...
Code Block |
---|
### START OF HEADER
### This file is created by Deltares
### Additional commments
### General part:
filetype = Spiderweb # Type of meteo input file: curvi-linear, Pseudo ArcInfo or Spiderweb
time_zone = -3.0 # Time zone, indicating the time difference with GMT+0 (in hours)
ref_time = 19991026.000000 # Reference time
ref_time_unit = ModifiedJulianDay # Unit used for reference time
time_unit = min # Time unit (s, min, hrs, etc.)
#time_unit = hrs
NODATA_value = -999.000 # Value used for undefined or missing data
### For Pseudo ArcInfo or Spiderweb wind:
n_cols = 400 # Number of columns used for wind datafield
n_rows = 16 # Number of rows used for wind datafield
grid_unit = degree # Unit of distances on the grid in both x- and y-direction
#grid_unit = m
### Only for Pseudo ArcInfo wind:
#x0 = -12.000 # Xcoordinate of starting point of grid (in units specified in grid_unit)
#y0 = 48.000 # Ycoordinate of starting point of grid (in units specified in grid_unit)
#value_pos = centre # Location where the data is specified in a cell (centre or corner)
##value_pos = corner
#dx = 0.12500 # Grid dimensions: dx and dy (in units specified in grid_unit)
#dy = 0.083333333
#n_quantity = 3 # Number of quantities prescribed in the file
#quantity1 = x_wind # Name of quantity1
#quantity2 = y_wind # Name of quantity2
#quantity3 = air_pressure # Name of quantity3
#unit1 = m s-1 # Unit of quantity1
#unit2 = m s-1 # Unit of quantity2
#unit3 = Pa # Unit of quantity3
### Only for Spiderweb wind:
spw_radius = 600000.00 # Radius of spiderweb (in units specified in rad_unit)
spw_rad_unit = m # Unit of radius
n_quantity = 3 # Number of quantities prescribed in the file
quantity1 = wind_speed # Name of quantity1
quantity2 = wind_from_direction # Name of quantity2
quantity3 = p_drop # Name of quantity3
unit1 = m s-1 # Unit of quantity1
unit2 = degree # Unit of quantity2
unit3 = Pa # Unit of quantity3
### Only for wind on a separate curvi-linear grid:
#grid_file = hirlam.grd # Separate (curvi-linear) grid on which the wind can be specified
#first_row = nmax # These four parameters determine the order in which the data
#last_row = 1 # is read from the separate wind file. In this way, data which is
#first_col = 1 # supplied in a reversed order, can also be read.
#last_col = mmax
#n_quantity = 1 # Number of quantities prescribed in the file
#quantity1 = air_pressure # Name of quantity1
#unit1 = Pa # Unit of quantity1
### END OF HEADER
TIME = 0.0000000E+00 # Time where first dataset is supplied
x_spw_eye = 115.4 # Xcoordinate of cyclone eye (Spiderweb centre) at specified TIME
y_spw_eye = 18.9 # Ycoordinate of cyclone eye (Spiderweb centre) at specified TIME
p_drop_spw_eye = 5300 # Pressure drop at cyclone eye (Spiderweb centre) at specified TIME
1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999 1.388999
155.0000 346.2500 357.5000 8.750000 20.00000 31.25000 42.50000 53.75000 65.00000 76.25000
5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000 5300.000
TIME = 1440 # Time where next dataset is supplied
x_spw_eye = 114.4000 # Xcoordinate of cyclone eye (Spiderweb centre) at specified TIME
y_spw_eye = 18.90000 # Ycoordinate of cyclone eye (Spiderweb centre) at specified TIME
p_drop_spw_eye = 5300.000 # Pressure drop at cyclone eye (Spiderweb centre) at specified TIME
2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253 2.435253
65.01978 75.11859 85.25320 95.45370 105.7529 116.1833 126.7762 137.5612 148.5649 159.8090
5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544 5298.544
|