Smoketest VE

The required files are in the folder BatchRunsForSmoketests/nwm_VE_smoketest. Perform the following steps:

1. Upload via the Configuration Manager link to config manager (CM) the locationSets.xml (see folder nwm_VE_smoketest); this file is located under RegionConfigFiles; Provide a description, that this location set is used for smoketest (see Figure 1); this location set is just a temporary one for the smoketests.
   
   
   Figure 1: Upload via locationSets.xml via Configuration Manager (CM)
   
   
2. Start Client (OC)
3. Open Starten workflow; push button Voorbereide taak uitvoeren...; go to folder nwm_VE_smoketest and select one .xml file starting by number one (see Figure 2).
   
   
   Figure 2: Start batch runs
   
   After the all runs of the selected batch run are finished (check Systeembeheer->Draaiende taken, see Figure 3)), continue with the next file-number.
   
   
   Figure 3: Check if batch runs are completed
   
   

4. The batch-runs contain (REF2015/WS2085) the following runs (see Table 1)

   Table 1: Smoketest batch runs for VE

   Name	Description	Expected  run time
   1_NWM_smoketest_VE_Import.xml	All import workflows for all regions	< 1 min
   2_NWM_smoketest_VE_Hydrodynamic_update.xml	The hydrodynamic update runs for IJVD  (WAQUA) and RMM (Sobek)	< 1 h
   3_NWM_smoketest_VE_Hydrodynamic.xml	The hydrodynamic forecast runs for IJVD, Rijn, Maas  ( all WAQUA) and RMM (Sobek) with reduced forecast time	< 2 h
   4_NWM_smoketest_VE_PPHydrodynamic.xml	The processioning runs for the WAQUA calculations of IJVD, Rijn, Maas	< 5 min
   5_NWM_smoketest_VE_HydraZoet.xml	The HydraZoet runs for IJVD, Rijn, Maas, RMM for a reduced location set (2 locations Rijn, Maas, RMM and 4 location IJVD) and Markermeer and IJsselmeer (all locations)	< 15 min
   6_NWM_smoketest_VE_PPHydraZoet.xml	he postprocessing of the HydraZoet runs for a reduced  location set (2 locations Rijn, Maas, RMM and 4 location IJVD)  and Markermeer and IJsselmeer (all locations)	< 5 min

   
   

5. After finishing the smoketest re-upload via the Configuration Manager (CM) the locationSets.xml, which is provided in the Configuration under RegionConfigFiles; this file contains the full locations set again for further calculation

The generated data have a expiry time of 7 days. If you want to delete them before, perform following steps (see Figure 4):

1. Open in OC Management Modelruns; go to tab Verlooptijdstip vorspelling
2. Mark the model runs which should be deleted, e.g. gebruiker smoketest_batch
3. Push button Verwijderen

In the next rolling barrel run, the model runs will be deleted from database.

Figure 4: Delete batch runs from database

Smoketest ZW

The required files are in the folder BatchRunsForSmoketests/nwm_ZW_smoketest. Perform the following steps:

1. Start Client (OC)
2. Open Starten workflow; push button Voorbereide taak uitvoeren...; go to folder nwm_ZW_smoketest and select one .xml file starting by number one (see Figure 2). 

The batch-runs contain (REF2015/WS2085) the following runs (see Table 2)

Table 2: Smoketest batch runs for ZW

The generated data have a expiry time of ??? days. If you want to delete them before, perform following steps (see Figure 4):

1. Open in OC Management Modelruns; go to tab Verlooptijdstip vorspelling
2. Mark the model runs which should be deleted, e.g. gebruiker smoketest_batch
3. Push button Verwijderen