Page History

Wiki Markup
{scrollbar

...

Wiki Markup
{TOC}

SWAN pre-adapter

Model pre-adapter for running SWAN (Simulating WAves Nearshore) model from Delft-FEWS.
For information about the SWAN model see http://www.swan.tudelft.nl/

...

In this section general information regarding the module such as version number, file directories, missing values, and time zone information can be specified.

xml

Code Block

	xml
title	general
	xml

<general>
	<description>SWAN model run</description>
	<piVersion>1.8</piVersion>
	<rootDir>%REGION_HOME%/Modules/Swan/$MODEL$</rootDir>
	<workDir>%ROOT_DIR%/workDir</workDir>
	<exportDir>%ROOT_DIR%/input</exportDir>
	<exportDataSetDir>%ROOT_DIR%/</exportDataSetDir>
	<exportIdMap>IdExport_$MODEL$</exportIdMap>
	<importDir>%ROOT_DIR%/workDir</importDir>
	<importIdMap>IdImport_$MODEL$</importIdMap>
	<importUnitConversionsId>ImportUnitConversions</importUnitConversionsId>
	<dumpFileDir>$GA_DUMPFILEDIR$</dumpFileDir>
	<dumpDir>%ROOT_DIR%/diagnostics/</dumpDir>
	<diagnosticFile>%ROOT_DIR%/diagnostics/diagnostics.xml</diagnosticFile>
	<missVal>-999</missVal>
	<timeZone>
		<timeZoneName>GMT+0:00</timeZoneName>
	</timeZone>
</general>

...

It may be useful to clear the model working directory of any previous runs before starting a new run.

xml

Code Block

	xml
title	startUpActivities
	xml

		<startUpActivities>
			<purgeActivity>
				<filter>%ROOT_DIR%/workDir/*</filter>
			</purgeActivity>
		</startUpActivities>

...

The run file contains information regarding the input file names, start and stop times, and time step. Additional properties can be passed using the run file as listed above under Properties.

xml

Code Block

	xml
title	exportActivities
	xml

<exportActivities>
			<exportStateActivity>
				<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
				<stateExportDir>%ROOT_DIR%/stateInput</stateExportDir>
				<stateSelection>
					<warmState>
						<stateSearchPeriod unit="hour" start="-1" end="0"/>
					</warmState>
				</stateSelection>
			</exportStateActivity>
			<exportDataSetActivity>
				<moduleInstanceId>Swan_$MODEL$_$METEO$</moduleInstanceId>
			</exportDataSetActivity>
			<exportNetcdfActivity>
				<exportFile>waterlevel.nc</exportFile>
				<timeSeriesSets>
					<timeSeriesSet>
						<moduleInstanceId>D3D_flow_dcsm5_hirlam72_hc</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>H.simulated</parameterId>
						<locationId>dcsm5</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="hour"/>
						<relativeViewPeriod unit="hour" start="-1" startOverrulable="true" end="0"/>
						<readWriteMode>read only</readWriteMode>
						<synchLevel>2</synchLevel>
					</timeSeriesSet>
				</timeSeriesSets>
			</exportNetcdfActivity>
			<exportNetcdfActivity>
				<exportFile>$METEO$.nc</exportFile>
				<timeSeriesSets>
					<timeSeriesSet>
						<moduleInstanceId>Import_$METEO$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wind.u.simulated</parameterId>
						<locationId>$METEO$_regular</locationId>
						<timeSeriesType>external historical</timeSeriesType>
						<timeStep unit="hour" multiplier="1"/>
						<relativeViewPeriod unit="hour" start="-1" startOverrulable="true" end="0"/>
						<readWriteMode>read only</readWriteMode>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>Import_$METEO$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wind.v.simulated</parameterId>
						<locationId>$METEO$_regular</locationId>
						<timeSeriesType>external historical</timeSeriesType>
						<timeStep unit="hour" multiplier="1"/>
						<relativeViewPeriod unit="hour" start="-1" startOverrulable="true" end="0"/>
						<readWriteMode>read only</readWriteMode>
					</timeSeriesSet>
				</timeSeriesSets>
			</exportNetcdfActivity>
			<exportNetcdfActivity>
				<exportFile>ecmwf_spectra.nc</exportFile>
				<timeSeriesSets>
					<timeSeriesSet>
						<moduleInstanceId>Import_ecmwf_spectra</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.variancedensity2D.simulated</parameterId>
						<domainParameterId>f</domainParameterId>
						<domainParameterId>dir</domainParameterId>
						<locationSetId>ecmwf_spectra.locations</locationSetId>
						<timeSeriesType>external historical</timeSeriesType>
						<timeStep unit="hour" multiplier="6"/>
						<relativeViewPeriod unit="hour" end="0"/>
						<readWriteMode>read only</readWriteMode>
					</timeSeriesSet>
				</timeSeriesSets>
			</exportNetcdfActivity>
			<exportNetcdfRunFileActivity>
				<description>This run file is passed as argument to SwanPreAdapter</description>
				<exportFile>%WORK_DIR%\run_info.nc</exportFile>
				<properties>
					<string key="input_spectra_file_to_convert" value="..\input\ecmwf_spectra.nc"/>
					<string key="template_swan_input_file" value="..\template\template.swn"/>
					<string key="swan_input_file" value="INPUT"/>
				</properties>
			</exportNetcdfRunFileActivity>
		</exportActivities>

