Keywords
Place keywords here
Summary
Place summary here
References
Place references here

Contents
1 Start here

General

Introduction

Write latest

Lay-out

Copy from Wiki

Top menu

Copy from Wiki

Supported models

Delft3D-flow

x

Delft3D-wave

x

D-Flow FM

x

XBeach

x

Code structure

x

Toolboxes

Model maker

Introduction

This tool allows the user setting-up or refining in few clicks an existing model. In particular, the following operations can be performed within Delft Dashboard:

• Create or refine a computational grid ("*. grd" file)
• Extract and interpolate bathymetry data from open source on-line databases on the computational grid ("*.dep" file).
• Extract and interpolate tidal boundary conditions from open source on-line databases on the computational grid, creating boundary conditions for the model ("*.bnd" file).

Delft Dashboard contains a number of Tabs, which can be used to specify additional information to the model. The model can then be used directly to carry out hydrodynamics, waves, morphodynamics or water quality computations.
Desribe the 'quick mode' and other options

Make rectuanglar grid

After the grid outline is defined within the interface of Delft Dashboard the user can click on 'Create grid'. The following routines will then be called:

1. Determine the
2. Create a grid between these points
3. Delete the grid cells which are not needed because it is above a certain bed level.
   1. This bed level can be specified in z max [m]
   2. The bed level used to check the bed level with the maximum bed level is the bathymetry which is active in Delft Dashboard. The bathymetry can be changed in the top panel with 'Bathymetry'

Make bathymetry

X
Also the option 'Batymetry'

Make open boundary

X

Create boundary

X

Others

Initial condtioons
Roughness

Bathymetry

X

Validation cases