...
- Import your SOBEK 2 model with the help of the import feature in SOBEK 3.
- Check the import log messages. Are there any features that are not supported, any values that are modified by the import tool?
- Modify your SOBEK 2 model accordingly: delete features that are not supported in SOBEK 3.
- Repeat the three steps above until there are no model differences between the SOBEK 3 model and the SOBEK 2 model.
To import the model, use the DeltaShell import tool:
SOBEK 3 import window. Choose "SOBEK Model (Flow 1D, RTC, RR, WAQ)". This window is accessible via File --> Import
Select case after opening CASELIST.CMT
Dependent from the choices you make, you receive an integrated model with the following sub-models:
- water flow 1d
- real-time control
The following list gives examples for modifications that might be necessary:
...
Rainfall measurement stations in 1D-Flow
If your SOBEK 2 1D-Flow
...
model contains lateral stations that get inflow from rainfall-runoff features like
- rational method
- rational method with rainfall measurement stations
these features must be added manually within a rainfall-runoff (D-RR) model.
- Add a new model to the project: right mouse-click on the project, choose "New Model..."
- Select "Rainfall Runoff Model"
- Move it to integrated model.
Finalization
Add features that could not be imported from the original SOBEK 2 model:
...