D-Flow Slide is developed Slide has been developed specifically for geotechnical engineers. It is a tool to perform a (semi-probabilistic) global and (probabilistic) detailed safety assessment on flow sliding in submerged slopes in front of flood defencesdefenses. Moreover, it includes two advanced calculation models for analyzing static liquefaction and breach flow, that can be used for a tailor-made safety assessment, if the global and detailed assessments fail.
The graphical interfaces requires require just a short training period, allowing users to focus their skill directly on the input of the geotechnical data and the subsequent evaluation of the calculated results.
Please double check always
| Info | ||
|---|---|---|
| ||
Please check your input data |
...
carefully and |
...
discuss the results with |
...
Dick Mastbergen |
...
or Geeralt van den Ham |
...
, experts on flow slides |
In this paragraph the next pages, step for step the major input screens and windows are explained on the basis of a a simple Tutorial (bm-1-1).
After this, the advanced models are explained in a few steps.
The input file can also be downloaded , if and used if you have a legal version of the program.
Main Window: The Cross Section of the problem
All input windows can be found at the Menu bar.
Project contains all input windows for the different models. Only the soil parameters per layer has to be added in the Soil table
By Default only the Global and Detailed models are used. Depending on the selected models, 3 charts (2 global and 1 detailed) or 4,5 charts (Static liquefaction and/or Breach flow) are shown. In this tutorial we start with the three standard models
The Soil table for the Global and Detailed models (check the filter) contains several parameters.
The description of all these parameters can be found on the page Input parameters.
Add a surface line with the charateristic point, as shown in this table. They have to be in this order!
Make a soilprofile by using de soillayers from the Soil Table.
Add some additional parameters for the models
The detailed model needs some extra parameters.
When all parameters have been inserted, you can start the calculation.
If one of the parameters are out of range, a validation message will be given in the table window
When no errors are found, the results are presented. In this case both the global and the detailed model fail.
The global results:
The detailed results can be found in two different windows:
The advanced models.
In case the global and detailed models both fail, we can perform an advanced analysis with the advanced models for static liquefaction and/or breach flow.
Select the Advanced models for static liquefaction (Sliq2D) and breach flow (HMBreach) at Project Info and 5 Charts will be shown.
Check the addional soil table parameters for liquefaction:
Check the addional soil table parameters for breach flow:
Additional parameters for liquefaction
Additional parameters for breach flow
Restart the calculation. In this case the advanced models indicate no failure of the embankment (both are green).
Download the file of this tutorial to check your legal version.
...
a well defined problem with a number of characteristic points