...
Using the properties element in the combined Wanda adapter configuration, it is possible to directly set properties of the Wanda model, typically using the following property keys:
| Key | description |
|---|---|
| Time step | Time step in seconds (float) |
| Atmospheric pressure | Atmospheric pressure (float) |
| Vapour pressure | Vapour pressure (float) |
| Rheology type | "Newtonian" or "Slurry" (string) or 1 or 2 respectively (float) |
| Density | Density of the liquid (float) |
| Bulk modulus | Bulk modulus of the liquid (float) |
| Kinematic viscosity | Kinematic viscosity of the Liquid (float) |
| Visc. Coeff K in H-B model | For slurry model (float) |
| Exponent n in H-B model | For slurry model (float) |
Exception handling
Some of the exceptions that may occur during processing are logged as warnings in the configured diagnostics file without aborting the adapter processing.:
...
In addition to these properties, that provide specific information for the operation of the Wanda Adapter, it is also possible to set general properties of the Wanda model by defining the property name as key and a float, int or string type value. (see the table provided earlier
| Expand | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||
|
| Key | description |
|---|---|
| Time step | Time step in seconds (float) |
| Atmospheric pressure | Atmospheric pressure (float) |
| Vapour pressure | Vapour pressure (float) |
| Rheology type | "Newtonian" or "Slurry" (string) or 1 or 2 respectively (float) |
| Density | Density of the liquid (float) |
| Bulk modulus | Bulk modulus of the liquid (float) |
| Kinematic viscosity | Kinematic viscosity of the Liquid (float) |
| Visc. Coeff K in H-B model | For slurry model (float) |
| Exponent n in H-B model | For slurry model (float) |
ExecuteActivities Section
...