Skip to end of metadata
Go to start of metadata

Delft3D Flexible Mesh GUI

Version: 2020.03 (1.6.2.?????)

Key changes: 

  1. D-RTC: Mathematical Expressions

  2. D-Waves: Domain specific settings

  3. D-Waves: Totally different Spatially Varying boundaries
  4. D-Waves: Running via DIMR

Known problems:

  • When grid has a very high resolution it may look distorted. This problem is related to a specific rendering we are using. We have currently improved that for our grids but still need to extend it to other components (points, polygons) before making it a default for our users
  • We do not fully support 4k screens. We have improved some screens but it is not yet fully supported (e.g. Boundary Conditions Screens, Charts are still in the old Windows Forms format)
  • When running a model with the D-Real Time Control you may encounter situation where your simulation will "endlessly"run. It is due to lack of error communication from computational core and proper parsing it in our User Interface. When such a situation happen you should stop the simulation and either inspect your diagnostic files or run it outside the User Interface for a proper error report.
  • D-Waves: Domain specific settings are NOT implemented in the new version of our software. You may encounter problems or differences in the D-Waves models when importing and exporting models with more than one domain.

Compatibility: 

Solved issues:


 


DIMR

Version: 2.00.00.65980, Feb 13 2020, DIMRset: 2.10.10_65673, Feb 14 2020

Key changes: None

Known problems: None

Compatibility: None

Solved issues: 

Key Summary T Created Updated Due Assignee Reporter P Status Resolution
Loading...
Refresh

 


D-Flow 1D, D-Flow 1D2D

Version: 

  • D-Flow 1D Version: 5.00.024.65651, Feb 13 2020

  • FLOW1D2D Version: 1.00.00.65651, Feb 13 2020

Key changes:

Known problems:

Compatibility: 

Solved issues:

 

 


D-Flow Flexible Mesh

Version: 1.2.94.65980, Feb 13 2020

Key changes:

Known problems:

    • UNST-3263 D-Flow FM model does not run when sample set is located on top of faces
      (warning) When having a samples that are just above cell centers interpolation is not working ok. This causes problems in User Interface but also makes it impossible to run triangular grid in computational core.

Compatibility: 

Solved issues:

 


D-Morphology

Version: same as D-Flow FM

Key changes:

Known problems:

Compatibility: 

Solved issues:

 

 


D-Real Time Control

Version: 1.6.1.1183, Jan 24 2020

Key changes:

Known problems:

Compatibility: 

Solved issues:

 


D-Rainfall Runoff

Version: 3.216.37.65651, Feb 13 2020

Key changes:

Known problems:

Compatibility: 

Solved issues: 


 


D-Water Quality

Version: 5.10.00.65980, Feb 13 2020

Key changes:

  • Further integration of the water quality library into D-Flow FM.
  • Corrections in coupling algorithm in D-Flow FM, several problems regarding the volume balance corrected.
  • Convergence problems with integration option 24 solved by avoiding zero volumes.
  • Correction in the calculation of the local depth in case of z-layers.
  • Improvements in the netCDF output from D-Water Quality.

Known problems:

Common theme:

Align netCDF output from D-Water Quality with the output from D-Flow with water quality processes


(Known issues - label waq_knownissue_2020_03 - Jira does not seem to understand)

Compatibility: 

Solved issues:

 

Key Summary T Created Updated Due Assignee Reporter P Status Resolution
Loading...
Refresh


D-Waves

Version: 3.08.00.65980, Feb 13 2020

Key changes: None

Known problems: None

Compatibility: None

Solved issues:  

Key Summary T Created Updated Due Assignee Reporter P Status Resolution
Loading...
Refresh


 


DIDO

Version: 

Key changes:

Known problems:

Compatibility: 

Solved issues:



RGFGRID

Version: 

Key changes:

Known problems:

Compatibility: 

Solved issues:

 

 

 


QUICKPLOT

Version: 

Key changes:

Known problems: 

Compatibility: 

Solved issues:

  • No labels