FAST
FAST is a two-dimensional model for tsunami calculations.
FAST Module Adapter
This page describes the FAST module adapter, its functions, and provides an example for configuring a FAST run in FEWS.
It only has a pre adapter since FAST generates output that is already readable by FEWS.
FAST adapter
Model adapter for running a FAST model from Delft-FEWS.
Class names:
nl.deltares.fast.FastPreAdapter
nl.deltares.fast.FastPostAdapter
Notes for users
FastPreAdapter
- For all files that are written by this adapter, if the file to be written already exists, then it will be overwritten.
- This program writes log messages to log file called Fast_Pre_Adapter.log.
- This program uses the information in the specified netcdf run file as input and uses this information to do the following:
- Replace the tag $WAVE_HEIGHT$ in template file (cil0_30mv3_TEMPLATE.xyz) with a wave height value from FEWS.
FastPostAdapter
- For all files that are written by this adapter, if the file to be written already exists, then it will be overwritten.
- This program writes log messages to log file called Fast_Post_Adapter.log.
- Converts model output (cil0_30mv3_out.asc) in esri grid format to fews netcdf grid format for T0.
System requirements
- The model needs Matlab Compiler runtime 2013b x64 v8.2 to be installed
- The adapter needs Java version 1.7 or higher.
- The adapter needs the following Java libraries:
- castor-0.9.5.jar
- commons-httpclient-3.0.1.jar
- Delft_Util.jar
- fews-FAST-adapter.jar
- log4j-1.2.14.jar
- netcdf-4.2.jar
- slf4j-api-1.5.6.jar
- slf4j-log4j12-1.5.6.jar
- xercesImpl.jar
Example configuration
A complete example model run configuration file can be found here: FastAdapterRun.xml
Start up activities
As a first activity it can be useful to delete all files present in the workDir, if for example it would be filled with files from a previous run.
<startUpActivities> <purgeActivity> <filter>workDir*</filter> </purgeActivity> </startUpActivities>
Export activities
The first steps in the general adapter run are the data set, netcdf and run file export activities. The <exportDataSetActivity> will extract a zip file with the module instance id as file name located in "Config\ModuleDataSetFiles\" of the FEWS environment to the workdir. The <exportNetcdfActivity> will be a netcdf file which can have any name containing a variable called wave_height which has exactly one value. The <exportNetcdfRunFileActivity> will be a netcdf run file that contains information needed by the pre adapter. The information will be automatically filled by the general adapter.
<exportActivities> <exportDataSetActivity> <moduleInstanceId>Run_FAST</moduleInstanceId> </exportDataSetActivity> <exportNetcdfActivity> <exportFile>wave_height.nc</exportFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>Run_FAST</moduleInstanceId> <valueType>scalar</valueType> <parameterId>WaveHeight</parameterId> <locationId>Dummy</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="hour"/> <relativeViewPeriod unit="hour" start="0" end="0"/> <readWriteMode>add originals</readWriteMode> </timeSeriesSet> </timeSeriesSets> </exportNetcdfActivity> <exportNetcdfRunFileActivity> <description>This run file is passed as argument to FastPreAdapter</description> <exportFile>run.nc</exportFile> </exportNetcdfRunFileActivity> </exportActivities>
Execute activities
The next steps are the execute activities.
The first will be the pre adapter. This program will read the run.nc input file and use the contents for instructions on which directory and files should be used to convert to the correct FAST input format. The Pre adapter generates a log file called fast_pre_adapter.log, which can be read into FEWS by coupling line patterns to FEWS log messages.
The second execute activity will be the module run.
The third execute activity will be the post adapter.
