...
Imports time series data from Diver loggers. The files have a sort of Windows ini file format with file extension (*.mon). The format of the MON ini files is not well defined. Many programs interpret the structure differently and have various names for the ini file sections and parameters.
Sections: Section declarations start with '\[' and end with '\]'; i.e. '\[Logger settings\]' or '\[Instrument info\]'.Wiki Markup - Parameters or item: this is the content of a section with an '=' sign between the key and the value; i.e. "location = abc"
The Date format used is: "yyyy/MM/dd HH:mm:ss"
Configuration (Example)
A complete import module configuration consists of an ID Mapping file and a Import Module Instance file.
ModuleConfigFiles
The files can contain a flexible number of channels, where a channel will contain information on one parameter. Example files with 2 and 3 channels will be shown, when multiple channels/parameters need to be imported a <timeSeriesSet> needs to be configured for each channel/parameter. To illustrate this an example config for an import with 3 channels is given.
Configuration (Example)
A complete import module configuration consists of an ID Mapping file and a Import Module Instance file.
ModuleConfigFiles
The following example of an Import Module Instance will import the time series as The following example of an Import Module Instance will import the time series as equidistant series for timezone GMT+1 with a time step of 1 hour. Many times the MON files do not save the data at rounded hourly tims, therefore a tolerance has been added to map the imported data to correct hourly interval time series.
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
<?xml version="1.0" encoding="UTF-8" encoding="UTF-8"?> <timeSeriesImportRun ......"> <import> <general> <importType>DIVERMON</importType> <folder>$IMPORT_FOLDER_MON$</folder> <failedFolder>$IMPORT_FAILED_FOLDER_MON$</failedFolder> <backupFolder>$IMPORT_BACKUP_FOLDER_MON$</backupFolder> <idMapId>IdImportMON</idMapId> <unitConversionsId>ImportUnitConversions</unitConversionsId> <importTimeZone> <timeZoneOffset>+01:00</timeZoneOffset> </importTimeZone> <dataFeedId>MON</dataFeedId> </general> <tolerance locationSetId="ImportMON_H.meting.cm_uur" parameterId="H.meting.cm" timeUnit="minute" unitCount="30"/> <timeSeriesSet> <moduleInstanceId>ImportMON</moduleInstanceId> <valueType>scalar</valueType> <parameterId>H.meting.cm</parameterId> <locationSetId>ImportMON_H.meting.cm_uur</locationSetId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="hour" multiplier="1"/> <readWriteMode>add originals</readWriteMode> <synchLevel>1</synchLevel> </timeSeriesSet> </import> </timeSeriesImportRun> |
IdMapFiles
ID mapping fefines mappings between Diver MON and FEWS parameters and locations. Remember that ID mapping is case sensitive.
...
<idMap version="1.1" ..............>
<map internalParameter="H.meting.cm" internalLocation="Dorperdijk_beneden" externalParameter="niveau" externalLocation="Dorperdijk beneden"/>
</idMap>
?>
<timeSeriesImportRun ......">
<import>
<general>
<importType>DIVERMON</importType>
<folder>$IMPORT_FOLDER_MON$</folder>
<failedFolder>$IMPORT_FAILED_FOLDER_MON$</failedFolder>
<backupFolder>$IMPORT_BACKUP_FOLDER_MON$</backupFolder>
<idMapId>IdImportMON</idMapId>
<unitConversionsId>ImportUnitConversions</unitConversionsId>
<importTimeZone>
<timeZoneOffset>+01:00</timeZoneOffset>
</importTimeZone>
<dataFeedId>MON</dataFeedId>
</general>
