Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

BwNReport_SetupInteractiveDredgePlanningTool (1).pdf

 

Live Template
templateHome and search

Background Color
color#D3E4A0
class#D3E4A0

Live Template
templateHeader Toolbox

Space Breadcrumbs
Live Template
templateLogin Code


MapTable for interactive decision support

MapTable assists decision makers, project developers and stakeholders during the entire design process of construction works. The concept allows for quick evaluation in the early stages of the project definition phase to align objectives and visualize possible problems and solutions. During project implementation MapTable can assist in the development of mutual understanding of all project aspects.

Toggle Cloak
exclusivetrue
 Read more

Cloak

 

MapTable is an interactive concept and consists of both hardware and software. The hardware is a computer, a design table (see figure), to assist for instance in the spatial planning process. This tool description does not deal with the hardware tool, but focuses only on the MapTable concept and software tools.

The MapTable concept was developed within the Building with Nature programme to facilitate alternative solutions and predict likely effects of different solutions

Interactive group modelling (MapTable)

Section
bordertrue


Column
width100%

Type: Hardware and Software

Project Phase: Initiation, Planning and Design

Purpose: Allowing for interactive modelling with a group (eg. stakeholder meetings) on digital design tables

Requirements: Knowledge on modelling tool that is applied on MapTable

Relevant Software: Compatible modelling tools


 

 

Float
sideright

Image Added

About

The term MapTable refers to both hardware and software that function as a design and decision-support tool. The MapTable hardware consists of a large, potable touch-screen design table  that can be used as an instrument in spatial planning processes. MapTable software is an umbrella term for software that is suitable for use together with a digital design table. MapTables can be used for interactive design processes with stakeholders, and can assist in visualising potential problems and solutions. This tool page focuses on explaining the MapTable concept and software, including spatial databases and models that can predict impacts of designs of construction works for these projects.

Toggle Cloak
exclusivetrue
 Read more

 

Cloak

Purpose

The purpose of MapTable is to help identify and quickly evaluate design alternatives in an interactive setting, for instance during a meeting or workshop. The concept was designed for an interactive setting, where multiple stakeholders with different backgrounds jointly brainstorm to come up with alternative solutions and out-of-the-box ideas. In such a setting, quick evaluation of alternatives can support the interactive design process and decision-making on an integrated solution.

To apply the MapTable concept one requires three basic needs:
a) a set of routines (i.e. Matlab routines);
b) a database of local conditions and
c) a predictive model.
Together it forms a tool application. It needs to be well prepared, linked and tested before it can be used in an interactive design session.
This tool page is developed for decision makers and discussion leaders to support the use of the MapTable concept in their projects. Therefore we assume that a tool application is available and can be used directly in an interactive session. Tips and tricks for developers to modify an existing tool application or develop a new tool application are provided briefly hereafter.

Context, purpose and results

Context

The MapTable concept is developed to align ideas and to provide a common base for all stakeholders. The concept was developed by the Building with Nature project team with the belief that mutual understanding of what works best and what doesn’t work, leads to the best project result.

The concept is applicable in all design and planning phases of a project. At the beginning of the design process, flexibility is large and costs to adapt a design are relatively low. MapTable concept and tools are suitable to use in an interactive group session with multiple stakeholders and serves as a communication tool. MapTable software tools are especially suitable in spatial evaluations and studies: distinct design aspects and spatial effects can be visualised easily with one tool. It stimulates discussion between specialists in different fields of expertise about aspects of design alternatives.

Purpose

The purpose of MapTable is to help identify and quickly evaluate design alternatives in an interactive setting, for instance during a meeting or workshopDuring a meeting or workshop all participants are encouraged to take part in the design process to achieve the best possible alternative. It serves as a useful communication tool for involving stakeholders.

 

The MapTable concept is applicable in a wide range of projects. The concept, as it was developed, aims at projects related to hydrodynamics, morphology and ecology and their interrelations. An interactive tool developed for the MapTable concept can visualise geographic changes in, for example, a coastal zone, an estuary or a river bed. Within a very short time (a few minutes at most), a first estimate of the effects on various design aspects is delivered. New insights or ideas can thus be quickly evaluated and results presented on the spot. The interactive tool is based on simple but robust models that allow for quick evaluation of different design alternatives. Making use of simple models is both an advantage (quick, interactive) and a drawback (less accurate). Results of a session are preferably verified with more detailed models and further analysis before final decisions are made.

Results

MapTable facilitates in the process of getting to mutual agreement among various stakeholders with regard to the various aspects of the design. Within the Building with Nature project the MapTable concept was made operational for several case studies. For each case a new tool was developed. Understandingly each tool provides different technical results  

To apply the MapTable concept one requires three basic inputs:
a) a set of routines (i.e. coastal interventions, dredging schemes). Results can be used for further study and for verification, for instance with more detailed models.

