSetsConfigFile
Config.Error1location id and has invalid coordinates for geoDatum configFile
Config.Error1location id is too long (max 64) id configFile
Config.Error1module id <descriptorId> <message> configFile
Config.Error1module instance set id <moduleInstanceId> <message> configFile
Config.Error1more than one upIntId, downIntId or intId have the value downIntId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file
Config.Error1more than one upIntId, downIntId or intId have the value downIntId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file. configFile
Config.Error1more than one upIntId, downIntId or intId have the value intId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file. configFile
Config.Error1more than one upIntId, downIntId or intId have the value upIntId. If an upIntId, downIntId or intId is specified, then its value should be unique throughout the thresholds configuration file. configFile
Config.Error1multiple threshold groups defined with id ' groupId '. Please change thresholds configuration so that each threshold group has a unique id. configFile
Config.Error1multiple thresholds defined with id ' thresholdId '. Multiple thresholds cannot have the same id. Also thresholds that are in different threshold groups cannot have the same id. configFile
Config.Error1no relation locationRelation defined for location
Config.Error1no standard name configured for <parameter> in parameters.xml
Config.Error1number of rows in dbase file ( <rows> ) should be the same as the number of polygons/lines in shape file ( <shapeSize> for location set creatorLocationSetId locationSetFile dBaseFileReader
Config.Error1parameter group id <parameterGroupId> <message> configFile
Config.Error1parameter id <parameterId> parameter group id <id> <message> configFile
Config.Error1parameter id is too long (max 64) id configFile
Config.Error1qualifier id <id> listed twice configFile
Config.Error1qualifier id <qualifierId> and parent qualifier id are not allowed to be the same in location set qualifiersConfigFile dBaseFileReader
Config.Error1rating curve discharge parameter id not found ratingCurveDischargeParameterId configFile
Config.Error1rating curve stage parameter id not found ratingCurveStageParameterId configFile
Config.Error1scale should be specified for line width when using multiple line widths for layer name configFile
Config.Error1shape file <shapeFile> <message> <esriShapeFile> configFile
Config.Error1specify 12 month limits not monthLimitCount for limitsName in validationRuleSetId configFile
Config.Error1state workflow id not found stateWorkflowId for workflow <workflowId> <configFile>
Config.Error1stateDefinition id <stateDefinitionId> <message> configFile
Config.Error1stateDefinition variableId variableId <message> configFile
Config.Error1stateTransition id <startStateValueId> to <endStateValueId> <message> configFile
Config.Error1stateTransitionValue with Variable id <stateVariableId> <message> configFile
Config.Error1stateValue id <id> <message> configFile
Config.Error1stateValue id <stateValueId> <message> configFile
Config.Error1stateVariable id <stateVariableId> <message> configFile
Config.Error1stateVariable variableId variableId <message> configFile
Config.Error1table background colors: Specified end time <endTime> should be after specified start time <startTime> configFile
Config.Error1threshold warning level with id ' downWarningLevelId ' not defined. If no thresholdWarningLevels configuration file is used, then this error can occur if more than 20 warning levels are used. configFile
Config.Error1threshold warning level with id ' upWarningLevelId ' not defined. If no thresholdWarningLevels configuration file is used, then this error can occur if more than 20 warning levels are used. configFile
Config.Error1time step id contains too many elements to store in database <timeStepId> configFile
Config.Error1time step id is required for all time steps configFile
Config.Error1travel time id <descriptorId> <message> configFile
Config.Error1unit conversion descriptor unitConversionsId not found configFile
Config.Error1unit conversion id <descriptorId> <message> configFile
Config.Error1validation rule set id <validationRuleSetId> <message> configFile
Config.Error1validationRuleName for location <locationId> not specified in validation rule set validationRuleSetId. Limits for all locations in validation rule time series sets should be listed configFile
Config.Error1workflow id <descriptorId> <message> configFile
Config.Error1x and y columns should be configured for location set creatorLocationSetId when shape file contains empty/NULL shape. Location locationId locationSetFile dBaseFileReader
Config.Error1x or y is missing for locationId dBaseFileReader locationSetFile
ConfigEditor.Error175Cannot access IdMap with id: idMapId
ConfigEditor.Error175Cannot create command input object for AddLocationCommand
ConfigEditor.Error175Cannot create command input object for IdMap2CommandInput: idMapId
ConfigEditor.Error175Cannot create command input object for IdMapCommandInput: idMapId
ConfigEditor.Error175Cannot create command input object for ValidationRuleSets command with id: <validationRuleSetId>
ConfigEditor.Error175Cannot edit IdMap (id= <id> ) entry for included location (id= <locationId> ) and parameter (id= <parameterId> )
ConfigEditor.Error175Cannot edit IdMap, id= <id> entry for included location, id= <locationId>
ConfigEditor.Error175Cannot edit ValidationRuleSet (id= <validationRuleSetId> ) entry for location (id= <locationId> )
ConfigEditor.Error175IdMapCommand or IdMap2Command type command expected. Found: <commandClassName>
ConfigEditor.Error175Invalid IdMap type in idMap: <id>
ConfigUpdate.Error190<message>
ConfigUpdate.Error190ConfigUpdateScriptController does not support method 'commitWithReview!
