...
| Code Block |
|---|
# START OF HEADER # This file is created by Deltares # Additional commments # General part: t_ref = 19991026.000000 # Reference time t_ref_unit = ModifiedJulianDate # Unit used for reference time t_unit = min # Time unit (sec, min, hrs, etc.) #t_unit = hrs missing_value = -999.000 # Value used for undefined or missing data # For Pseudo ArcInfo or Spiderweb wind: n_cols = 400 # Number of columns used for wind datafield n_rows = 16 # Number of rows used for wind datafield x_unit = degree # Unit of distances on the grid #x_unit = m # Only for Pseudo ArcInfo wind: x0 = -12.000 # Xcoordinate of starting point of grid (in units specified in x_unit) y0 = 48.000 # Ycoordinate of starting point of grid (in units specified in x_unit) value_pos = centre # Location where the data is specified in a cell (centre or corner) #value_pos = corner cell_size = 0.12500 0.083333333 # Grid dimensions: dx and dy (in units specified in x_unit) n_quantitiesquantity = 3 # Number of quantities prescribed in the file quantity = x_wind y_wind air_pressure # Names of the quantities unit = m s-1 m s-1 Pa # Units of the quantities # Only for Spiderweb wind: radius = 600000.00 # Radius of spiderweb (in units specified in rad_unit) rad_unit = m # Unit of radius n_quantity = 3 # Number of quantities prescribed in the file quantity = wind_speed wind_from_direction p_drop # Names of the quantities unit = m s-1 degree Pa # Units of the quantities # Only for wind on a separate curvi-linear grid: grid_file = hirlam.grd # Separate (curvi-linear) grid on which the wind can be specified first_row = nmax # These four parameters determine the order in which the data last_row = 1 # is read from the separate wind file. In this way, data which is first_col = 1 # supplied in a reversed order, can also be read. last_col = mmax n_quantity = 1 # Number of quantities prescribed in the file quantity = air_pressure # Names of the quantities unit = Pa # Units of the quantities # END OF HEADER TIME = 0.0000000E+00 # Time where first dataset is supplied # Only for Spiderweb wind (every TIME input): x0 = 115.4 # Xcoordinate of cyclone eye (Spiderweb centre) at current TIME y0 = 18.9 # Ycoordinate of cyclone eye (Spiderweb centre) at current TIME p_drop_eye = 5300 # Pressure drop at cyclone eye (Spiderweb centre) at current TIME # Actual data field 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 155.0000 346.2500 357.5000 8.750000 20.00000 31.25000 42.50000 53.75000 65.00000 76.25000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 TIME = 1440 # Time where next dataset is supplied x0 = 114.4000 # Xcoordinate of cyclone eye (Spiderweb centre) at current TIME y0 = 18.90000 # Ycoordinate of cyclone eye (Spiderweb centre) at current TIME p_drop_eye = 5300.000 # Pressure drop at cyclone eye (Spiderweb centre) at current TIME 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 65.01978 75.11859 85.25320 95.45370 105.7529 116.1833 126.7762 137.5612 148.5649 159.8090 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 |