Usage skills

Various skills and background knowledge are required depending on the chosen setting and purpose. For a good interpretation of the results, the user should have basic knowledge of the different fields called upon in the tool.

To setup a new model application within an existing tool for a different geographical location an experienced specialist is needed. This is only required when an existing tool will be used.

In case the tool is used in a workshop or during a stakeholder meeting, a facilitator is required with basic skills in hydrodynamics and morphology to translate and interpret results for the group. An experienced facilitator can also synthesize, conceptualize and translate group ideas to sketches to be used in the tool.

Matlab routines);
b) a database of local conditions and
c) a predictive model.


Together it forms a tool application. It needs to be well prepared, linked and tested before it can be used in an interactive design session. This tool page is developed for decision-makers and discussion leaders to support the use of the MapTable concept in their projects. Therefore we assume that a tool application is available and can be used directly in an interactive session. Tips and tricks for developers to modify an existing tool application or develop a new tool application are provided briefly hereafter.

 

Building with Nature interest

Within a Building with Nature development it is always a challenge to bring different parties and knowledge fields together, to develop new ideas in cooperation with multiple stakeholders with various backgrounds and to synthesize synthesise group ideas. The BwN approach aims to come up with eco-friendly and eco-dynamic developments and designs. Visualisations can assist to clarify the Building with Nature concepts. 
Building with Nature invites stakeholders to Stakeholders are invited to become part of the design process. Furthermore, visualisations serve as a tool to where visualisations can assist to clarify the BwN concepts, stimulate communication and gain attention of all stakeholders and from additional stakeholders as well as the broader public.

The MapTable concept facilitates alternative solutions and predict likely effects of different solutions. The concept was designed for an interactive setting where multiple stakeholders with different backgrounds jointly brainstorm to come up with alternative solutions and out-of-the-box ideas. In such a setting quick evaluation of alternatives can support the interactive design process and decision-making on an integrated solution.

Project application

The MapTable concept is applicable in a wide range of projects. The concept, as it was developed, aims at projects related to hydrodynamics, morphology and ecology and their interrelations.

Project

 

Project phases

The MapTable concept can in principle be applied in all project phases:
I. Initiation phase: to develop and evaluate alternative visions on a project area.
II. Planning & design phase: to develop and evaluate alternative solutions for a well defined problem.
III. Construction phase: to evaluate alternative construction methods.
IV. Operation & Maintenance phase: to evaluate alternative maintenance methods.

However, a specific tool can be designed for a specific project phase and might therefore not be directly applicable in a different phase.

 

How to Use

Design challenges are often multi disciplinary and involve a multitude of stakeholders. To facilitate in this process the MapTable concept was developed by the Buildinng with Nature project team. For four different design challenges (see below) the MapTable concept has been applied resulting in four practical tool applications (see Practical Applications). These tool applications are specified for different geographical locations.

For the MapTable concept a Graphical User Interface (GUI) -layer was developed to guide the user through the tool. The GUI-layer enables the user to change input parameters for each tool and model so that various design alternatives can be evaluated.Various skills and background knowledge are required depending on the chosen setting and purpose. For a good interpretation of the results, the user should have basic knowledge of the different fields called upon in the tool. To setup a new model application within an existing tool for a different geographical location, an experienced specialist is needed. In case the tool is used in a workshop or during a stakeholder meeting, a facilitator is required with basic skills in hydrodynamics and morphology to translate and interpret results for the group.

Toggle Cloak
exclusivetrue
idmaptable_htu
 Read more

Cloak

 

Experience with the tool applications has shown several important aspects to be considered when 1) using a tool application i.e. in a workshop setting and 2) developing a new tool application. In this section a brief overview is given of a) the required skills and capacities and b) of the process steps when using or developing a tool application.

This page is primarily written for users of MapTable tool applications. Basic directions are provided to use a tool application as a means for communication in an interactive design session.
For cases where existing tool applications cannot be used or have to be modified, tips and tricks for a developer are provided.

 

Cloak
idmaptable_htu

Requirements

To run an interactive design session you need:


a) MapTable software;
b) a database of local conditions (depends on the tool);
c) a predictive model.


All these requirements need to be well prepared, linked and tested. Such combination is suitable to study one specific design issue at one location.

 

Applications

Using a tool application in a workshop setting or developing a new tool application, requires basic skills and capacities of the user or user group. The requirements depend largely on the preferred level of adaptation of the tool application. A case can be developed based on:

  1. current tool applications, where no adaptation of the tool application is required;
  2. current tool applications in a different geographical setting, where the existing tool application will be adapted to meet the new geographical settings; and
  3. a new tool application.