ConfigUpdate.Error190Error running script : <absolutePath> Message: <message>
ConfigUpdate.Error190Script directory ' <scriptDir> ' defined in ConfigUpdateScriptConfig file ' moduleInstanceDescriptor ' does not exist
ConfigValidate.Error205validation error occurred for resource: resource ! Please check log file for details!
DAC.Error220<message>
DAC.Error220Cannot refresh datastore
DAC.Error220Error closing dataStore: <message>
DAC.Error220Error closing session
DAC.Error220Error creating DatabaseConnection instance: <message>
DAC.Error220Error disposing lockfile: <message>
DAC.Error220Error flushing timeseries: <message>
DAC.Error220Error getting time from database: <message>
DAC.Error220Error parsing request url: <message>
DAC.Error220Error purging records marked for deletion
DAC.Error220Error refreshing datastore <message>
DAC.Error220Error restarting service: <message>
DAC.Error220Error updating records marked for update of expiry time
DAC.Error220Error while stopping synchronization
DAC.Error220Exception updating session: <message>
DAC.Error220Local data store not disconnected gracefully from connection established at <startTime> <dataSourceUrl>
DAC.Error220Non existing session returned by MC, system activity not in database, wrong JMS or wrong connection specified: sessionTaskRunId
DAC.Error220Problems during login: <message>
DAC.Error220Remove derby local data store to connect to central database derbyDir clientConfigFile
DAC.Error220Remove firebird local data store to connect to central database fdbFile clientConfigFile
DAC.Error220Remove ms access local data store to connect to central database mdbFile clientConfigFile
DAC.Error220Session returned by MC belongs to task run, wrong JMS or wrong connection specified: sessionTaskRunId
DAC.Error220Updating root <configFiles> failed: <message>
DAC.Error220error while compacting cache files: <message>
DAC.Error220error while compacting local database: <message>
DAC.Error220error while running rolling barrel
DataStore.Error2Cannot find default <configFile> tableName name version
DataStore.Error2Cannot find id map <configFile> for <id>
DataStore.Error2Cannot find id map descriptor for idMapId
DataStore.Error2Cannot find unit conversions <configFile> for descriptor
DataStore.Error2Cannot find unit conversions descriptor for unitConversionsId
DataStore.Error2Cannot unmarshal task properties for task <taskDescriptorId>
DataStore.Error2Error parsing task run properties taskRunDescriptor
DataStore.Error2Error reading task properties xml
DataStore.Error2Failed to delete archive meta data from database : <message>
DataStore.Error2Failed to delete attribute modifier from database : <message>
DataStore.Error2Failed to delete modifier from database : <message>
DataStore.Error2Failed to delete module runs from database : <message>
DataStore.Error2Failed to delete systemActivity from database : <message>
DataStore.Error2Failed to delete task run completion from database : <message>
DataStore.Error2Failed to delete task run from database : <message>
DataStore.Error2Invalid aggregation period id <id>
DataStore.Error2Two <configFiles> found with the same name and version <configUrl> <existingConfigUrl>
DataStore.Error2Two default <configFiles> found with the same name <url> <url>
DataStore.Error2error while compacting cache files <message>
DataStore.Error2error while compacting local database <message>
DataStore.Error2errorMsg
EAImport.Error235Could not delete file: <message>
EAImport.Error235EA.Import: Mapping to multiple time series not supported: newKey
EAImport.Error235Error adding import status: <message>
ErrorModel.InvalidData250Simulated values contain missing values for timeseries sets: <timeSeriesSetsInfo> Writing original simulated values to datastore
ErrorModel.InvalidData250Simulated values contain only missing values for timeseries sets: <timeSeriesSetsInfo> Writing original simulated values to datastore
Export.Error265Folder does not exist and/or cannot be created: <absolutePath>
FewsExplorer.Error280<message>
FewsPiService.Error295Error retrieving client configuration: <message>
ForecastingShell.Error310Error removing records marked for deletion:
ForecastingShell.Error310Error updating records marked for update of expiry time:
ForecastingShell.Error310Error while uploading configuration. Message was: <message>
ForecastingShell.Error310Error while uploading data for RecordsPendingUpdateExpiry:
ForecastingShell.Error310Execute query sql failed: <message>
ForecastingShell.Error310Rollingbarrel <message>
ForecastingShell.Error310Updating root <configFiles> failed: <message>
ForecastingShell.Failed325FS should not run under same user as any OC, uncommitted modifiers found for user <user>
ForecastingShell.Failed325Incoming synchronisation failed
ForecastingShell.Failed325Refresh datastore failed: <message>
ForecastingShell.Failed325Start of the continuous synchronisation in the background failed. <message>
ForecastingShell.SynchError340Configuration missing in synchProfiles.xml for profile <profileId> : <message>
