...
Button | Description |
---|---|
Toolbox | To perform a number of operations according to the Toolbox selected from the Toolbox tab in the Top Menu. For all the supported models this is the quick mode of the model maker and the possibility to combine several sources of bathymetry. |
Description | To add a description to the communication file (MDW file eg.) to describe the purpose of the present model. |
Hydrodynamics | Delft3D-WAVE can be use uncoupled (stand-alone) or coupled (offline and online). When choosing the coupled option the user needs to specify the MDF-file of the specific Delft3D-FLOW model. Another possibility is the online with Dashboard Flow option. This option will automatically result between a coupling between FLOW and WAVE, a commonly used feature. |
Grids | The data group Grids contains the following sub-data groups in the Working Space: Grids, Bathymetry, Spectral resolution and Nesting. All the tabs are always visible.
|
Time Frame | Defines the computational mode (stationary or non-stationary) and the time points for the WAVE computation. |
Boundaries | To define the boundaries, their location, type and other parameters describing them. It is possible to vary conditions in space and orientation. The wave spectrum can be created based on parametric relation or via the usage of a file. |
Obstacles | Defines obstacles in the Delft3D-WAVE simulation. There are two possibilities: sheet & dam. The user can simply click in the Delft Dashboard in order to specify the area where an obstacle is needed. Double click to finalize the line. |
Physical Parameters | To select or specify a number of parameters related to the physical conditions of the model area. The data Group Physical parameters contains the following sub-data groups in the Working Space: Constants, Wind, Processes, Various. All the tabs are always visible.
|
Numerical Parameters | To specify parameters related to the spectral space and the accuracy criteria. |
Output | To select or specify output there a number of possibilities. The data Group Output contains the following sub-data groups in the Working Space: General, Grids, Locations, Curves and Debug. All the tabs are always visible.
|