<tolerance locationSetId="ImportMON_H.meting.cm_uur" parameterId="H.meting.cm" timeUnit="minute" unitCount="30"/>
<timeSeriesSet>
<moduleInstanceId>ImportMON</moduleInstanceId>
<valueType>scalar</valueType>
<parameterId>H.meting.cm</parameterId>
<locationSetId>ImportMON_H.meting.cm_uur</locationSetId>
<timeSeriesType>external historical</timeSeriesType>
<timeStep unit="hour" multiplier="1"/>
<readWriteMode>add originals</readWriteMode>
<synchLevel>1</synchLevel>
</timeSeriesSet>
</import>
</timeSeriesImportRun>
|
Here is an example config file for an import file with three channels:
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
<?xml version="1.0" encoding="UTF-8"?>
<timeSeriesImportRun ......">
<import>
<general>
<importType>DiverMon</importType>
<folder>$IMPORT_FOLDER$/DiverMon</folder>
<idMapId>IdMap</idMapId>
<missingValue>-999.0</missingValue>
<expiryTime unit="day" multiplier="366"/>
</general>
<timeSeriesSet>
<moduleInstanceId>ImportMON</moduleInstanceId>
<valueType>scalar</valueType>
<parameterId>X.yy.zz</parameterId>
<locationId>Delft</locationId>
<timeSeriesType>external historical</timeSeriesType>
<timeStep unit="minute" multiplier="10"/>
<readWriteMode>add originals</readWriteMode>
</timeSeriesSet>
<timeSeriesSet>
<moduleInstanceId>ImportMON</moduleInstanceId>
<valueType>scalar</valueType>
<parameterId>A.bb.cc</parameterId>
<locationId>Delft</locationId>
<timeSeriesType>external historical</timeSeriesType>
<timeStep unit="minute" multiplier="10"/>
<readWriteMode>add originals</readWriteMode>
</timeSeriesSet>
<timeSeriesSet>
<moduleInstanceId>ImportMON</moduleInstanceId>
<valueType>scalar</valueType>
<parameterId>D.ee.ff</parameterId>
<locationId>Delft</locationId>
<timeSeriesType>external historical</timeSeriesType>
<timeStep unit="minute" multiplier="10"/>
<readWriteMode>add originals</readWriteMode>
</timeSeriesSet>
</import>
</timeSeriesImportRun>
|
IdMapFiles
ID mapping defines mappings between Diver MON and FEWS parameters and locations. Remember that ID mapping is case sensitive.
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
<idMap version="1.1" ..............>
<parameter internal="G.hh.ii" external="LEVEL"/>
<parameter internal="J.kk.ll" external="TEMPERATURE"/>
<parameter internal="X.yy.zz" external="PCH"/>
<parameter internal="A.bb.cc" external="HG"/>
<parameter internal="D.ee.ff" external="2: SPEC.COND."/>
<location internal="Utrecht" external="13PB1"/>
<location internal="Delft" external="ro954"/>
</idMap>
|
Example file
There is a wide range of MON file types, here are examples of files with 2 and 3 channels respectively.
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
Data file for DataLogger.
==============================================================================
COMPANY : Your Company Name
LICENSE :
DATE : 08/24/07
TIME : 11:20:44
FILENAME : H:\Grondwater\DLG-Mariapeel NIEUW\24-8-2007\13PB175646_03_16_0708_23_07.mon
CREATED BY : EnviroMon version 1.9
========================== BEGINNING OF DATA ==========================
[Instrument info]
Instrument type =Diver =3
Instrument state =Stopped =2
Serial number =.N00-75646 210.
Instrument number =13PB1
=0.00000000000000E-0000
Location =13PB1
Sample Rate =00 01:00:00 0
Sample Mode =T
Channel =2
[Channel 1]
Identification =LEVEL
Reference =0.0 cm
Range =500.0 cm
Master Level =0.0 cm
Altitude =0 m
[Channel 2]
Identification =TEMPERATURE
Reference =-20.00 deg C
Range =100.00 deg C
Master Level =100.00 deg C
Altitude =-20.00 deg C
[Instrument info from data header]
Serial number =.N00-75646 210.
