...
But the total slope is 1:6 so steeper than 1:7 => Flow slide is possible based on average slope => Global check fails.
Detailed check: ( see table below for intermediary results) Probability of flood damage by liquefaction < Allowable probability of failure => Detailed check passes.D-Flow Slide results
Overall check: No message.
...
And the total slope is 1:5 so steeper than 1:7 => Flow slide is possible based on average slope => Global check fails.
Detailed check: ( see table below for intermediary results) Probability of flood damage by liquefaction < Allowable probability of failure => Detailed check passes.D-Flow Slide results
Overall check: the Overall check gives two Warning messages because D50 < 200 μm and because the selected sand type is "Very fine", an Advanced check is therefore needed.
...
=> Flow slide is possible based on average slope => Global check fails.
Detailed check: ( see table below for intermediary results) Probability of flood damage by liquefaction < Allowable probability of failure => Detailed check passes.D-Flow Slide results
Overall check: The Overall check gives two Warning messages because D50 < 200 μm and because the selected sand type is "Very fine", an Advanced check is therefore needed.
...
=> Flow slide is not possible based on average slope => Global check passes.
Detailed check: ( see table below for intermediary results) Probability of flood damage by liquefaction < Allowable probability of failure => Detailed check passes.D-Flow Slide results
Overall check: as Global and Detailed check pass, the Overall passes. No message.
Case H:
Global check - Step 1a: Flow slide would lead to damage on levee => Go to step 1c.
...
=> Flow slide is not possible based on average slope => Global check passes.
Detailed check: ( see table below for intermediary results) Probability of flood damage by liquefaction > Allowable probability of failure => Detailed check fails.D-Flow Slide results
Overall check: Global passes and Detailed checks fails, that's not logical, so a warning message is displayed in the Overall check.
...