Versions Compared

Old Version 29

changes.mady.by.user Daniel Twigt

Saved on

compared with

New Version 30

changes.mady.by.user Daniel Twigt

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
<map parameter="Mean wave direction" layer="1" fewsParameter="Wave.direction.mean.ext" fewsLocation="Guanabara.wave.ext"/>
<map parameter="Mean wave period" layer="1" fewsParameter="Wave.period.mean.ext" fewsLocation="Guanabara.wave.ext"/>
<map parameter="Peak wave direction" layer="1" fewsParameter="Wave.direction.peak.ext" fewsLocation="Guanabara.wave.ext"/>
<map parameter="Peak wave period" layer="1" fewsParameter="Wave.period.peak.ext" fewsLocation="Guanabara.wave.ext"/>
<map parameter="Sign.wave height" layer="1" fewsParameter="Wave.sign.height.ext" fewsLocation="Guanabara.wave.ext"/>

For examples, see the adapterConfiguration_example_*.xml files attached to this WiKi page.

3. Template files and keywords

...

Keyword

Description

FLOW_TIME_START

Start of the simulation (format in accordance with Delft3D-FLOW).
(This is actually the time in minutes since the reference time, found in the mdf-file)

FLOW_TIME_STOP

Stop of the simulation (format in accordance with Delft3D-FLOW)
(Ditto as the start time)

FLOW_TIME_RST

Duration of the simulation – useful for setting the time interval of writing the restart files so that only one restart file is written at the end of the simulation.

FLOW_TIMESERIES

Placeholder to fill in the timeseries in the so-called tim format (only the time and data, not the header).
The keyword should be followed by the names of all timeseries that should be filled in there, separated by a comma and one or more spaces:

$(FLOW_TIMESERIES: h/bound-1 salinity/bound-1, temperature/bound-1)

(Despite the fact that the "tim" format is used more widely than just FLOW, there are some specifics involved.)

FLOW_MAPSTACK

Placeholder for the name of the file that will hold the scalar field data (as found in the map stack files). It should be followed by the name of the parameter:

$(FLOW_MAPSTACK: pressure)

Then:

  • The string "FLOW_MAPSTACK pressure" is replaced by "pressure.dat"
  • The file "pressure.dat" contains the map stacks in the format proper to Delft3D-FLOW
  • The XML-file "map_pressure.xml" in the input directory contains the details: which ASCII files and so on.

WAQ_TIME_START

Start of the simulation (format in accordance with Delft3D-WAQ/ECO: yyyy/mm/dd-hh:mm:ss)

WAQ_TIME_STOP

Stop of the simulation (format in accordance with Delft3D-WAQ/ECO: yyyy/mm/dd-hh:mm:ss)

WAQ_TIMESERIES

Placeholder to fill in the timeseries in the WAQ /ECO format (only the time and data, not the header).
The keyword should be followed by the names of all timeseries that should be filled in there, separated by spaces:

$(WAQ_TIMESERIES: salinity/bound-1, temperature/bound-1)

WAQ_MAPSTACK

Placeholder for the name of the file that will hold the scalar field data (as found in the map stack files). It should be followed by the name of the parameter:

$(WAQ_MAPSTACK: windvel)

Then:

  • The string "WAQ_MAPSTACK windvel" is replaced by "windvel.dat"
  • The file "windvel.dat" contains the map stacks in the format proper to Delft3D-WAQ/ECO
  • The XML-file "map_windvel.xml" in the input directory contains the details: which ASCII files and so on.

PART_RUNID

The run ID for the Delft3D-PART computation (used in the filename.dat file)

PART_TIMESERIES

Placeholder to fill in the timeseries in the PART format, similar to the WAQ and FLOW timeseries keywords.

COUP_TIME_START

Start time of coupling (in seconds; time frame is that of Delft3D-FLOW)

COUP_TIME_STOP

Stop time of coupling (in seconds; ditto)

P.M.

Keywords specific to Delft3D-WAVE

For examples, see the MDF, MDW, BCC, WND, BND and INP files attached to this WiKi page.

4. Running model adapter and Delft3D from FEWS

...

The Delft3D model executable can be called directly (as shown in the above example), of by calling an external batch file to execute the model.

For examples, see the generalAdapter_example_*.xml files attached to this WiKi page.

5. Configuration errors

The adapter checks for the following types of errors:

...