...
| Datasource name | Datasource code (ID) | Type | Original Interval | Aggregation Options | Available Parameter(s) [parameter code] | Remark |
|---|---|---|---|---|---|---|
| Knmi.Radar.Uncorrected | Grid | 5 minutes | Precipitation [P] | Grid definition required in grids.xml. | ||
Radar Corrected B (Near-real time) | Knmi.Radar.CorrectedB | Grid | 5 minutes | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. | |
Radar Corrected C2 (After) | Knmi.Radar.CorrectedC2 | Grid | 5 minutes | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. | |
Radar Corrected D2 (Re-analysis) | Knmi.Radar.CorrectedD2 | Grid | 5 minutes | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. | |
| Knmi.RegionalEps | Ensemble | 6 hours | Dew Point Temperature [DPT] | Note that the ensemble members 1-50 are | ||
| Knmi.Hirlam | Model Grid | 1 hour | Air Pressure [AirPressure] | Tested. | ||
| Knmi.Harmonie | Model Grid | 1 hour | Air Pressure [AirPressure] Global Radiation Flux [GlobalRadFlux] High Cloud Cover [HighCloudCover] Large Scale Precipitation [LargeScaleP] Latent Heat Flux [LatHeatFlux] Low Cloud Cover [LowCloudCover] Medium Cloud Cover [MediumCloudCover] Net Longwave Radiation Flux [NetLwRadFlux] Net Shortwave Radiation Flux [NetSwRadFlux] Relative Humidity [RH] Sensible Heat Flux [SensHeatFlux] Snow Depth [SnowDepth] Soil temperature level 2 [Temperature.Soil.Level2] Temperature 2 m above ground [TMP] Total Cloud Cover [TCDC] Total Precipitation [APCP] U-Component of Wind 10m above ground [UGRD:10m] V-Component of Wind 10m above ground [VGRD:10m] | Tested Grids details are recognized from the definition by WIWB (through NetCDF files) | ||
| Knmi.IrisUnvalidated Knmi.IrisValidated | TimeSeries | 1 day | Precipitation [P] Snow Depth [SnowDepth] | |||
| Knmi.Evaporation | TimeSeries | 1 day | Evaporation [Evaporation] | |||
| KNMI Synops | Knmi.Synops | TimeSeries | 1 hour | Air Pressure [AirPressure] Dew Point Temperature [DPT] Horizontal Visibility [HorizontalVisibility] Maximum Temperature 2m above ground [TMAX] Maximum Wind Speed [MaximumWindSpeed] Minimum temperature 2 m above ground [TMIN] Precipitation [P] Precipitation Duration [PrecipitationDuration] Relative Humidity [RH] Solar Radiation [Radiation.Solar] Temperature [TMP] Total Cloud Cover [TCDC] Total Precipitation [APCP] Wind Direction [WindDirection] Wind Speed [WindSpeed] | ||
| Knmi.WaterSetupEps | Ensemble TimeSeries | 6 hours | Water Surge [WaterSurge] | |||
| Knmi.Warnings | TimeSeries | 1 hour | Heat warning [Warning.Heat] | |||
| Knmi.WaquaTs | Model TimeSeries | 10 minutes | Astronomical Tide [AstronomicalTide] | |||
| Knmi.AwsTenMinutes | TimeSeries | 10 minutes | Air Pressure [AirPressure] | Tested | ||
Meteobase Makkink Evaporation | Meteobase.Evaporation.Makkink | Grid | 1 day | Evaporation [Evaporation] | ||
Meteobase Makkink Evaporation | Meteobase.Evaporation.PennmanMonteith | Grid | 1 day | Evaporation [Evaporation] | ||
Meteobase Precipitation | Meteobase.Precipitation | Grid | 1 day | Evaporation [Evaporation] | ||
| KNMI Synops (from Meteobase) | Knmi.FromMeteobase.Synops | 1 hour | Precipitation [P] |
Aggregated products
All data sources as in the table above have their original interval. If you want to import an aggregated product, the WIWB API supports that. You can aggregate every product with a multiplier of its original interval. The <timestep> configured in the Delft-FEWS import moduleInstance of that datasource will be interpreted whether you want to import the original or an aggregated product. E.g. the KNMI Radar products have an original interval of 5 minutes, so aggregation options are 10 minutes (2 x 5 minutes), 15 minutes (3 x 5 minutes) etc. As mentioned, the <timestep> definition in Delft-FEWS will be leading. Disaggregating is not supported.
Missing values.
If the WIWB specifies the missing value for a datasource, this will be used by FEWS. The missing value can also be specified in the import configuration as well. The default value for missing value is -9999 for the WIWB API.
...