...
will be applied as a positive offset to the stage value. Offsets will apply to the tableRecord in which it is defined and the records above this record until a new offset is defined.
Configuration example
...
Code Block | ||||
---|---|---|---|---|
| ||||
<transformation id="stageToDischarge">
<stageDischarge>
<table>
<stage>
<variableId>input</variableId>
</stage>
<coefficientSet>
<type>level_to_flow</type>
<authoriseExtrapolation>true</authoriseExtrapolation>
<interpolationType>linear</interpolationType>
<tableRecord stage="0.433" discharge="0"/>
<tableRecord stage="0.457" discharge="0.0595"/>
<tableRecord stage="0.488" discharge="0.190"/>
<tableRecord stage="0.610" discharge="1.84"/>
<tableRecord stage="0.686" discharge="3.85"/>
<tableRecord stage="0.762" discharge="6.71"/>
<tableRecord stage="0.914" discharge="14.9"/>
<tableRecord stage="4.88" discharge="306"/>
<tableRecord stage="4.95" discharge="340"/>
<tableRecord stage="5.03" discharge="377"/>
<tableRecord stage="5.09" discharge="408"/>
<tableRecord stage="5.11" discharge="419"/>
</coefficientSet>
<discharge>
<variableId>output</variableId>
</discharge>
</table>
</stageDischarge>
</transformation>
|