...
The Soil table for the Global and Detailed models model (check the filter) contains several soil parameters.
The user can add or remove new rows to the soil table or change the properties of the soilsoillayer.
NOTE: The state parameter Ψ5m entered per layer is used only in step 1 of the Global check to determine the thickness of the sensitive layer(s) Hvw.The description of all these parameters can be found on the symbol list
Soil parameters (per layer) for the Global and Detailed model
Name in English | Name in Dutch | Description | Symbol | Unit | Default + decimals + (range) | Used in Model
|
---|---|---|---|---|---|---|
Name | Naam | Material name |
|
|
| All |
Color | Kleur | Material color |
|
|
| All |
Description | Beschrijving | A short description of the material can be given |
|
|
| All |
Soil type | Grondtype | Soil type is used to determine if the material is sensitive to liquefaction |
| Boolean |
| All |
Fine diameter D15 | Fijne diameter D15 | Grain size: (D15 <D50) | D15 | micro m | 0.0 (30-2000) + (D15 <D50) | Global/ HMBreach
|
Median diameter D50 | Gemiddelde diameter D50 | Median grain size | D50 | micro m | 0.0 (30-2000) (D15 <D50) | Global/Detailed HMBreach |
State parameter over 5m | State parameter over 5 m | Lowest average state parameter over 5m (cumulative) between water level and 0,5 times the channel depth below the bottom of the channel. | Psi 5m | 0.0000 (-10-10) | Global |
...
See list of all soilparameters per llayers for all models
The symbol list all parameters can be found in the background : Symbol list