Instrument number =13PB1
Location =13PB1
Sample Rate =00 01:00:00 0
Sample Mode =T
Tb =22:47:10 16/03/07
Te =22:47:10 23/08/07
[Channel 1 from data header]
Identification =LEVEL
Reference =0.0 cm
Range =500.0 cm
Master Level =0.0 cm
Altitude =0 m
[Channel 2 from data header]
Identification =TEMPERATURE
Reference =-20.00 deg C
Range =100.00 deg C
Master Level =100.00 deg C
Altitude =-20.00 deg C
[Data]
3841
2007/03/16 10:47:22.0 93.2 11.61
2007/03/16 11:47:22.0 209.7 8.96
2007/03/16 12:47:22.0 209.4 8.93
2007/03/16 13:47:22.0 208.9 8.94
2007/03/16 14:47:22.0 208.5 8.95
2007/03/16 15:47:22.0 207.9 8.95
2007/03/16 16:47:22.0 207.7 8.96
|
Example file
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
Data file for DataLogger. ============================================================================== COMPANY : Your<Company Company Name LICENSE :name> COMP.STATUS: Do DATE : 0822/2410/072013 TIME : 1107:2022:4429 FILENAME : HD:\Grondwater\DLG-Mariapeel NIEUW\24-8-2007\13PB175646_03_16_0708_23_07.mondiver offive\vistrap\MON\ro954_131022072229_M0026.MON CREATED BY : EnviroMonSWS version 1.9Diver-Office 5.0.25.0 ========================== BEGINNING OF DATA ========================== [InstrumentLogger infosettings] Instrument type type =CTD-Diver=17 Status =Diver =3 Instrument state =StoppedStarted =20 Serial number =.N00N10-75646M0026 210317. Instrument number =13PB1 =0.00000000000000E-0000 Location =13PB1 Sample Rate =00 01:00:00 0 =ro954 Sample period Mode =M10 Sample method =T Channel =T Number of channels =23 [Channel 1] Identification =LEVELPRESSURE Reference level =0.0400 cm Range =500.05750 cm Master Levellevel =0.05750 cmCMH2O Altitude =0 m [Channel 2] Identification =TEMPERATURE Reference level =-20.00 deg C°C Range =100.00 deg C°C [Channel 3] MasterIdentification Level =100.00 deg C=2: SPEC.COND. AltitudeReference level =0.000 =-20.00mS/cm Range deg C [Instrument info from data header] Serial number =.N00-75646 210.120.000 mS/cm [Series settings] InstrumentSerial number =13PB1 Location =.N10-M0026 317. Instrument number =13PB1 SampleLocation Rate =00 01:00:00 0 =ro954 Sample Modeperiod =00 =T00:10:00 0 Sample method Tb =T Start date / time =2200:4700:1008 1612/0309/0713 TeEnd date / time =2200:4720:1006 2322/0810/0713 [Channel 1 from data header] Identification =LEVELPRESSURE Reference level =0.0=400 cm Range =500.05750 cm Master Levellevel =0.05750 cmCMH2O Altitude =0 m [Channel 2 from data header] Identification =TEMPERATURE Reference level =TEMPERATURE -20.00 °C Range Reference =-20100.00 °C [Channel 3 from degdata Cheader] RangeIdentification =2: SPEC.COND. Reference level =1000.00000 deg C mS/cm Range Master Level =100120.00 000 deg C AltitudemS/cm [Data] 5751 2013/09/12 08:00:00.0 1332 18.18 =-20.00 deg C [Data] 3841 2007/03/16 10:47:22.0 0.824 2013/09/12 08:10:00.0 1326 93 18.218 110.61828 20072013/0309/1612 1108:4720:2200.0 1328 209 18.717 80.96824 20072013/0309/1612 1208:4730:2200.0 209.4 1329 8.93 2007/03/16 13:47:22.018.16 208.90.828 2013/09/12 08:40:00.0 8.94 2007/03/16 14:47:22.0 1329 20818.5 17 80.95824 20072013/0309/1612 1508:4750:2200.0 1328 207.9 18.21 80.95824 20072013/0309/1612 1609:4700:2200.0 1329 207.7 18.23 80.96820 |
Accepted Mon file Sections and Parameters
The Mon Import module in Delft-FEWS does not parse all data in the MON file. The important sections and parameters are the following:
\[Logger settings\] or \ [Instrument info\]; Read location Id from this sectionWiki Markup - Location or Locatie ; location Id
- \[Channel X\] or \ [Kanaal X\] ; Not usedunmigrated-wiki-markup
- \[Series settings\] or \ [Instrument info from data header\] ; Not used
Wiki Markup - \[Channel X from data header\] or \ [Kanaal X from data header\]; Read Parameter Id
- Identification or Identificatie = Parameter Id
- \[Data\]; Data values with the different channels in columns. The datavalues may have a "."or a ","as decimal seperator, both options are accepter by the import function.
When the MON file is not in the correct format a warning message is returned. Known problems are missing location ID's or parameter ID's in the MON files.
...