...
Section | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
|
...
Step 5.1 Check table structure of all worksheets in Data spreadsheet handed over
Go to #Step Step 5.2. Grids_loc
The starting condition of this step is a populated DataTemplate, which contains all relevant information for the model.
When running the locations-generator macro, it will pick up this spreadsheet, conduct a variety of checks and sorts all locations in the appropriate order. For this purpose, the Generator uses hard-coded references to named worksheets and specific columns within a worksheet. To prevent failure in this processing, the following checks the need to be conducted on the table structure of the populated DataTemplate.
Info | |||||
---|---|---|---|---|---|
Please pay attention to the calculation mode specified in Excel. This mode should be set to Automatic. If this is not set to automatic it could result in a wrong interpretation of abstraction for child wells. |
The comparison is done against the Empty_DataTemplate spreadsheet.
...
- Remove the example rows (if any) such that the row 40 is the first one containing the actual data
- Populate column I (OSreference) based on NGR (Easting, Northing) of borehole (column K and L).
- Check that column A,B,C,D are populated in correspondence to the provided runs (ModuleDataSets)
- Check that the number of locations/licences as listed in the spreadsheet corresponds (at least) to the number of wells in each WEL-file
- Define concatenate functions for cell B16, B17, B18, B19, B21, B22. The actual contents depends on data availability.
- Verify that the column(s) as used for the concatenate functions are properly populated with appropriate information (i.e. preferably no empty cells, 'unknowns, 'na' etc.). If necessary apply an 'IF-construction on the concatenate function. This verification is especially critical for columns being used in location names.
Info Expand Expand recommended concatenations with max. 4 WEL files Expand recommended concatenations with max. 4 WEL files cell
item
used in
recommended content
recommended concatenate function
B16
LocationName
Explorer (map and filter)
licence code, purpose code (if any), site name, layer
=IF(O40<>"";F40&""&G40&" - "&S40&" (L"&O40&")";F40&""&G40&" - "&S40)
B17
ShortName
Graph legends
if possible shorter version of above
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="d5259a773e705f17-2746bf38-4153430c-8b1e83f6-558aedc2da699bafdbf1aa11"><ac:plain-text-body><![CDATA[
B18
LocationDescription
Description in Explorer-tooltip
location type, GW-unit, Formation
=T40 & " modelled at ("&M40&", "&N40&") [R"&p40&", C"&q40&"] in GW-unit " & W40 & " ("&X40&") from " & Y40 &" formation."
]]></ac:plain-text-body></ac:structured-macro>
B19
Tooltip on map
free text Explorer-tooltip
licence holder, licence details, NGR, model coordinates (XYZ and RC)
=IF(U40="";"";"Licence holder: " &U40 & " (" &F40 & " - "&G40&") located at NGR ("&K40&", &L40& "), Row: "&P40&", Column: "&Q40&", Layer: "&O40&"
B21
Caption
Shortcuts in GraphDisplay
see shortname or variations
see shortname or variations
B22
Shortcut
Shortcuts in GraphDisplay
see shortname or variations
see shortname or variations
...
- Remove the example rows (if any) such that the row 36 is the first one containing the actual data
- Populate column D (OSreference) based on XY-coordinate of the associated grid cell (column H and I).
- Define concatenate functions for cell B14, B15, B16, B17, B19, B20. The actual contents depends on data availability.
- Verify that the column(s) as used for the concatenate functions are properly populated with appropriate information (i.e. preferably no empty cells, 'unknowns, 'na' etc.). If necessary apply an 'IF-construction on the concatenate function. This verification is especially critical for columns being used in location names.
- Verify that observation locations do not refer to layer numbers which are not supported by the model. Data mapping is done on a model layer basis. Hence, an observation in layer 0 will not receive information if the model contains layer 1-3.
Info Expand Expand recommended concatenations Expand recommended concatenations cell
item
used in
recommended content
recommended concatenate function
B14
LocationName
Explorer (map and filter)
site name & site code (optional layer)
=N36&" - "&C36
B15
ShortName
Graph legends
if possible shorter version of above
<ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="72fa607026e544fc-2a4b794a-48e74599-87fab3f5-982da879914b377607968185"><ac:plain-text-body><![CDATA[
B16
LocationDescription
Description in Explorer-tooltip
location type, GW-unit, Formation
=O36 & " modelled at ("&H36&", "&I36&") [R"&K36&", C"&L36&") in GW-unit " & P36 & " ("&Q36&") from " & R36 &" formation."
]]></ac:plain-text-body></ac:structured-macro>
B17
Tooltip on map
free text Explorer-tooltip
borehole details (if any), NGR, model coordinates (XYZ and RC)
="BH top: "&U36&" mAOD, base: "&V36&" mAOD, located at NGR ("&F36&", "&G36&"), Row: "&K36&", Column: "&L36&", Layer: "&J36&"
B19
Caption
Shortcuts in GraphDisplay
see shortname or variations
see shortname or variations
B20
Shortcut
Shortcuts in GraphDisplay
see shortname or variations
see shortname or variations
...
- Remove the example rows (if any) such that the row 35 is the first one containing the actual data
- Populate column B (OSreference) based on XY-coordinate of the associated grid cell(column F and G).
- Define concatenate functions for cell B12, B13, B14, B15, B17, B18. The actual contents depends on data availability.
- Verify that the column(s) as used for the location name are properly populated with appropriate information (i.e. preferably no 'unknowns, 'na' etc.)
- Verify that observations do not refer to layer numbers which are not supported by the model. Data mapping is done on a model layer basis. Hence, gaugeboards in layer 0 do not receive information if the model contains layer 1-3).
Info Expand Expand recommended concatenations Expand recommended concatenations cell
item
used in
recommended content
recommended concatenate function
B12
LocationName
Explorer (map and filter)
site name & site code
=L35&" - "&A35
B13
ShortName
Graph legends
if possible shorter version of above
B14
LocationDescription
Description in Explorer-tooltip
site description, river (if necessary)
=M35 & " " & N35
B15
Tooltip on map
free text Explorer-tooltip
NGR, model coordinates (XYZ and RC)
="Easting: "&D35&", Northing: " &E35& " Model-X: "&F35& ", Model-Y: "&G35&" Row: "&I35&", Column: "&J35&", Layer: "&H35&" "
B17
Caption
Shortcuts in GraphDisplay
see shortname or variations
see shortname or variations
B18
Shortcut
Shortcuts in GraphDisplay
see shortname or variations
see shortname or variations
...
- Remove the example rows (if any) such that the row 37 is the first one containing the actual data
- Populate column L (OSreference) based on the NGR-coordinate of the discharge or abstraction point (column N and O).
- Define concatenate functions for cell B14, B15, B16, B17, B19, B20. The actual contents depends on data availability.
- Verify that the column(s) as used for the concatenate functions are properly populated with appropriate information (i.e. preferably no empty cells, 'unknowns, 'na' etc.). If necessary apply an 'IF-construction on the concatenate function. This verification is especially critical for columns being used in location names.
Anchor | ||||
---|---|---|---|---|
|
...
Step 5.10 Populate and verify worksheets for SW laterals: SWlat_IDMap (4 worksheets)
Go to #Step Step 5.11. Generate Location XML-files
...