Versions Compared

Old Version 50

changes.mady.by.user Unknown User (schelle@wldelft.nl)

Saved on

compared with

New Version 51

changes.mady.by.user Unknown User (schelle@wldelft.nl)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Initial version

...

No Format
<?xml version="1.0" encoding="UTF-8"?>
<locationSets version="1.1" 
xmlns="http://www.wldelft.nl/fews" 
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
xsi:schemaLocation="http://www.wldelft.nl/fews 
http://fews.wldelft.nl/schemas/version1.0/locationSets.xsd">
	<locationSet id="LevelGauges" name="LevelGauges">
		<locationId>one</locationId>
		<locationId>two</locationId>
		<locationId>three</locationId>
		<locationId>four</locationId>
	</locationSet>

</locationSets>

Set up Id Mapping

Step 5: Make the idmap file IdImport 1.00.xml

 The format of the IdMap files is described in the DELFT-FEWS configuration guid and also in the .xsd scheme. All idMaps are stores stored in the IdMapFiles directory.  The Idmap needed for this example (IdImport 1.00 Default.xml) should match the parameter WaterLevel to H.obs and should also map the four locations. The files is shown below:

...

Similar to ModuleInstances IdMap , IdMaps should also be registered. In this case we need to register the IdImport file in the file IdMapDescriptors in the RegionConfigFiles directory:

...

Delft-Fews only shows data is you specifically tel it to show datathat is configured to be visible to the user. All other data is invisible to the user. The file DisplayGroups.xml (located in the SystemConfigFiles directory) defines pre-defined graphs. In the example below five graphs have been defined to view the newly imported data:

No Format
<?xml version="1.0" encoding="UTF-8"?>
<displayGroups version="1.0"
xmlns="http://www.wldelft.nl/fews"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.wldelft.nl/fews
http://fews.wldelft.nl/schemas/version1.0/displayGroups.xsd">
	<displayGroup name="Test">
		<display name="Gauge One">
			<relativeViewPeriod unit="hour" start="-12" end="36"/>
			<subplot>
				<timeSeriesSet>
					<moduleInstanceId>Import</moduleInstanceId>
					<valueType>scalar</valueType>
					<parameterId>H.obs</parameterId>
					<locationId>one</locationId>
					<timeSeriesType>external historical</timeSeriesType>
					<timeStep unit="hour" multiplier="1"/>
					<relativeViewPeriod unit="hour" end="48" start="-48"/>
					<readWriteMode>add originals</readWriteMode>
				</timeSeriesSet>
			</subplot>
		</display>
		<display name="Gauge Two">
			<relativeViewPeriod unit="hour" start="-12" end="36"/>
			<subplot>
				<timeSeriesSet>
					<moduleInstanceId>Import</moduleInstanceId>
					<valueType>scalar</valueType>
					<parameterId>H.obs</parameterId>
					<locationId>two</locationId>
					<timeSeriesType>external historical</timeSeriesType>
					<timeStep unit="hour" multiplier="1"/>
					<relativeViewPeriod unit="hour" end="48" start="-48"/>
					<readWriteMode>add originals</readWriteMode>
				</timeSeriesSet>
			</subplot>
		</display>
		<display name="Gauge Three">
			<relativeViewPeriod unit="hour" start="-12" end="36"/>
			<subplot>
				<timeSeriesSet>
					<moduleInstanceId>Import</moduleInstanceId>
					<valueType>scalar</valueType>
					<parameterId>H.obs</parameterId>
					<locationId>three</locationId>
					<timeSeriesType>external historical</timeSeriesType>
					<timeStep unit="hour" multiplier="1"/>
					<relativeViewPeriod unit="hour" end="48" start="-48"/>
					<readWriteMode>add originals</readWriteMode>
				</timeSeriesSet>
			</subplot>
		</display>
		<display name="Gauge Four">
			<relativeViewPeriod unit="hour" start="-12" end="36"/>
			<subplot>
				<timeSeriesSet>
					<moduleInstanceId>Import</moduleInstanceId>
					<valueType>scalar</valueType>
					<parameterId>H.obs</parameterId>
					<locationId>four</locationId>
					<timeSeriesType>external historical</timeSeriesType>
					<timeStep unit="hour" multiplier="1"/>
					<relativeViewPeriod unit="hour" end="48" start="-48"/>
					<readWriteMode>add originals</readWriteMode>
				</timeSeriesSet>
			</subplot>
		</display>
		<display name="All together">
			<relativeViewPeriod unit="hour" start="-12" end="36"/>
			<subplot>
				<timeSeriesSet>
					<moduleInstanceId>Import</moduleInstanceId>
					<valueType>scalar</valueType>
					<parameterId>H.obs</parameterId>
					<locationSetId>LevelGauges</locationSetId>
					<timeSeriesType>external historical</timeSeriesType>
					<timeStep unit="hour" multiplier="1"/>
					<relativeViewPeriod unit="hour" end="48" start="-48"/>
					<readWriteMode>add originals</readWriteMode>
				</timeSeriesSet>
			</subplot>
		</display>
	</displayGroup>
</displayGroups>

Test the import

...

Add to the appropriate filters(s)
To be able to use the main map display and the filter filters to access the data you should set up en an entry in the Filters.xml file in the RegionConfigFiles directory. See the example below:
 No Format
<?xml version="1.0" encoding="UTF-8"?>
<filters version="1.1"
xmlns="http://www.wldelft.nl/fews"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.wldelft.nl/fews
http://fews.wldelft.nl/schemas/version1.0/filters.xsd">
	<filter name="Gauges" id="Gauges">
		<timeSeriesSet>
			<moduleInstanceId>Import</moduleInstanceId>
			<valueType>scalar</valueType>
			<parameterId>H.obs</parameterId>
			<locationSetId>LevelGauges</locationSetId>
			<timeSeriesType>external historical</timeSeriesType>
			<timeStep unit="hour" multiplier="1"/>
			<relativeViewPeriod unit="hour" end="48" start="-48"/>
			<readWriteMode>add originals</readWriteMode>
		</timeSeriesSet>
	</filter>
</filters>

Test the import
To test the import run the ImportExternal Workflow. Check to log panel for error messages. If you want to view the data please make sure to first set the system time to a time/date you have data for. In this example August 23 2006.