...
It will read "ExtForceFileNew" value and "ExtForceFile" specifically for wind forcing.
| Code Block | ||
|---|---|---|
| ||
[external forcing] ExtForceFile = ExtForceFileNew = FlowFM_bnd.ext |
...
Other parameters like wind, precipitation and atmospheric pressure can be supplied by FEWS only for 2D using a netcdf export directly to the file-location the model expects the nc-file to be. In the model you can use the old-style ext format file (in mdu keyword ExtForceFile) to use these netcdf-files. How to do this can be found in the D-Flow FM manual.
Since 2022.02 there is support for windxy tim files. Only 1 timeseries for windspeed and 1 for winddirection are supported in the pi xml file. The adapter looks at the parameterIds "Windspeed" and "Winddirection" and replaces the whole tim file with the values from these timeseries including new timesteps referenced to the refdate in the mdu file. It is advised to set METHOD=7 in the .ext file for wind timeseries.
In the .mdu file itself it will replace Tstart, Tstop and RstInterval with the appropriate values.
...