This is a draft page
...
Introduction & summary
In this tool (wave penetration) you can compute wave penetration patterns travelling into a harbour basin.
The tool requires a shoreline and 2 breakwaters attached to shore (you can inspect the generic data availability in the top panel of the tool).
Optionally, any generic wave data can also be used, in order to fill the wave condition fields.
Wave penetration can be calculated in two ways, depending on the user preference. Using an analytic method, in which wave panatration is computed on a grid within the harbour basin and is based on Cornu spiral waves propagating into the harbour basin.
Note that this does not take into account processes such as reflection and diffraction.
Results Besides, also a numerical method can be selected, which uses the Diffrac2DH schemisation to find the penetration patterns of waves entering the harbour basin. This method takes reflection and diffraction into account. Results of wave penetration should therefore however be interpreted with a considerable range of uncertainty.
How to use the tool
Text
Examples
Text
- Open a new project.
- Start in Generic Data by defining a Coastline, two breakwater structures (which enclose the harbour basin) and a wave climate and/or extreme waves (optional). Make sure that the coastline and the breakwaters intersect.
- Open the Wave Penetration tool
User input fields
Wave condition
Provide the design wave conditions at the haror entrance. By clicking on the (
) button, you can also select the wave climate and/or extreme wave conditions from the generic data.
| Default Value | Unit | Min. | Max. | Brief Description | |
|---|---|---|---|---|---|
| Hs | 0 | m | 0 | 20 | Significant wave height at the harbor entrance. |
| Tp | 0 | s | 0 | 20 | Peak wave period at the harbor entrance. |
| Dir | 0 | deg N | 0 | 360 | Direction of the waves approaching the harbor entrance (Nautical convention). |
| Dir spreak | 30 | deg | - | - | Directional spreading at the harbor entrance. This option is not yet supported. |
Structures
Select the first and second breakwater which enclose the harbor basin. Only a harbor basin comprising of 2 breakwaters is supported.
Harbor
| Default Value | Unit | Min. | Max. | Brief Description | |
|---|---|---|---|---|---|
| Harbor depth | 10 | m | 0.01 | 9999 | Water depth inside the harbor. |
Calculation type
Select which type of calculation will be performed:
- Analytical - Wave penetration is computed on a grid within the harbour basin and is based on Cornu spiral waves propagating into the harbour basin. Note that this does not take into account processes such as reflection and diffraction.
- Diffrac2DH - Wave penetration is computed using the numerical Diffrac2DH schemisation. This method takes reflection and diffraction into account.
Tool limitations
Example cases
The following files (.dsproject) can be downloaded and loaded into CoDeS to serve as examples. They are not based on actual projects, but are intended as illustration.
Unzip the files to an convient folder (but make sure the file structure does not change), and open the .dsproject file from within CoDeS.More information will follow