There is a clear demand from the oil and gas industry to include process based forward models such as Delft3D in their workflow for geological applications. However, the Delft3D model engine and interfacing is designed for experienced hydrodynamic and morphological modellers and is therefore in its present form not optimised for the workflow of geologists in the oil and gas industry. Therefore, Statoil, Deltares and the TU Delft jointly started the development of Delft3D Geological Tool (Delft3D-GT), a comprehensive web-based software application that facilitates the set-up of geometrically simple Delft3D models and only provides input parameters relevant for geological use. It combines the advanced morphodynamic and hydrodynamic modules of Delft3D with a unique open-source database, DATALAB, a user-friendly web-interface GUI, online data management and analysis tools. Delft3D-GT offers geologist and engineers the opportunity to intuitively simulate, analyse and export 3D numerical reservoir analogues to existing reservoir model such as RMS, Jewel Suite, and Petrel. Delft3D-GT will be open source.
What are the advantages of Delft3D subsurface characterization?
1) OPEN-SOURCE: extraction of subsurface properties and geometries from a large and variegate dataset of fluvio-deltaic, high-resolution, 3D numerical analogues, will lead to better prediction of heterogeneity and connectivity in reservoirs.
2) EXPERIMENTAL: the control on the boundary conditions, such as hydrodynamic processes and grain size, will allow testing of hypothesis and quantifying uncertainty on deltaic development by generating and analyzing different scenarios.
3) INTEGRATION: the connection with existing reservoir software enables an optimal integration of numerical analogues in the reservoir characterization workflow.
4) EASY: an intuitive interface, and predefined model setup will enable non-expert to prepare model input and analyze model output.
5) SUPPORT: technical and operational support will be provided for setup and application of the Delft3D GEO-TOOL to specific assets.
For the development of Delft3D-GT – the Dutch Ministry of Economic Affairs provides a subsidy from TKI funds (“Top consortium Knowledge and Innovation”). With this subsidy the development of Delft3D-GT can be further stimulated with additional research activities to improve the knowledge base, the software and its dissemination.
As a part of the joint development of Delft3D-GT, Statoil and Deltares agreed to work on the following topics specifically supported by the TKI-subsidy:
- Establish a link between Delft3D-GT and the SAFARI database (http://safaridb.com/#/)
- Develop a 3D web viewer to inspect output of Delft3D-GT
- Investigate the integration of Delft3D-FM into Delft3D-GT
- Investigate the implementation of a consolidation module in Delft3D-GT
Deliverable 1: Establish a link between Delft3D-GT and SAFARI (software)
Rationale
SAFARI is a database containing outcrop information for reservoir modelling (see http://safaridb.com/#/). Currently, the database consists of outcrop, seismic and modern data. Synthetic data of geological realizations based on process based (Delft3D) simulations is currently lacking in this database. It is believed that adding output of Delft3D-GT to the SARARI database will result in added value for the geologists in the oil and gas industry. Therefore, a link needs to be established between Delft3D-GT and SAFARI.
Approach
As a first step the output of Delft3D-GT will be exported to the SAFAR database (labelled as “synthetic data”). This will be a one way coupling. Hence, Delft3D-GT output can be exported to SAFARI, but not the other way around. The SAFARI export format and the geological quantities to be stored in the database need to be provided by the SAFARI developers (Uni Research Centre for Integrated Petroleum Research - CIPRand University of Aberdeen – UoA). Furthermore, a protocol needs to be developed for uploading/updating Delft3D-GT output in SAFARI.
Deliverable 2: Develop a 3D web viewer to inspect output of Delft3D-GT (software)
Rationale
In the present design of Delft3D-GT output visualization will be limited to 2DH or 2DV. A simple 3D web viewer would be of great help to geological engineers to inspect the “complete picture” of the subsurface. This viewer is intended for first assessments/inspections of Delft3D-GT output only. For detailed 3D geological inspections the oil and gas industry already has several stand-alone applications available. The 3D viewer still has to be developed from scratch. In a later stage this viewer can potentially be linked to SAFARI as well (not scope of this work plan).
Approach
The 3D web viewer will focus on 3D visualization of the subsurface (e.g. sediment properties), which is changing in time. Furthermore, the viewer should allow the user to inspect 2DV cross-sectional slice of the subsurface in time. As a first step an inventory of the user requirements will be made. Subsequently, the viewer will be implemented step-by-step with involvement of Statoil staff to check whether the functionality meets the end-user needs. The development of the viewer is subcontracted to the SAFARI developers (CIPR and UoA). The viewer will be integrated in Delft3D-GT at the end of 2016.
Deliverable 3: Investigate the integration of Delft3D-FM into Delft3D-GT (report and software)
Rationale
In the present design of Deflt3D-GT the Delft3D 4 engine is used as the computational core. Currently, Delft3D Flexible Mesh (FM), the successor of the present computational core, is under development. Whereas Delft3D-FM in its present state cannot yet be a full replacement of the Delft3D 4 computational core, it is expected that it will replace Delft3D 4 in the near future. This requires an update/upgrade of Delft3D-GT including testing and verification.
Approach
As a first step the Delft3D-GT model templates will be converted to Delft3D-FM models. Subsequently, the geological realizations obtained from the Delft3D-FM models will be compared to the results from Delft3D (V4; the latest structured grid model version). Based on this comparison, further analysis and bug fixing may be required. This will result in a short report. When the Delft3D-FM is considered to be an appropriate replacement for the Delft3D 4 computational core, it will be integrated into Delft3D-GT. This mainly requires updating of the pre- and post-processing scripts of Delft3D-GT to align it with the in- and output files of Delft3D-FM. No major changes in the General User Interface of Delft3D-GT are expected
Deliverable 4: Investigate the implementation of a consolidation module in Delft3D-GT (report and software)
Rationale
Consolidation is a relevant process for the development of the subsurface deposits of deltas and, hence, the (synthetic) geological realizations generated by process based models. In the present version of Delft3D-GT consolidation is not accounted for. However, in 2016 Winterwerp and Zhou (in prep.) implemented a consolidation module in the research version of Delft3D. This consolidation module is currently being tested and validated and is expected to become available in the course of 2016. After the performance of this consolidation module on geological time scales is verified, the consolidation module may also be integrated in Delft3D-GT.
Approach
As a first step the validity of the consolidation module on geological time scales needs to be verified. Subsequently, the consolidation module can be used to systematically investigate how consolidation affects delta formation and subsurface deposits. This is mainly a research activity which will result in a report and perhaps even a scientific paper. When the consolidation module is found suitable for geological application, it can be integrated in Delft3D-GT as well.
Planning
The gross planning of the research activities related to the TKI-subsidy is as follows:
- June – Jan 2017: Research topics 1 and 2
- Nov 2016 – Dec 2017: Research topics 3 and 4
- 31 Jan 2017: Milestone 1: status/delivery topics 1 and 2
- 1 Jul 2017: Milestone 2: status topics 3 and 4
- 31 Dec 2017: Milestone 3: delivery final products/reports
The first Delft3D-GT version will be available in the spring of 2017. Deliverables 1 and 2 will be incorporated in this version. Delverables 3 and 4 will be added to Delft3D-GT in new versions which will also be open source.
After the completion of version 1 Deltares will offer a support service for companies to apply it to their specific projects. The technical support involves system set-up and helpdesk service. Scientific and operational support will be offered to companies for either working or collaborating on specific assets.
