Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...


Delft-FEWS can export messages to the archive via the ArchiveExportModule (exportMessages activity).
For messages a dataset is generated for every area on a daily basis. The associated directory structure of the Delft-FEWS export for this type of dataset is as follows TO DO: FEWS-10198: update directory structure to above setup:.
<archiveRoot>/<yyyy>/<MM>/<areaId>/<dd>/messages/
The exportArchiveModule.xsd has a dedicated exportMessages section to configure the messages that need to be archived (see Figure 4.3). Currently only ForecasterNotes can be archived. Table 4.2 documents the associated elements:

Anchor
_Ref376780668
_Ref376780668
Table 4.2 Delft-FEWS export configuration for archiving messages

...


Delft-FEWS can export simulations to the archive via the ArchiveExportModule (exportSimulations activity). Typically this archiving activity is included in the workflow that computes the final approved forecast.
The associated root directory structure of the Delft-FEWS export for this type of dataset is as follows:
<archiveRoot>/<yyyy>/<MM>/<areaId>/<dd>/simulated/<workflowId><TimeZero><DispatchTime>
Where <dd> refers to the date of the forecast time T0.
This directory holds the metaData.xml as well as runInfo.xml file with the FEWS taskrun properties (see Figure 3.8). Within this directory the following sub-folders may exist:
/timeseries, /reports, /modifiers, /states
The exportArchiveModule.xsd has a dedicated exportSimulated section to configure the messages that need to be archived (see Figure 3.7). The associated specification is given in Table 4.4.

Anchor
_Ref376870700
_Ref376870700
Table 4.4 Delft-FEWS export configuration for archiving simulations

...


Delft-FEWS can export the current configuration to the archive via the ArchiveExportModule (exportConfig activity). The configuration thus is exported as part of the workflow. The associated root directory structure of the Delft-FEWS export for this type of dataset is as follows:
<archiveRoot>/<config>//<areaId>/<yyyymmdd>/
The date refers to the revision date of the configuration. The file name typically holds the revisionId.
The exportArchiveModule.xsd has a dedicated exportConfig section to setup the export of the Configuration (see Figure 4.6). This is due to be revised as the same relativePeriod based export mechanism should be adopted for checking what to export (see Table 4.5).

Anchor
_Ref376878184
_Ref376878184
Figure 4.6 Delft-FEWS export configuration for archiving configurations
Anchor
_Ref376880374
_Ref376880374
Table 4.5 Delft-FEWS export configuration for archiving a configuration

...