...
| Code Block |
|---|
| <chart id="Example7" formatId="chartFormat2" width="500" height="306">
<timeSeries preferredColor="green" lineStyle="solid;thick" axis="right" visibleInLegend="true" label="Gemessen">series1</timeSeries>
<timeSeries preferredColor="red" lineStyle="solid;thick" axis="right" visibleInLegend="true" label="COSMO2">series2</timeSeries>
<timeSeries preferredColor="orange" lineStyle="solid;thick" axis="left" visibleInLegend="true" label="COSMO7">series3</timeSeries>
<timeSeries preferredColor="violet" lineStyle="solid;thick" axis="left" visibleInLegend="true" label="ECMWF">series4</timeSeries>
<fileName>Example7</fileName>
</chart>
|
| 
Threshold line only for timeseries on the left y axis
|
Stage/discharge plots
When a discharge is displayed, it is possible to show the stage on the right axis. It is not possible to configure this rating on the left axis (and the timeseries on the right axis), since a plot has to have at least one timeseries on the left axis.
...
The ticks on the right axis are calculated from the value of the discharge on the left axis by using a rating curve.
Stage/discharge plots support both PI rating curves and deprecated rating curves (deprecated rating curves are ratings obtained from xml file according to the schema ratingCurves.xsd)
Below an configuration and resulting plot. The option reverse is applicable only to deprecated rating curves.
| Code Block |
|---|
| <chart id="Example4" formatId="chartFormat1" width="900" height="300">
<rightAxis>
<ratingCurve>
<ratingCurveId>location1</ratingCurveId>
<reverse>true</reverse>
</ratingCurve>
</rightAxis>
<timeSeries axis="left" preferredColor="blue" markerStyle="none" lineStyle="solid;thick" label="geen verwachting" visibleInLegend="true">series1</timeSeries>
<fileName>Example4</fileName>
</chart>
|
| 
Threshold line only for timeseries on the left y axis
|
| Code Block |
|---|
| <chart id="Example8" formatId="chartFormat1" width="900" height="300">
<rightAxis>
<ratingCurve>
<ratingCurveId>location1</ratingCurveId>
<reverse>true</reverse>
</ratingCurve>
</rightAxis>
<timeSeries axis="both" preferredColor="blue" markerStyle="none" lineStyle="solid;thick" label="geen verwachting" visibleInLegend="true">series1</timeSeries>
<timeSeries axis="left" preferredColor="black" markerStyle="circle" lineStyle="solid;thick" label="meetwaarde" markerSize="3">series2</timeSeries>
<fileName>Example8</fileName>
</chart>
|
| 
Threshold line only for timeseries on the left y axis
|
...