...
| Case | Step 1a | Step 1c | Step 1d | Step 1e Average slope | Step 1e Breach flow | Step 1e | Global check | Detailed check | Warning message(s) | Information message |
|---|---|---|---|---|---|---|---|---|---|---|
| A | No | Pass | - | D50 < 200 μm (a) | ||||||
| B | Yes | Yes | Fail | - | Artificial foreland (b) | |||||
| C | Yes | No | Yes | Fail | - | Steepest slope over 5 m (c) | ||||
| D | Yes | No | No | Yes | No | Yes | Fail | - | ||
| E | Yes | No | No | Yes | Yes | Yes | Fail | - | D50 < 200 μm (a) Very fine sand (d) | |
| F | Yes | No | No | No | Yes | Yes | Fail | - | D50 < 200 μm (a) Very fine sand (d) | |
| G | Yes | No | No | No | No | No | Pass | - | ||
| H | Yes | No | No | No | No | No | Pass | - | Illogical result (e) | |
| I | Yes | No | No | No | No | No | Pass | Not available | ||
| J | Yes | No | No | Yes | No | Yes | Fail | Not available |
...
d The selected sand type is "Very fine" so the breach flow check in step 1e could not be performed, Advanced check needed.e Global passes but Detailed fails, check the input.
For case A, the same input as benchmark 1-1 (see group 1) is used except:
...