...
Now you see cross-section related to cross-section 2 and 3.
Working with Structures
The functionality of structures is under construction.
- Create a network with branches and a cross-sections on each branch.
- Select create weir from the structure tools.
- Click on a branch to create a weir.
- On another branch, put two weirs on the same location to create a compound structure.
- Select create pump from the structure tools.
- Click on another branch to create a pump.
The structures are added to the network. Now we can adjust the settings.*
- Click on the weir.
You , Now you see the cross-sectional view of the weir with closest the nearest cross-section in the background. The default settings of the weir are OK.
* The cross-sectional view cannot be displayed when there is no cross-section on the branch.
- Click on the compound structure
Now you You see the cross-sectional view of a compound structure with closest the nearest cross-section in the background. This compound structure consist of two weirs, but more weirs of or other structures can be added. The background is colored red as a warning, because the two weirs overlap. To adjust the weirs:
- Click on the weir in the cross-sectional view.
- Adjust the width of one weir in 50m.
- Click on the other weir in the cross-sectional view.
- Adjust the offset in 250m.
- Adjust the width in 50m.
The indication of overlapping structures (red background) is gone
...
To adjus the settings of the pump:
...
- Click on the pump
...
- .
- Deselect the control level on the delivery side.
- Adjust the control levels on the suction side in -4m for switch-on and -5 for switch-off.
structures
...
Import a network
This section describes two possibilities to import a network:
...