What | nameofinstance.xml |
---|---|
Required | no |
Description | Determine mass balance for a specified polygon |
schema location |
Excerpt | ||
---|---|---|
| ||
Determine mass balance for a specified polygon |
Table of Contents |
---|
Introduction
The mass-balances module determines the inflow, outflow and storage change within a give polygon from available flow fields. The various parts of the mass balance are computed separately and result in a ''scalar'' timeseries:
- To compute the horizontal inflow and outflow, you need to have timeseries of the flow in x- and y-direction defined on a rectangular grid.
- To compute the vertical flow, you need to have timeseries of the flow coming in through the lower face of the grid cells and the flow coming in through the upper face.
- To compute the storage change, you need either the storage change per grid cell or the water table per grid cell. In the first case, the computation consists of summing the values over all grid cells within the given polygon, in the second case, the change over time must be computed as well.
The polygon for which the mass balance is determined is defined via the ''location set'' of the output timeseries: the locations defined in that set are taken as the vertices of the polygon. Grid cells are considered to be inside the polygon if their centre is.
In the sections below the different elements of the configuration are described
General
description
An optional description
exportTypeStandard
This type specifies which reader should be used to read the file. The type must be one from the enumeration. Presently (2007/02) only bfg and pi are included in this list.
exportType
This type specifies which reader should be used to read the file. It may be any string as long as this type is supported by the TimeSeriesExport module. The list of supported types is given below.
folder
Folder (directory) in which to store the exported files.
exportFileName
This elements describes how to construct the filename(s) of the exported file(s).
If only the name element is given a fixed name is used for each export. The prefix and suffix elements describe how to create a filename prefix and/or suffix. The temporaryPrefix is used to generate a prefix for the temporary file as it is being written. After that the fine is renamed.
validate
Optional element. Only applicable if the data are exported to the xml-file. This option activates the validation of the exported file against a XML schema.
idmapId
Id of IdMap to be used for parameterId and locationId mapping
unitConversionsId
Id of UnitConversions to be used for unit mapping
flagConversionsId
Id of flagConversions to be used for flag mapping
exportMissingValue/exportMissingValueString
Missing value definition for this time series. Either a string or a number. Defaults to NaN if not defined.
omitMissingValues
If set to true records with missing values are not exported
exportTimeZone
TimeZone in which to export the data. Can either be a string (timeZoneName) or an offset (timeZoneOffset).