ForecastingShell.SynchError340Incremental synchronisation from lastDownloadAllDate failed, retry synchronisation from redownloadFromDate
ForecastingShell.SynchError340Outgoing synchronisation problem
ForecastingShell.SynchError340Outgoing synchronisation problem while removing old taskRunId from table CurrentSessions
ForecastingShell.SynchFailed355DataStore flush before outgoing synchronisation failed
ForecastingShell.SynchFailed355Failed to close Forecasting Shell Session and JMS connection
ForecastingShell.SynchFailed355Outgoing synchronisation failed
ForecastingShell.SynchFailed355Outgoing synchronisation failed fatally with runtime exception
GA.Error370Can not delete an existing directory dir
GA.Error370Can not delete an existing file, file not properly closed by adapter or model file
HtmlWinHelp.Error385Can not display table of contents of file
HtmlWinHelp.Error385Can not display topic topicIntId in file
Import.Error400<gridStartPoint> is an unknown gridCorner type. Use one of the following: <GridCornerTypes>
Import.Error400<message>
Import.Error400Can not read from: <hostName>:<port> for connectionString
Import.Error400Host does not exist: <hostName> for connectionString
Import.Error400No internet/intranet connection available for connectionString
Import.Error400No network connection available
Import.Error400Total size of files in import folder exceeds allowed maximum of <maxSize> MB folderObject
Import.Error400import <dir> failed: <message>
Import.Error400import <serverUrl> failed: <message>
Import.Error400import folder folderObject failed: <message>
Import.Error400import from connection failed: <message>
Import.Error400import from server failed: <message>
Import.Error400import serverUrlString failed: <message>
Import.Error400importing wapdaTelemetric: no resp. wrong parameter qualifier specified ( strColumn ) in the id-mapping for loc/par locId / parId. My means of parameter qualifier the mandatory column number must be specified !
Import.Error400message
Import.Error400message <message>
LocalDataStore.Error415<message>
LocalDataStore.Error415Can not close cacheFile
LocalDataStore.Error415Can not write indexFile
LocalDataStore.Error415can not validate time series float array
LocalDataStore.Error415error while compacting cache files: <message>
LocalDataStore.Error415error while compacting local database: <message>
LocalDataStore.Error415error while finishing synchronisation
LocalDataStore.Error415error while running rolling barrel
LocalDataStore.Error415error while running rolling barrel <message>
LogEntriesArchiver.Error430Initialisation failed, cannot perform Archive Run
LogEntriesArchiver.Error430No LogEntries Archive Run configuration defined
LogEntriesArchiver.Error430No LogEntries Import or Export Archive Run configuration defined
Logout.Failed445Logout from Master Controller failed
LookupWhatIfScenario.Failed460LookupWhatifScenario Failed - <message>
Manual.Error475<modelMessage>
Manual.Fatal490<modelMessage>
ManualForecast.Failed505Sending manual forecast <workflowInfo> failed: <taskRunId>
ManualForecast.Failed505Sending manual forecast <workflowInfo> failed: <taskRunId>, firstInfo, <message>
MapCache.Error520Can not create map cache file cacheFile from resource resource <message> configFile
MapCacheDir.Error535Can not create map cache dir cacheDir
RdbmsExport.ConnectError550Could not connect to target RDBMS
RdbmsExport.ConnectError550JDBC driver not found: <jdbcDriverClass>
ReportExport.DeleteFailed565<message>
ReportSummary.Error580Error reading icon srcPath <message>
ReportSummary.Error580Icon srcPath not found
RerunForecast.Failed595Rerunning forecast task failed: <message>
RetrieveUpdateExpiryTimes.Error610<message>
RollingBarrel.Error625Failed to mark WhatIfScenario whatIfScenarioId for expiry update
RollingBarrel.Error625Failed to mark forecast for expiry update
RollingBarrel.Error625Failed to mark modifier for expiry update
RollingBarrel.Error625Failed to mark records for deletion
RollingBarrel.Error625Failed to purge records marked for deletion
RollingBarrel.Error625Failed to update expiry time of marked records
RollingBarrel.Error625text
SynchManager.Failed640closing of SynchManager failed
SynchManagerImpl.Failed655closing of SynchManagerImpl failed
TaskRun.Failed670Task <workflowId> with ID <taskRunId> failed : Could not flush datastore: <message>
TaskRun.Failed670Task <workflowId> with ID <taskRunId> failed : message
TaskRun.LocalDataStoreSizeCritical685Local Datastore size at forecasting shell fssId is critical. Task <workflowId> with ID <taskRunId> will not be run
TaskRun.LocalDataStoreSizeCritical685Local Datastore size is critical. Task <workflowId> with ID <taskRunId> will not be run
TaskRun.PartlyFailed700<workflowId> with task run id <taskRunId> partly failed because activity <activityId> failed, <message>
TaskRun.PartlyFailed700Workflow <workflowId> with task run id <taskRunId> partly failed because activity <activityId> failed, <message>
TaskRun.RegisterConfigRevision715Unable to determine configuration revision