Important note. Cases and tool applications can be developed to address a specific problem for a specific geographical area. Prior to a workshop, these tool applications have to be modified or developed. Modification of a tool application or the development of a new tool application, including adequate testing, might take a significant amount of time. Requirements are listed in the tables below. Listed requirements for level 1 case development are also required for levels 2 and 3, and requirements for level 2 are also required for level 3 case development.

Table 1.  

Required skills and capacity

Case development

Required capacity

1. Existing tool existing geographical location

Facilitator
Basic knowledge of hydrology, morphology and ecology
Modelling experience
Basic experience with contracting in a marine environment

2. Existing tool, different geographical location

Hydrodynamic modeling experience

3. New tool development

Programmer with experience with MatLab, Python, JavaScript, XML

Table 2.  

Technical requirements

Case development

Required software

Required hardware

1. Existing tool application, existing geographical location

Web browser, GoogleEarth plug-in

Computer with internet connection (for GoogleEarth)
visualiser (i.e. beamer, screen)

2. Existing tool application, different geographical location

Hydrodynamic model (Delft3D, SOBEK, ...), MatLab •• , OpenEarth Tools
Pythonxy (for testing)

 

3. New tool

MatLab •• , OpenEarth Tools, Pythonxy (for developing)

 

 for some model packages a license might be required
•• or these software packages a license is required


Phased plan process

Essential before application

To start the process one shall define the design challenge as clear as possible, and the goal shall be set with a clear ambition. Then it can be determined which tool can be used to help solve the facing challenges.
You might conclude that an existing tool is not ready for your location, or that there is no existing tool you can use. Please then follow the steps explained in the next section. The same sequence is used as above to describe the cases.

 

Existing tool application, existing geographical location.

The following approach is followed after the used in the case that a tool is developed and applicable for the geographical area of interest, and is used applied as a means for communication in an interactive workshop setting with the various stakeholders. The presented steps are followed in the interactive workshop setting.Step 1.

 

Step 1: Start with a kick-off meeting where all stakeholders are present. During this kick-off meeting the problem analysis should be presented and the aim of the session be made clearclarified. A demonstration of the MapTable tool will familiarise the participants with the tool and indicate what input is required of the participantsfrom them.
When the participants are familiar with the tool, a draft inventory of requirements and wishes regarding the final result can be made. During this step, the meeting should agree when design requirements are met should be discussed (i.e. maximum allowed ecological impact is met when the impact is everywhere below a value of ‘3’); this might lead to a required small . This might result into small required adaptation of the tool settings on the spot.

 

Step 2.
: In a second step the stakeholders start brainstorming on possible solutions and intervention concepts. Alternative solutions should be discussed. The result The aim of this step is to collect a set of viable alternatives where all stakeholders agree upon and to be assessed/evaluated alternative solutions that the stakeholders are willing to assess and compare, using the MapTable tool application.

 

Step 3.
: The resulting alternatives will now be modeled modelled and evaluated with MapTable. This again will probably lead to small changes in the alternativesDuring this process, some small adjustments may be made to the different designs. The results will be discussed with the stakeholders and the best solution chosenwill be jointly decided upon. This can be done performed with the use of the selection method as defined in step 1.

 

Step 4.
: For the final solution a detailed design can now be made and carried forward. When If required, more detailed models can be used applied to determine the effects with more of the proposed design with a higher accuracy. The results of the MapTable tool applications can be used as input for the detailed designmodelsdesign models.

 

Existing tool application, different geographical location.

When the project can be studied by using an existing toolIn the case that a tool with the desired purpose already exists, but the geographical location of your project has not been modelled, the tool has to be adapted . Basically, this will mean that the spatial data before it can be applied in a workshop. This means that spatial data needs to be obtained from other sources (e.g. models) needs to be developed for this model. These steps you shall be followed prior to a workshop can be given. and be prepared according to the input requirements for the chosen model. One shall be aware that these steps might consume a significant amount of time. For documentation refer to the


Step 1.
: Develop a hydrodynamic numerical model for the area of interest. Validate and calibrate the model.


Step 2.
: Develop the hydrodynamic and morphological database. Hereto documentation as provided here (link where to?) can be used.


Step 3

.

: Develop an ecological (response) database.

Hereto documentation as provided here (link where to?) can be used.

 


Step 4
: Adjust the user settings in the tool as required. Some response settings might have to be changed to meet match the local conditions.

 

New tool application.

