...
- Reference level.
This option is always available. It compares the values of the TimeSeriesSet to a value you can specify by typing intot the box marked <enter value>, and displayes the difference: TimeSeriesSet value - reference value. - Compare runs (available since 2020.01)
This option is only available if you have selected at leaset 2 different runs for each timeSeriesSet in the display. The number can be greater than 2, and does not need to be the same number for all timeSeries. (For example 2 different runs for parameter A, and 3 for B). As reference level, the oldest of this runs is selected, and the difference compared to this run is displayed. (Run value - reference run value) - Select timeSeries as reference level
This option is available if you have at least two different time series open in the plot. They can be different runs, but they do not need to be. The difference between the Time series and reference time series will be displayed. (TimeSeries value - reference TimeSeries value)
If the checkbox "Relative difference(%)" is checked, the relative difference will be displayed (in %). This is available for all three options. 100*(TimeSeries value - reference TimeSeries value)/reference TimeSeries value. If the reference value is 0, N.a.N will be the result.
Display lows below value & Display peaks above value
...