ThresholdEventsArchiver.Error730Initialisation failed, cannot perform Archive Run
TimeSeriesArchiver.Error745Initialisation failed, cannot perform Archive Run
TimeSeriesBlobManager.Error760<message>
TimeSeriesImport.Error775<configFile> invalid, <message> configFile
TimeSeriesImport.Error775cannot transform the series, <message>
TimeSeriesImport.Error775error adding import status <message>
UpdateExpiryTime.Error790<message>
UpdateExpiryTime.Failed805Update of expiry time of forecast task(s) failed
WhatIfScenario.Error820WhatIfScenario does not support ensembles. Variable <variableId>
WhatIfScenarioDialog.Error828<message>

Warn Event codes for the Operator Client / Forecasting Shell

event_codeevent_iddescription
Amalgamate.Warn835Different synch levels found ( syncLevel workflow and <inconsistentSynchLevel> inconsistentWorkflow ) during amalgamate of <timeSeriesGroup>
Application.Warn850<patchWarnMessage>
Application.Warn850FEWS is not tested for Java 8+
Application.Warn850It is recommended to use a Java 7 JRE with version 1.7.0_11 or higher instead of <java_version>
ArchiveExport.Warn865There are no valid Forecast task runs to archive
Config.Warn880Can not synchronise cache file with original map layer file name specified in configFile
Config.Warn880Closest distance speed optimizations DISABLED. Please configure a (UTM) distance geo datum for irregular lat/long grids/points in the closestDistance transformation config
Config.Warn880Cold states in obsolete external dir are ignored when available in config dir dir obsoleteExternalColdStatesDir
Config.Warn880Cold states in obsolete external dir are overruling cold states in data store obsoleteExternalColdStatesDir
Config.Warn880Do not overwrite time series with an other sync level than before ( synchLevel and previousSynchLevel ) + <timeSeriesGroup>
Config.Warn880Do not specify members or regular expression for ensemble main in time series set
Config.Warn880File extension should be requiredFileExtension : entryName
Config.Warn880File extension should be requiredFileExtension : relPath
Config.Warn880Inverse distance speed optimizations DISABLED. Please configure a (UTM) distance geo datum for irregular lat/long grids/points in the inverseDistance transformation config.
Config.Warn880Location mapping listed twice in id map descriptor : internal: id external: externalId configFile
Config.Warn880Location mapping listed twice in id map descriptor : internal: internalLocationId external: <external> configFile
Config.Warn880Location with id locationId not part of creatorLocationSetId locationSetFile dBaseFileReader at row <row>
Config.Warn880Mapping external id to internal id is ambiguous for PRTF: internalId <configFile>
Config.Warn880Mapping external id to internal id is ambiguous for PTRF: externalId <configFile>
Config.Warn880Mapping internal id to external id is ambiguous for PTRF: internalId <configFile>
Config.Warn880Mapping listed twice: internal ids: internalId external ids externalId
Config.Warn880Mapping listed twice: internal parameter: <internalParameter> internal ensemble member: <internalEnsemble>:<internalEnsembleMemberIndex> external parameter: <externalParameter> external parameter qualifier: <externalParameterQualifier> external location: <externalLocation> in id map configFile
Config.Warn880No configuration available yet
Config.Warn880Parameter mapping listed twice. internal: <internal> ensemble member: <internalEnsemble> : <internalEnsembleMemberIndex> external: <external> external qualifier: <externalQualifier> configFile
Config.Warn880Please specify an absolute path instead of resolvedFileName
Config.Warn880Polygon file <filename> <message> configFile
Config.Warn880Relative view period in time series set not allowed for import time series, please remove period from time series set timeSeriesSet configFile
Config.Warn880Spatial homogeneity check speed optimizations DISABLED. Please configure a (UTM) distance geo datum for lat/long points in the spatial homogeneity check config
Config.Warn880Thiessen will be extremely slow for lat long points. Please configure a (UTM) distance geo datum in the transformation
Config.Warn880When using runInLoopParallelProcessorCount use %TEMP_DIR% or %ENSEMBLE_MEMBER_ID% tags in your general adapter configuration to ensure every thread uses it's own directory configFile
Config.Warn880dBaseFileReader is listed more than once, read table once and filter with constraints locationSetFile
ConfigExport.Warn895Failed to export configuration <columnValue> with version <version>. <message>
Connection.Lost910communication problem reported
Connection.ReconnectFailed925OCSession has expired. Need to logout
Connection.ReconnectFailed925connection could not be restored yet
Connection.ReconnectFailed925reconnection ( attempts ) to master controller failed
Connection.Reconnecting940trying to re-login
Connection.Reconnecting940trying to reconnect
DAC.Warn955Empty table LastDatabaseConnection detected, skipping check for graceful disconnect
DAC.Warn955Root config updated. DAC needs to be restarted!
