What |
|---|
nameofinstance.xml |
Description |
|---|
Modify workflow run period based in a timeseries threshold |
schema location |
|---|
| Table of Contents |
|---|
| Tip |
|---|
Although this manual mentions the SOBEK model this module can be used for any external module (e.g. also ISIS) |
What is the WorkflowLooprunner?
...
As an example for configuring the WorkflowLoopRunner see Figure 4.
_Figure 4 : WorkflowLoopRunner with trigger option "value trigger"_
In the example file the trigger time series is Q.uh, the discharge at Lobith calculated from HBV. The relative view period is 14610 days (40 years). For each time interval the maximum value of the trigger time series will be defined. As value option "above" was chosen. The threshold value is 4000. The relative run window includes the period where the discharge at Lobith exceeds the threshold value as well as to days before and after that period.
Run Model for entire view period if pre-defined threshold is exceeded
Next to running the model for a relative run window with respect to
threshold values found in the relative view period of the indicated
timeSeriesSet, an option exsists run the model for the entire view period in
this event.
This implies that the relative run window is similar to the total relative
view period, independant of the instance at which the threshold value is
exceeded. This is illustrated in Figure 5.
Figure 5: Definition of the run window for the runPeriodOption alwaysFullPeriod="true".
This feature is enabled by setting the alwaysFullPeriod flag to true at
runPeriodOptions. This is illustrated in Figure 6.
_Figure 6: Run model for entire view period by selecting
alwaysFullPeriod="true"._