...

Now you see cross-section related to cross-section 2 and 3.

Working with Structures

The functionality of structures is under construction.Image Added

• Create a network with branches and a cross-sections on each branch.
• Select create weir from the structure tools.
• Click on a branch to create a weir.
• On another branch, put two weirs on the same location to create a compound structure.
• Select create pump from the structure tools.
• Click on another branch to create a pump.

Image Added

The structures are added to the network. Now we can adjust the settings.*

• Click on the weir

...

• .

Now you You see the cross-sectional view of the weir with closest the nearest cross-section in the background. The default settings of the weir are OK.
* The cross-sectional view cannot be displayed when there is no cross-section on the branch.

• Click on the compound structure

Image Added

You Now you see the cross-sectional view of a compound structure with closest the nearest cross-section in the background. This compound structure consist of two weirs, but more weirs of or other structures can be added. The background is colored red as a warning, because the two weirs overlap. To adjust the weirs:

• Click on the weir in the cross-sectional view.
• Adjust the width of one weir in 50m.
• Click on the other weir in the cross-sectional view.
• Adjust the offset in 250m.
• Adjust the width in 50m.

Image Added

The indication of overlapping structures (red background) is gone

...

To adjus the settings of the pump:

• Click on the pump.
• Deselect the control level on the delivery side.
• Adjust the control levels on the suction side in -4m for switch-on and -5 for switch-off.

Image Added

Image Added

Import a network

This section describes two possibilities to import a network:

...