DAC.Warn955RootConfigUpdater.Warn: Root <configFile> is read-only: <filename>
DataStore.Warn970Grid geometry for location <locationId> is changed in RegionConfigFiles/Grids.xml, can not read old grid
DataStore.Warn970Grid geometry for location <locationId> is no longer available in RegionConfigFiles/Grids.xml, can not read old grid
DataStore.Warn970Profile geometry for location <locationId> is changed in RegionConfigFiles/Branches.xml, can not read old profile
DataStore.Warn970Profile geometry for location <locationId> is no longer available in RegionConfigFiles/Branches.xml, can not read old profile
EAExport.Warn985Error occurred during export: Validation against XML Schema: schemaFileName failed due to: <message>
EAImport.Warn1000Backup folder does not exist: folderText
EAImport.Warn1000Can not find validation schema schemaFileName
EAImport.Warn1000Could not move file to backup folder: <message>
EAImport.Warn1000Could not move file to failed folder: <message>
EAImport.Warn1000EaImport.Warning: Error importing file filePath : <message>
EAImport.Warn1000EaImport.Warning: Validation against XML Schema: schemaFileName failed due to: <message>
EAImport.Warn1000Error during loading of StartTimeShift map: <message>
EAImport.Warn1000Failed folder does not exist: folderText
EAImport.Warn1000Import folder folderText does not exist, Cannot perform EA-import <moduleDescriptorName>
EAImport.Warn1000Import folder missing
EAImport.Warn1000message
ErrorModel.InvalidData1015<message>
ErrorModel.InvalidData1015Can not perform Boxcox transformation. Simulated data contains values smaller than or equal to zero
ExportArchive.MissingWhatIfScenarios1030Could not retrieve all required archive WhatIfScenarios from datastore: missingList
ExportArchive.Modifiers1045Could not retrieve all required archive Modifiers from datastore: missingList
ExportArchive.States1060Could not retrieve all required archive WarmStates from datastore: missingList
ExportArchive.TaskRuns1075Could not retrieve all required archive TaskRuns from datastore: missingList
ExportArchive.Tasks1090Could not retrieve all required archive Tasks from datastore: missingList
FewsExplorer.Warn1105Can not find fileName
FewsExplorer.Warn1105login error
FewsPiService.Warn1120No timeseries content retrieved for query 'getTimeSeriesForFilter' with filterId: filterId
FewsPiService.Warn1120No timeseries content retrieved for query 'getTimeSeriesHeadersForFilter' with filterId: filterId
FewsPiService.Warn1120No timeseries sets retrieved for filterId filterId
ForecastingShell.Warn1135<patchWarnMessage>
ForecastingShell.Warn1135Fews is not tested for Java 8+
ForecastingShell.Warn1135It is recommended to use a Java 7 JRE with version 1.7.0_11 or higher instead of <java_version>
GA.Warn1150Dump directory does not exist <dumpFileDir>
GA.Warn1150File will not exist on linux case sensitive file system. specified: specifiedPath file system: fileSystemPath
GA.Warn1150Passing environment variables to executable not implemented for windows
HymosTranserDbImport.Warn1165<message>
Import.Warn1180External time series can not be mapped to FEWS time series externalHeader
Import.Warn1180Invalid directory: <selectedDirectory>
Import.Warn1180Line contains an unexpected unit at line <lineNumber> <fileUnit> will be used
Import.Warn1180Line contains less than 6 columns at line <lineNumber>
Import.Warn1180error occurred when attempting to insert configType into table tableName
Import.Warn1180error occurred when attempting to insert configType into table tableName. Check that the default table points to an existing configuration
Import.Warn1180import failed as file type childType incompatible with node parentNode
Import.Warn1180import of file failed: <candidate>
Import.Warn1180message
Import.Warn1180message <message>
ImportAmalgamate.Warn1195AMALGAMATE ORPHANS ENABLED. RE-AMALGAMATING COMPLETE DATABASE. This should only be executed once on a data store that not had an active amalgamate module running for a long time
ImportArchive.ImportWarn1210Unable to import <problemListSize> of the <size> records of data type: <className> due to an incomplete archive
JdbcServer.Warn1225<patchWarnMessage>
LocalDataStore.Warn1240<message> configFile
LocalDataStore.Warn1240Cache cannot be read indexFile
LocalDataStore.Warn1240Can not add modifier for never written time series when module instance set configured in time series set: <moduleInstanceSetId>
LocalDataStore.Warn1240Dbf file is required when using attributes in tooltip, select by map item, dateTime or using class breaks fileName
LocalDataStore.Warn1240File should start with configFilesCache cacheFile
