...
| Datasource name | Datasource code (ID) | Type | Original Interval | Available Parameter(s) [parameter code] | Remarks |
|---|---|---|---|---|---|
| Harmonie | Knmi.Harmonie | Model Grid, forecast | 1 hour | Air Pressure [AirPressure] | |
| HiRLAM | Knmi.Hirlam | Model Grid, forecast | 1 hour | Air Pressure [AirPressure] | |
| KNMI AWS 10 Minutes | Knmi.AwsTenMinutes | Scalar, observed | 10 minute | Air Pressure [AirPressure] | |
| KNMI Evaporation (From Meteobase) | Knmi.FromMeteobase.Evaporation | Scalar, observed | 1 day | Evaporation [Evaporation] | |
| KNMI Reference Evaporation | Knmi.Evaporation | Scalar, observed | 1 day | Evaporation [Evaporation] | |
| KNMI Iris Stations | Knmi.IrisValidated | Scalar, observed | 1 day | Precipitation [P] | |
| KNMI Naval Reports | Knmi.Naval.Forecasts | Report, observed | 1 day | Naval reports for warnings and forecasts [Naval.Reports] | |
| Real-time international radar composite product | Knmi.International.Radar.Composite | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. Product has no correction to data from meteo stations. |
| Early reanalysis international radar composite | Knmi.International.Radar.Composite.Early.Reanalysis | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. Product available after 24-48 hours to enable early correction to data from meteo stations. |
| Final reanalysis international radar composite | Knmi.International.Radar.Composite.Final.Reanalysis | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. Product available after 30 days to enable final correction to data from meteo stations. |
| KNMI Radar Uncorrected (Real time) | Knmi.Radar.Uncorrected | Grid, radar | 5 minute | Precipitation [P] | Grid definition required in grids.xml. See below for the configuration example. |
| KNMI Regional EPS | Knmi.RegionalEps | Ensemble Scalar, forecast | 6 hour | Dewpoint Temperature [DPT] | Note that the ensemble members 1-50 are the real ensemble, while member 51 and 52 are the control and deterministic runs. So it is advised to store the ensemble in a temporary ensembleId and to postprocess the members 1-50 to the real ensemble. |
| KNMI Synops | Knmi.Synops | Scalar, observed | 1 hour | Air Pressure [AirPressure] | |
| KNMI Synops (From Meteobase) | Knmi.FromMeteobase.Synops | Scalar, observed | 1 hour | Precipitation [P] | |
| KNMI Waqua TS | Knmi.WaquaTs | Model Scalar, forecast | 10 minute | Astronomical Tide [AstronomicalTide] | |
| KNMI Weather Warnings | Knmi.Warnings | Warning, observed | 1 hour | Heat warning [Warning.Heat] | |
| KNMI Water Setup EPS | Knmi.WaterSetupEps | Ensemble Scalar, forecast | 6 hour | Water Surge [WaterSurge] | |
| Meteobase Makkink Evaporation | Meteobase.Evaporation.Makkink | Grid, observed | 1 day | Evaporation [Evaporation] | |
| Meteobase Pennman-Monteith Evaporation | Meteobase.Evaporation.PennmanMonteith | Grid, observed | 1 day | Evaporation [Evaporation] | |
| Meteobase Precipitation | Meteobase.Precipitation | Grid, observed | 1 day | Precipitation [P] | |
| SATDATA Evapotranspiration | Satdata.Evapotranspiration.Reanalysis | Grid, observed | 1 day | Actual evapotranspiration [EvapotranspirationActual] Evapotranspiration shortage [EvapotranspirationShortage] |
Aggregated products
All data sources as in the table above have their original interval. If you want to import an aggregated product, the WIWB API supports that. You can aggregate every product with a multiplier of its original interval. The <timestep> configured in the Delft-FEWS import moduleInstance of that datasource will be interpreted whether you want to import the original or an aggregated product. E.g. the KNMI Radar products have an original interval of 5 minutes, so aggregation options are 10 minutes (2 x 5 minutes), 15 minutes (3 x 5 minutes) etc. As mentioned, the <timestep> definition in Delft-FEWS will be leading. Disaggregating is not supported.
...