...
Case | Step 1a | Step 1c | Step 1d | Step 1e Average slope | Step 1e Breach flow | Step 1e | Global check | Detailed check | Warning message(s) | Information message |
---|---|---|---|---|---|---|---|---|---|---|
A | No | Pass | - | D50 < 200 μm (a) | ||||||
B | Yes | Yes | Fail | - | Artificial foreland (b) | |||||
C | Yes | No | Yes | Fail | - | Steepest slope over 5 m (c) | ||||
D | Yes | No | No | Yes | No | Yes | Fail | - | ||
E | Yes | No | No | Yes | Yes | Yes | Fail | - | D50 < 200 μm (a) Very fine sand (d) | |
F | Yes | No | No | No | Yes | Yes | Fail | - | D50 < 200 μm (a) Very fine sand (d) | |
G | Yes | No | No | No | No | No | Pass | - | ||
H | Yes | No | No | No | No | No | Pass | - | Illogical result (e) | |
I | Yes | No | No | No | No | No | Pass | Not available | ||
J | Yes | No | No | Yes | No | Yes | Fail | Not available |
...
d The selected sand type is "Very fine" so the breach flow check in step 1e could not be performed, Advanced check needed.
e Global passes but Detailed fails, check the input.
For case A, the same input as benchmark 1-1 (see group 1) is used except:
...
Detailed check: see table below for D-Flow Slide results
Overall check: Global passes and Detailed checks fails, that's not logical, so a warning message is displayed in the Overall check. No message.
Case I:
Global check : idem case H => Global check passes.
Detailed check: Results not available.
Overall check: the Global check passes and the Detailed check is not available. Therefore, the Overall check passes and no warning is given about illogical resultsNo message.
Case J:
Global check : idem case B => Global check fails.
Detailed check: Results not available.
Overall check: the Global check fails and the Detailed check is not available. Therefore, the Overall result is not available, a detailed check is needed No message.
D-Flow Slide results
D-FLOW SLIDE results are in accordance with the results by hand as show in the tables below.
...