...
Maximum relative error between SLIQ2D-DOS and D-FLOW SLIDE:
Case | Slope angle at which instability occurs (Tan Alpha) | Tan Alpha_p | Ko_p | Normal stress p | Deviatoric stress q |
|---|---|---|---|---|---|
bm5-1a | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1b | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1c | 0.00 | 0.54 | 0.13 | 0.00 | 0.00 |
bm5-1d | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1e | 0.00 | 0.00 | 0.00 15 | 0.00 | 0.00 02 |
bm5-1f | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1g | 0.00 | 0.00 | 0.00 12 | 0.00 | 0.00 02 |
Results between SLIQ2D-Windows and D-FLOW SLIDE are exactly the same for the tangent angle, as show in the table below.
Maximum relative error between SLIQ2D-Windows and D-FLOW SLIDE for the tangent angle:
Case | Tan Alpha |
|---|---|
bm5-1a | 0.00 % |
bm5-1b | 0.00 % |
bm5-1c | 0.00 % |
bm5-1d | 0.00 % |
bm5-1e | 0.00 % |
bm5-1f | 0.00 % |
bm5-1g | 0.00 % |