<executeActivities> <executeActivity> <command> <className>nl.deltares.fast.FastPreAdapter</className> <binDir>adapter\bin</binDir> </command> <arguments> <argument>run.nc</argument> </arguments> <logFile> <file>Fast_Pre_Adapter.log</file> <errorLinePattern>ERROR*</errorLinePattern> <warningLinePattern>WARN*</warningLinePattern> <infoLinePattern>INFO*</infoLinePattern> <debugLinePattern>DEBUG*</debugLinePattern> </logFile> <timeOut>99999999</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <command> <executable>FASTrun.exe</executable> </command> <arguments> <argument>cil0b2</argument> <argument>cil0_30mv3</argument> </arguments> <timeOut>99999999</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <command> <className>nl.deltares.fast.FastPostAdapter</className> <binDir>adapter\bin</binDir> </command> <arguments> <argument>run.nc</argument> </arguments> <logFile> <file>Fast_Post_Adapter.log</file> <errorLinePattern>ERROR*</errorLinePattern> <warningLinePattern>WARN*</warningLinePattern> <infoLinePattern>INFO*</infoLinePattern> <debugLinePattern>DEBUG*</debugLinePattern> </logFile> <timeOut>99999999</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> </executeActivities>
Wave height input file
Th exported netcdf file with the wave height will be used to write the wave height to cil0_30mv3.xyz by replacing the tag $WAVE_HEIGHT$ in cil0_30mv3_TEMPLATE.xyz:
108.34958333 -7.83289859 $WAVE_HEIGHT$ 900 1 108.35411600 -7.83289136 $WAVE_HEIGHT$ 900 1 108.35859257 -7.83344007 $WAVE_HEIGHT$ 900 1 108.36302258 -7.83258101 $WAVE_HEIGHT$ 900 1 108.36729527 -7.83112279 $WAVE_HEIGHT$ 900 1 108.37134559 -7.82910962 $WAVE_HEIGHT$ 900 1 108.37528703 -7.82689069 $WAVE_HEIGHT$ 900 1 108.37936617 -7.82496548 $WAVE_HEIGHT$ 900 1 108.38335489 -7.82662508 $WAVE_HEIGHT$ 900 1 108.38745431 -7.82846972 $WAVE_HEIGHT$ 900 1
By replacing $WAVE_HEIGHT$ with value 5 cil0_30mv3.xyz will be:
108.34958333 -7.83289859 5.00 900 1 108.35411600 -7.83289136 5.00 900 1 108.35859257 -7.83344007 5.00 900 1 108.36302258 -7.83258101 5.00 900 1 108.36729527 -7.83112279 5.00 900 1 108.37134559 -7.82910962 5.00 900 1 108.37528703 -7.82689069 5.00 900 1 108.37936617 -7.82496548 5.00 900 1 108.38335489 -7.82662508 5.00 900 1 108.38745431 -7.82846972 5.00 900 1
Executing model run
The next activity will be executing the FAST model run. This is done by running FASTrun.exe in the workdir containing the model files with the input file names as arguments. The model creates the output file cil0_30mv3_out.asc which contains the grid information for FEWS.
<executeActivity> <command> <executable>FASTrun.exe</executable> </command> <arguments> <argument>cil0b2</argument> <argument>cil0_30mv3</argument> </arguments> <timeOut>99999999</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity>
Executing post adapter
The post adapter converts model output (cil0_30mv3_out.asc) in esri grid format to fews netcdf grid format for T0. The name of the netcdf file will be the name configured for the netcdf import activity which is stored in the netcdf run file.
The post adapter writes log messages to log file called Fast_Post_Adapter.log which can be read into FEWS by coupling line patterns to FEWS log messages.
<executeActivity> <command> <className>nl.deltares.fast.FastPostAdapter</className> <binDir>adapter\bin</binDir> </command> <arguments> <argument>run.nc</argument> </arguments> <logFile> <file>Fast_Post_Adapter.log</file> <errorLinePattern>ERROR*</errorLinePattern> <warningLinePattern>WARN*</warningLinePattern> <infoLinePattern>INFO*</infoLinePattern> <debugLinePattern>DEBUG*</debugLinePattern> </logFile> <timeOut>99999999</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity>
Importing post adapter output
The last part of the general adapter run is importing the post adapter output.
<importActivities> <importNetcdfActivity> <importFile>postAdapterOutput.nc</importFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>Run_XBeach</moduleInstanceId> <valueType>grid</valueType> <parameterId>H_max</parameterId> <locationId>Fast</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="nonequidistant"/> <readWriteMode>read complete forecast</readWriteMode> </timeSeriesSet> </timeSeriesSets> </importNetcdfActivity> </importActivities>