...

This section calls the SWAN pre and post-adapters as well as the SWAN executable. Note: the run file must be passed as an argument to the SWAN pre and post-adapters.

Code Block

	xml	xml
title	executeActivities
	xml

<executeActivities>
			<executeActivity>
				<command>
					<className>nl.deltares.swan.SwanPreAdapter</className>
					<binDir>..\..\..\bin\Swan_adapter\bin</binDir>
				</command>
				<arguments>
					<argument>%WORK_DIR%\run_info.nc</argument>
				</arguments>
				<timeOut>99999999</timeOut>
				<ignoreDiagnostics>true</ignoreDiagnostics>
			</executeActivity>
			<executeActivity>
				<command>
					<executable>..\..\..\bin\Swan\swan_4091AB_3_del_win_vs2010.exe</executable>
				</command>
				<arguments>
					<argument>%WORK_DIR%\INPUT</argument>
				</arguments>
				<timeOut>99999999</timeOut>
				<ignoreDiagnostics>true</ignoreDiagnostics>
			</executeActivity>
			<executeActivity>
				<command>
					<className>nl.deltares.swan.SwanPostAdapter</className>
					<binDir>..\..\..\bin\Swan_adapter\bin</binDir>
				</command>
				<arguments>
					<argument>%WORK_DIR%\run_info.nc</argument>
				</arguments>
				<timeOut>99999999</timeOut>
				<ignoreDiagnostics>true</ignoreDiagnostics>
			</executeActivity>
		</executeActivities>

...

Model state
Output data (i.e. wind, water levels, wave spectra)

Code Block

	xml	xml
title	importActivities
	xml

<importActivities>
			<importStateActivity>
				<stateFile>
					<importFile>%ROOT_DIR%/workDir/swan-state.nc</importFile>
					<relativeExportFile>swan-restart.nc</relativeExportFile>
				</stateFile>
				<expiryTime unit="day" multiplier="3"/>
			</importStateActivity>
			<importPiNetcdfActivity>
				<importFile>..\output\SPEC2D_P1.nc</importFile>
				<timeSeriesSets>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>spectrum</valueType>
						<parameterId>Wave.variancedensity2D.simulated</parameterId>
						<domainParameterId>f</domainParameterId>
						<domainParameterId>dir</domainParameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="hour"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
				</timeSeriesSets>
			</importPiNetcdfActivity>
			<importPiNetcdfActivity>
				<importFile>POINTS.nc</importFile>
				<timeSeriesSets>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.hm0.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.he10.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.period.Tm-1.0.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.dir.E10.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.s0bh.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>Wave.period.Tps.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>scalar</valueType>
						<parameterId>H.simulated</parameterId>
						<locationSetId>$MODEL$.locations</locationSetId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>0</synchLevel>
						<expiryTime unit="week" multiplier="1"/>
					</timeSeriesSet>
				</timeSeriesSets>
			</importPiNetcdfActivity>
			<importPiNetcdfActivity>
				<importFile>..\output\swan2D.nc</importFile>
				<timeSeriesSets>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wave.hm0.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wave.he10.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wave.period.Tm-1.0.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wave.period.Tps.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wave.th0.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>Wave.s0bh.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
					<timeSeriesSet>
						<moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId>
						<valueType>grid</valueType>
						<parameterId>H.simulated</parameterId>
						<locationId>$MODEL$</locationId>
						<timeSeriesType>simulated historical</timeSeriesType>
						<timeStep unit="minute" multiplier="60"/>
						<readWriteMode>add originals</readWriteMode>
						<synchLevel>2</synchLevel>
						<expiryTime unit="hour" multiplier="24"/>
					</timeSeriesSet>
				</timeSeriesSets>
			</importPiNetcdfActivity>
		</importActivities>

Page tree

Versions Compared

Old Version 9

New Version 10

Key

SWAN pre-adapter