...

Compare simulation results and modify model data

Change the numerical parameters Iadvec1D from 4 to 1 and Limtyphu1D from 100 to 0 according to SOBEK 3 user manaual, section 5.10.2.10 (Parameter set for comparison with SOBEK 2, Deltares Systems, 2013).

Run a simulation with your modified SOBEK 2 model with the channel flow module only.

...

• Add a new model to the project: 
  • right mouse-click on the project, choose "New Model...": 
  • 
• Select "Rainfall Runoff Model"
• Move it to integrated model 
  • 
• Import precipitation data (a *.bui file) from your SOBEK 2 model
• Create catchments
• modify the open water property
  • fill in the catchment area
  • choose the appropriate Rainfall Station (corresponds to the precipitation data)
• connect the catchment to the corresponding lateral node in the water flow 1d network.

References

Deltares Systems (2013): 1D/2D modelling suite for integral water solutions / SOBEK Suite / D-Flow 1D and D-Real Time Control in Delta Shell / User manual. Version: 3.0.1.29328, 30 July 2013 Deltares: Delft, The Netherlands.

Meijer, D. (2015): Results acceptance test FLOW 1D and RTC SOBEK 3. Deltares draft report 1205718-000-DSC-0124-v1.

...