...
Maximum relative error between SLIQ2D-DOS and D-FLOW SLIDE:
Case | Slope angle at which instability occurs (Tan Alpha) | Tan Alpha_p | Ko_p | Normal stress p | Deviatoric stress q |
---|---|---|---|---|---|
bm5-1a | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1b | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1c | 0.00 | 0.54 | 0.13 | 0.00 | 0.00 |
bm5-1d | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1e | 0.00 | 0.00 | 0.15 | 0.00 | 0.02 |
bm5-1f | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
bm5-1g | 0.00 | 0.00 | 0.12 | 0.00 | 0.02 |
...
Results of SLIQ2D-Windows for bm5-2 - Values of the critical slope angle for each calculated point:
D-FLOW SLIDE results
Results between SLIQ2D-Windows and D-FLOW SLIDE are exactly the same for the tangent angleall calculated parameters, as show shown in the table below.
Maximum relative error between SLIQ2D-Windows and D-FLOW SLIDE:
Parameter | Max. |
---|
...
relative error (%) | |
---|---|
Tan Alpha_p | 0.00 |
Ko_p | 0.00 |
Normal stress p | 0.00 |
Deviatoric stress q | 0.00 |
...