...
- add sheet diff_sim_inp to your spreadsheet
- carry out changes in sheet 'runMF':
- change location set for import of QSRC_GW from file XXX_QSRC_GW_TimeSeries.xml from XXX_wells_all to XXX_wells_singles_and_childs
- add import of QSRC_GW from file XXX_QSRC_GW_TimeSeries_MultiLayer.xml for XXX_wells_parents
- check if QSRC_GW from file XXX_QSRC_GW_merged_MapStacks.xml is imported for the merged layer
- carry out changes in sheet 'interpolate':
- add interpolation of QSRC_GW from merged layer to location set 'XXX_parents_and_singles'
- carry out changes in sheet 'compare':
- add comparison of QSRC_GW created in 3. for location set 'XXX_parents_and_singles'
- run macro 'Write_diff_sim_inp_XMLfiles'
- run macro 'Write_runMF_XMLfiles' (make sure you run the macro 'remove' afterwards)
- run macro 'Write_interpolate_XMLfiles'
- run macro 'Write_compare_XMLfiles'
- Check the contents of the created files. It might be wise to validate with an XML-validation tool.
- Copy the files which are OK to your configuration --> \Config\ModuleConfigFiles
...
- add module instance "XXX_diff_sim_inp_ref(Scenario)' to the specific workflows XXX_ref(Scenario) after module instance interpolate
- add module instance "XXX_diff_sim_inp_whatif(Scenario)' to the specific workflows XXX_modified_Scenario after module instance interpolate
see example files WMW_modified_Historic 4.99 default.xml and WMW_ref(Historic) 4.99 default.xml
Step 5: Update LocationSets.xml
...
- comment the shut down activity in the GA run out for all scenarios
- run the model
- check for each scenario if the id's in WMW_QSRC_GW_TimeSeries_MultiLayer.xml and WMW_QSRC_GW_TimeSeries.xml in the toNGMS modules folder are the same as listed in the idmapping (Config/IdMapFiles), especially check the ordering of layers in the name of the super / normal parents
- if the id's are not the same you have to update the id mapping (see also pages 'HOW TO add a new module' #Step 4.8. Obtain configuration data via Module Adapter and Go to #Step 5.9. IdMaps for GW abstraction), therefore
- run the the xxx_prepare.but for each scenario-type in the modules directory
- populate the location worksheets as follows
- #**# copy the individual locations (id, x,y,z) as listed in XXX_GW_abstractions_Locations.xml
- paste into column H,I,J,K (starting at row 3)
- copy the parent locations (id, x,y,z) as listed in XXX_GW_abstractions_Locations_MultiLayer.xml
- paste into column B,C,D,E (starting at row 3)
- check that the format of z coordinatecomment the shut down activity in the GA run ou
- Create a backup with name XXX_LocationsResults_versionnumber.xls
- Run the macro 'create_XMLfiles'
- The macro creates XML-files in the directory of the data-spreadshee
- The macro overwrites existing files
- You can skip location types to be generated
- Check the contents of the id map files. It might be wise to validate with an XML-validation tool.
- Copy the id map files which are OK to your configuration --> \Config\IdMapfiles
- #**# copy the individual locations (id, x,y,z) as listed in XXX_GW_abstractions_Locations.xml
- enable the shut down activity in the GA run
...
- fews executes without errors
- you can see all results you expect in the displays, filters,..
- are some locations missing?
Wiki Markup are the results reasonable (sign, amount,...) ? \\ \[WMW_output.in\|^WMW_output.in\|WMW_output.in\][^WMW_output.in][XXX_output.in|^WMW_output.in|XXX_output.in][example file|^WMW_output.in][example file|^WMW_output.in]