...
| Info | ||
|---|---|---|
| ||
Access to the WIWIB API is done using a secure HTTPS connection. If a FEWS configuration is used with a client.truststore it may be required to import the latest public certificate of the WIWB service into the existing client.truststore. For more information on configuring secure HTTPS connection with a client.truststore, see How to configure secure https connection to Matroos |
A detailed presentation highlighting various WIWB configuration options in Delft-FEWS can be found in the attached document.
Note that the various improved configuration options related to the WIWB import in Delft FEWS (as described in the detailed presentation) are made available for Delft-FEWS versions 2016.01 and higher, with a patch from later then December 2018.
A template configuration for WIWB imports are also available in the attached ZIP file.
Import Configuration
To configure the WIWB import the dataSource property has to be specified. Se the list of supported dataSource values in the next section.
...
An extended table, offering more information about the WIWB parameters can be found the attached overview Excel file (version November 2018).
| Datasource name | Datasource code (ID) | Type | Original Interval | Available Parameter(s) [parameter code] | Remarks |
|---|---|---|---|---|---|
| Harmonie | Knmi.Harmonie | Model Grid, forecast | 1 hour | Air Pressure [AirPressure] | |
| HiRLAM | Knmi.Hirlam | Model Grid, forecast | 1 hour | Air Pressure [AirPressure] | |
| KNMI AWS 10 Minutes | Knmi.AwsTenMinutes | Scalar, observed | 10 minute | Air Pressure [AirPressure] | |
| KNMI Evaporation (From Meteobase) | Knmi.FromMeteobase.Evaporation | Scalar, observed | 1 day | Evaporation [Evaporation] | |
| KNMI Reference Evaporation | Knmi.Evaporation | Scalar, observed | 1 day | Evaporation [Evaporation] | |
| KNMI Iris Stations | Knmi.IrisValidated | Scalar, observed | 1 day | Precipitation [P] | |
| KNMI Naval Reports | Knmi.Naval.Forecasts | Report, observed | 1 day | Naval reports for warnings and forecasts [Naval.Reports] | |
| KNMI Radar Corrected B (Near-Real time) | Knmi.Radar.CorrectedB | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. |
| KNMI Radar Corrected C2 (After) | Knmi.Radar.CorrectedC2 | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. |
| KNMI Radar Corrected D2 (Re-analysis) | Knmi.Radar.CorrectedD2 | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. |
| KNMI Radar Uncorrected (Real time) | Knmi.Radar.Uncorrected | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. |
| KNMI Regional EPS | Knmi.RegionalEps | Ensemble Scalar, forecast | 6 hour | Dewpoint Temperature [DPT] | Note that the ensemble members 1-50 are the real ensemble, while member 51 and 52 are the control and deterministic runs. So it is advised to store the ensemble in a temporary ensembleId and to postprocess the members 1-50 to the real ensemble. |
| KNMI Synops | Knmi.Synops | Scalar, observed | 1 hour | Air Pressure [AirPressure] | |
| KNMI Synops (From Meteobase) | Knmi.FromMeteobase.Synops | Scalar, observed | 1 hour | Precipitation [P] | |
| KNMI Waqua TS | Knmi.WaquaTs | Model Scalar, forecast | 10 minute | Astronomical Tide [AstronomicalTide] | |
| KNMI Weather Warnings | Knmi.Warnings | Warning, observed | 1 hour | Heat warning [Warning.Heat] | |
| KNMI Water Setup EPS | Knmi.WaterSetupEps | Ensemble Scalar, forecast | 6 hour | Water Surge [WaterSurge] | |
| Meteobase Makkink Evaporation | Meteobase.Evaporation.Makkink | Grid, observed | 1 day | Evaporation [Evaporation] | |
| Meteobase Pennman-Monteith Evaporation | Meteobase.Evaporation.PennmanMonteith | Grid, observed | 1 day | Evaporation [Evaporation] | |
| Meteobase Precipitation | Meteobase.Precipitation | Grid, observed | 1 day | Precipitation [P] |
...