LocalDataStore.Warn1240File should start with configFilesIndex indexFile
LocalDataStore.Warn1240Internal data store problem, blob reference counter is 0
LogEntriesArchiver.Warn1255Archive manifest data not set
Login.Failed1270Cannot Log to Master Controller: mcId
Login.Failed1270Cannot Log to Master Controller: mcId <message>
Logout.Interrupted1285from Master Controller : <mcId> interrupted after time out
Logout.Warn1300Error occurred while logging out of system
Logout.Warn1300Exception occurred during logging out: <debugTrace>
Manual.Warn1315<modelMessage>
Manual.Warn1315message
ModuleDataSetUpdater.Warn1330Module data set file is read-only: <filename>
ModuleDataSetUpdater.Warn1330No Entries found in data set moduleDataSetFile
RepairAndDefrag.Warn1345line
RollingBarrel.Warn1360text
RootConfigUpdater.Warn1375Root <configFile> is read-only: <filename>
TableStorage.Warn1390Could not find SystemActivity row for TaskRunCompletion row taskRunId
TableStorage.Warn1390Could not find TaskRun row for TaskRunCompletion row taskRunId
TableStorage.Warn1390Inconsistent ensemble partition between completion and run table taskRunId
TaskDispatcher.NotLoggedOn1405To run a task please log on to a MasterController
TaskRun.LocalDataStoreSizeWarn1420Local Datastore size at forecasting shell fssId is nearing critical - current size is <endDataBaseSize> MB - Check if Rolling Barrel task is running properly
TaskRun.LocalDataStoreSizeWarn1420Local Datastore size is nearing critical - current size is <endDataBaseSize> MB - Check if Rolling Barrel task is running properly
TaskRun.Warn1435Forecast task <workflowId> with ID <taskRunId> cannot be approved, since task did not create any simulated time series, states and/or reports
ThresholdEventsArchiver.Warn1450Archive manifest data not set
ThresholdEventsArchiver.Warn1450No ThresholdEvent Archive Run configuration defined
ThresholdEventsArchiver.Warn1450No ThresholdEvent Import or Export Archive Run configuration defined
TimeSeries.Changed1465ModuleInstance= module locationId= <locationId> parameterId= <parameterId> timeStep= timestep period= changedPeriod number of time steps changed <valueCount>
TimeSeriesArchiver.EmptyList1480No TimeSeries found that match the criteria for this archive run. No archive will be written
TimeSeriesArchiver.Warn1495Archive manifest data not set
TimeSeriesArchiver.Warn1495No Archive Export Run configuration defined
TimeSeriesArchiver.Warn1495No ModuleInstanceIds of TimeSeries to archive configured
TimeSeriesArchiver.Warn1495No TimeSeries Export or Import Archive Run configuration defined
TimeSeriesImport.Warn1510<message>
TimeSeriesImport.Warn1510File virtualFileName has unknown format
TimeSeriesImport.Warn1510Invalid value-format in the line: line . Is the data format valid ?
TimeSeriesImport.Warn1510The number of read cell-values ( cellCount ) does not correspond with the grid-size ( gridSize ). Stop reading the file !
Transformation.Warn1525Cannot find rating curve for location ' <location> ' and qualifierSet ' <qualifierSet> '
WhatIfScenario.Warn1540<message>

Info Event codes for the Operator Client / Forecasting Shell

event_codeevent_iddescription
Amalgamate.Info1570Amalgamate valueType for run descriptor ( <index> / <systemActivityDescriptorsCount> ) with (<amalgamateBlobsRead>) rows ( <importRunDiskSpace> )
Amalgamate.Info1570No import runs found to amalgamate
Amalgamate.Info1570amalgamateBlobsRead rows ( <amalgamateReadDiskSpace> ) amalgamated to <rows> rows ( <writtenDiskSpace> )
Application.Info1585<fewsApplicationInfo>
ArchiveExport.Finished1600Finished Archive-export
ArchiveExport.Info1615Number of files in Archive Export directory is <fileCount>
ArchiveExport.Started1630Started Archive-export
ArchiveImport.Started1645Started importing archive file
ArchiveTaskPage.Info1660Performing rolling barrel finished successfully
ArchiveTaskPage.Info1660Start performing rolling barrel
CompactCacheFiles.Info1675start compacting the database
CompactCacheFiles.Info1675start performing compact cache files
CompactCacheFiles.LocalDataStoreSize1690local datastore size at forecasting shell <forecastingShellId> is size MB
Config.CheckFinished1705Check of configuration finished
Config.CheckStarted1720Check of configuration started
Config.Info1735New default file found: defaultFile
ConfigUpdate.Finished1750for Task - taskRunDescriptor
ConfigUpdate.Info1765No script files to import
ConfigUpdate.Info1765Start running configuration update scripts from directory <scriptDir>
ConfigUpdate.Started1780for Task - taskRunDescriptor
Connection.ReEstablished1795connection to master controller re-established
Connection.ReconnectSuccessful1810connection has been restored
