The description of these parameters can be found on the page Input parameters.

Add some additional parameters for the models.	The detailed model needs some extra parameters. The probabilistic parameters are fixed, Only the Mean "Area ratio" can be changed.

When all parameters have been inserted, you can start the calculation.

If one of the parameters are out of range, a validation  message will be given in the table window

When no errors are found, the results are presented. In this case both the global and the detailed model fail.

In this case both standard models fail and the user have to use the advanced models.

The global results:

The detailed results can be found in two different windows:

The advanced models.

In case the global and detailed models both fail, we have to perform an analysis with the advanced models for static liquefaction and/or breach flow.

 Select the Advanced  models for static liquefaction (Sliq2D) and breach flow (HMBreach) at Project Info and 5 Charts will be shown.
   

Check the addional soil table parameters for liquefaction: (Set the filter in the soil table on Advanced Liquefaction)

Check the addional soil table parameters for breach flow: (Set the filter in the soil table on Advanced Breaching)

Additional parameters for liquefaction

Additional parameters for breach flow

Restart the calculation. In this case the advanced models indicate no failure of the embankment (both are green).

Download the file of this tutorial to check your legal version.