Wanda is an advanced, interactive software package to support the hydraulic design process of your pipeline system. The program is used for the hydraulic analysis of steady and unsteady flow conditions in arbitrary configured pipeline networks.
Specific features:
...
Steady/nonSteady run
...
Wanda can be run in steady state or nonsteady state. In the steady state setting, every timestep will be treated as independent of the previous or following timestep. In the non-steady state, the model will perform as a hydraulic model where disturbances can run through the system. If a timestep in one of the input timeseries contains a missing value in steady state modus, that timestep will not be simulated and the adapter will continue to the next timestep. In non-steady state, the wanda adapter will exit with a warning message.
...
Pumploop
...
For specific purposes it can be handy to combine multiple model simulations in one run. This is the case where the actual functioning of a pump is simulated, which is influenced by the other pumps in the same system. In the GeneralAdapter it is configured as one run, but the Model Adapter will run Wanda X times (X is the number of the pumps in the Wanda model). Every run, all pumps will be given the parameter: loopChoiceInputParameterId (see section below), except the pump that is being simulated: this pump will get the other parameters (water level suction side, rpm). The result of this run will be the discharge for this pump. Looping this way through all pumps, the Module Adapter will collect the results for all pumps in the system and import it as the result of one model simulation.
Wanda adapter binary folder
...
- rootDir: folder where the Wanda model is located
- exportDir: folder where the Wanda input files should be stored
- exportIdMap: the idMapFile for the export to Wanda: the external ID's are the Id's in the WANDA model
- importDir: folder where Wanda stores the output
- importIdMap: the idMapFile for the import from Wanda: the external ID's are the Id's in the WANDA model
ExportActivities Section
Important for Wanda here are the properties of the exportRunFileActivity. These properties are the actual Wanda settings.
- key - runSteadyForEveryTimeStep: this setting can be true or false. If true, every timestep that is simulated is independent of every previous or following timestep. So every timestep is handled as a steady situation. If false, the model will run as a hydraulic model simulating a non-stationary situation.
- key - wdi: this setting contains the name and path of the actual Wanda model
- key - loopChoiceName (optional): required for pump loop setting
- key - loopChoiceInputParameterId (optional): required for pump loop setting
- key - loopChoiceSelectionIndex (optional): required for pump loop setting
ExecuteActivities Section
...