CorrelationController.CorrelationFinished1825Correlation finished
CorrelationController.CorrelationStarted1840Correlation started for task - taskRunDescriptor and ModuleInstance moduleInstanceDescriptor
DAC.Info1855Compacting cache files finished
DAC.Info1855Compacting cache files started
DAC.Info1855Compacting local database finished
DAC.Info1855Compacting local database started
DAC.Info1855Creating remote session <sessionDescription>
DAC.Info1855Finished purging records marked for deletion
DAC.Info1855Finished rolling barrel
DAC.Info1855Finished updating records marked for update of expiry time
DAC.Info1855Initializing DataAccessComponent name
DAC.Info1855Initializing client <configFile>: <configFile>
DAC.Info1855Loading global properties: <configFile>
DAC.Info1855Log4j initialized for service <servletContextName>
DAC.Info1855Logged in to MC mcId
DAC.Info1855No global properties file available
DAC.Info1855RegionId= regionId
DAC.Info1855Remote session cannot be initialized, will work in stand-alone mode
DAC.Info1855Restarting DataAccessComponent: bindName
DAC.Info1855Start purging records marked for deletion
DAC.Info1855Start rolling barrel
DAC.Info1855Start updating records marked for update of expiry time
DAC.Info1855Starting synchronisation with profile: profileId
DAC.Info1855Stopping DataAccessComponent
DAC.Info1855Successfully loaded DAC name
DAC.Info1855Using resource Id: resourceId
DataStore.Finished1870Compact cache files finished
DataStore.Info1885Compact time series cache files
DataStore.Info1885Compact warm state cache files
DataStore.NewCurrentRun1900Task run <taskRunId> is made current typeText
DataStore.Start1915Compact cache files started
DecisionModule.Info1930conditionRules = ' <conditionRules> '; transitionRules = ' <transitionRules> '
DecisionModule.Info1930inputState = ' <inputStateValue> '; outputState = ' <outputStateValue> '
DecisionModule.NoStateChange1945no stateChanges detected
DecisionModule.StateChange1960stateChange due to rule 'barrierId = <barrierId> ; decisionId = <id> '
EAExport.FileCount1975Number of files in Export directory is <fileCount>
EventCrossingModule.Completed1990Event crossing module completed
EventCrossingModule.Started2005Event crossing module started
Export.Finished2020Export of configuration finished <configNode>
Export.Started2035Export of configuration started <configNode>
FewsModuleAdapterLauncherEventType.Info2050<message>
FewsPiService.Info2065Using client configuration file clientConfigFileID
ForecastLengthEstimator.Info2080Established Forecast Length as forecastLength hours
ForecastLengthEstimator.Info2080Last observation found at <lastValueTime>
ForecastLengthEstimator.Info2080Time0 set to <time>
ForecastLengthEstimator.Info2080type state found at <stateTime>
ForecastingShell.Info2095<fewsApplicationInfo>
ForecastingShell.Info2095Finished purging records marked for deletion
ForecastingShell.Info2095Finished purging updating records marked for update of expiry time
ForecastingShell.Info2095Finished rolling barrel
ForecastingShell.Info2095Local datastore <localDataStoreDir>
ForecastingShell.Info2095Root config updated, new root config will be used for next run on FSS <forecastingShellId>
ForecastingShell.Info2095Start purging records marked for deletion
ForecastingShell.Info2095Start rolling barrel
ForecastingShell.Info2095Start updating records marked for update of expiry time
ForecastingShell.Info2095Synchronization will not be available because session is not initialized
ForecastingShell.Started2110Forecasting shell started
ForecastingShell.SynchCompleted2125Incoming synchronisation completed successfully
ForecastingShell.SynchCompleted2125Second attempt incoming synchronisation completed successfully, taskrun taskRunId not downloaded
ForecastingShell.SynchFinished2140Configuration upload finished
ForecastingShell.SynchStarted2155Configuration upload started
ForecastingShell.SynchStarted2155ForecastingShell.Info: Full non incremental synchronisation started
ForecastingShell.SynchStarted2155ForecastingShell.Info: Incremental synchronisation from lastDownloadAllDate started
Gui.Initialized2170Configuration manager GUI initialized
Gui.Initialized2170Graphical user interface initialized
HymosTransferDbImport.Started2185for Task - taskRunDescriptor
Import.Finished2200Import of configuration finished
Import.Info2210External time series successfully mapped to FEWS time series externalHeader
Import.Started2215Import of configuration started
JdbcServer.Info2230<fewsApplicationInfo>
LocalDataStore.Info2245Compacting cache files finished
LocalDataStore.Info2245Compacting cache files started
LocalDataStore.Info2245Compacting local database finished