In case If no existing tool applications is suitable for application on the case studiedat hand, a new tool application can be developed following the MapTable concept, in such a way that it is still compatible with the general MapTable concept. To develop a new tool application, the developer needs to have experience with the programming tools as listed above. For the MapTable concept, a flexible interface (a GUI) was designed such that in principle any other tool can be plugged ininto it. To develop your own tool, you can follow the following steps below:


Step 1.
: Define the required result and user input. What result should the tool provide? What switches and controls should be available to the user?


Step 2.
: Define the physical processes and determine how they interact. Develop a workflow and determine the required modules. Check what existing which modules from existing MapTable tool applications tools can be used.


Step 3.
: Develop the tools and draft the required databases. A step-by-step approach to fill the databases is provided here (link where to?); this should not be completed at this moment yet (???).in the handbook.  


Step 4.
: Test the tool and draft databases. This might result in required changes. Upon completion the databases can be filled and completed and the , and make amendments where necessary. Once finalised, the tool can be used as described in the other step-by-step approaches.

 

Practical Applications

  1. Interactive Design Tool - Holland Coast
  2. Interactive River tool
  3. Interactive Dredge Planning tool

  4. Interactive O&M tool: Streamline tool

Toggle Cloak
exclusivetrue
idmaptable_pa
 Read more

 

Interactive
Cloak
idmaptable_pa

1. Interactive Tool Coastal Intervention: application Holland Coast

An interactive design tool has been developed to get an indicative insight in effects of measures on long term coastline development. The tool was developed for the Dutch sandy coast, the Holland Coast. A coastline model (in which the various hydrodynamic processes are numerically modelled) has been developed and linked to a web viewer for the Holland Coast. Mega nourishments, maintenance nourishments, groynes and revetments can be drawn in a map in this web viewer. Thereafter, the coastline model computes the indicative effects of these measures on coastline development in a few minutes. All stakeholders can see the effects of their design ideas directly in the web viewer.


In Coastal Workshop sessions with multiple stakeholders, this interactive tool has been used to support the development of alternative visions for the Holland Coast in 2100.

The application of the MapTable concept and tool application in this setting has resulted in:


  • a fast and plausible estimate of morphological effects of various coastal interventions;
  • interactive visualization of results by presentation using Google Earth.


During the sessions it was learned that participants were very keen to participate in the interactive process. They were motivated to come up with various alternatives and to understand the processes and resulting effects.
More information on the tool application can be found on the page of the . Practical tips and tricks and how to use a tool in an interactive setting can be found .


2. Interactive River tool: application Dutch Rivers

.

MapTable tool applications have proven its use in several Dutch ‘Make Room for the River’ projects. During meetings with stakeholders, effects of measures, like a side channel, a floodplain excavation and relocation of levees, have been estimated with the help of MapTable. For these projects, the hydrodynamic model WAQUA was plugged into the MapTable tool application.


This MapTable tool application has been developed by Deltares and Meander, commissioned by Rijkswaterstaat. More information can be found in the user manual and in the audit report (Dutch only).


3. Interactive Dredge Planning tool: application Singapore

.

Nowadays static dredging criteria are used to avoid ecological damage. Aim of this study was to use ecologically relevant criteria instead of static dredging criteria for the assessment of dredging activities. Therefore, a dredge plume modelling tool has been developed for the waters around Singapore. This tool can make rapid assessments on the effects of dredging operations on vulnerable coastal ecology. A dredging operation can be planned on a digital map and users can specify the characteristics of this dredging operation. The tool will make a quick assessment of the expected plume dispersion and stressor intensity at relevant locations. Furthermore, this stressor can be translated into an expected effect on ecology by adding others tools on Species Responses (e.g. for seagrass) . Users can optimise their proposed dredging operation based on this quick assessment of the ecological impact.


More information can be found on the Tool page of the . A tutorial on the use and a guideline about the setup of the Interactive Dredging Tool are under development.


4. Interactive O&M tool: Streamline tool

The aim of the Stroomlijn project is to optimise the maintenance of floodplain vegetation, because high vegetation can affect extreme water levels in rivers. A MapTable tool application has been applied to evaluate maintenance strategies in this project.

References

Toggle Cloak
exclusivetrue
 Read more

Cloak

Suggestions for further reading about MapTable software:

  • EcoShape (2012)Interactive Dredging Tool, tutorial. Dordrecht (the Netherlands) - in preparation. EcoShape (2012), Setup Interactive Dredging Tool, Dredge Planning Tool, setup and guideline. Dordrecht (the Netherlands) in preparation
  • Werf ten Bosch (2009), J. van de. MapTable 2.0 Help, gebruikershandleiding en technische documentatie bij MapTable versie 2.0. Meander Advies en Onderzoek. (In Dutch)

 

 

 

Live Template
templateBnW_Footer
typetemplate

Live Template
templateBack-To-Top Button