LocalDataStore.Info2245Compacting local database started
Login.Finished2260Successfully logged in to Master Controller: mcId. Session ID <taskRunId>
Login.Started2275Login to Master Controller
Logout.Finished2290Logged out from Master Controller : <mcId>
Logout.Finished2290Successfully logged out from Master Controller : <mcId>
Logout.Started2305Logging out from Master Controller : <mcId>
Manual.Info2320<modelMessage>
Manual.Info2320message
Manual.SystemInfo2335<modelMessage>
ManualForecast.Started2350Manual forecast <workflowInfo> has been sent to the task scheduler
ManualForecast.Started2350infoText
MapCache.Info2365Create new cache file for mapRemoteFile
RdbmsExport.Info2380Export finished
RdbmsExport.Info2380Exporting filters
RdbmsExport.Info2380Exporting locations
RdbmsExport.Info2380Exporting parameters
RdbmsExport.Info2380Exporting timeseries and timeseriedata
RdbmsExport.Info2380Start export
RepairAndDefrag.Info2395repair and defrag local data store completed, current size size MB
RepairAndDefrag.Info2395repair and defrag local data store started
ReportExport.Info2410free diskspace for the export dir is freeDiskSpace MB
RerunForecast.Started2425Rerun of forecast task has been sent to the task scheduler
RollingBarrel.Info2440text
SynchManager.Started2455SynchManager started using profile <profileId>
TableStorage.Info2470The local datastore was not closed properly. Pool cache file not updated after growth of row cache file with rowCacheSizeGrowth bytes
TaskRun.Completed2485Task <workflowId> with ID <taskRunId> completed in <timespan>
TaskRun.Started2500Starting Task <workflowId> with ID <taskRunId> with Whatif <whatIfDescriptorName> and T0 <T0> and forecastLengthText available memory <heapSize> - <usedMemoryAfterGC>
TaskRun.TimeSpend2515<runTimeInfo>
UpdateExpiryTime.Scheduled2530Update of expiry time of forecast task(s) has been scheduled
Workflow.ActivityCompleted2545<workflowId> completed in <timespan>
Workflow.ActivityStarted2560<workflowId>

Debug Event codes for the Operator Client / Forecasting Shell

event_codeevent_iddescription
ArmaFilter.Debug2575the first element of matrixAr (the zero-order AR coefficient) must be equal to one, but was matrixAr.get(0, 0). Zero-order AR coefficient changed to 1
ArmaFilter.Debug2575the first element of matrixMa (the zero-order MA coefficient) must be equal to one, but was matrixMa.get(0, 0). Zero-order MA coefficient changed to 1
Calibration.Running2590Calibration Running
Config.Debug2605An import/amalgamated run should not expire. The original (import) run is deleted after successful amalgamation. Expiry time can be configured in the workflow descriptors
ConfigExport.Debug2620Finished export of configuration <config> with version <version>
DAC.Debug2635Checking Database time
DAC.Debug2635Closing database connection
DAC.Debug2635Closing database connection finished
DAC.Debug2635Closing datasource finished
DAC.Debug2635Data Access Component loaded with regionId: <regionId>
DAC.Debug2635Disposing dataStoreLockFile
DAC.Debug2635Failed to make localDataStore dir writable! <localDataStoreDir>
DAC.Debug2635Finished initialization
DAC.Debug2635Initializing RegionId
DAC.Debug2635Initializing datasource
DAC.Debug2635Initializing datastore dir: <localDataStoreDir>
DAC.Debug2635Initializing localDataStore
DAC.Debug2635Initializing session manager if available
DAC.Debug2635Initializing synchronization
DAC.Debug2635Log4j initialized for DAC regionHome
DAC.Debug2635Retry on SQLRecoverableException <message>
DAC.Debug2635Stopping synchronization
DAC.Debug2635Synchronization will not be available because session is not initialized
FewsInstance.Shutdown2650Close without Closing database connection
FewsInstance.Shutdown2650Closing log
FewsInstance.Shutdown2650Closing the time series table trigger
FewsInstance.Shutdown2650Ensuring deletion of file user
FewsInstance.Shutdown2650shutdown TempDirFactory
GA.Debug2665Directory simultaneously deleted by other thread or process dir
GA.Debug2665File simultaneously deleted by other thread or process file
Import.Debug2670External id externalId can be not be mapped to FEWS parameter/location id with id map <configFile>
ImportArchive.Debug2680Failed to import data item with key <key>
LocalDataStore.Debug2695<message>
LookupWhatIfScenario.Completed2710LookupWhatifScenario Completed
LookupWhatIfScenario.Started2725LookupWhatifScenario Started
Manual.Debug2740<modelMessage>
TaskRun.Debug2755ModuleInstance moduleInstanceId called more than once.
TaskRun.Debug2755Task <workflowId> with ID <taskRunId> : msg
TimeSeriesImport.Debug2770import finished, number of processed time series from the file <filename> : importedTimeSeriesCount