Available since 2019.01.
This parser can import NetCDF grid data files from: https://tds.hycom.org/thredds/catalog/GLBv0.08/expt_93.0/data/forecasts/catalog.html?dataset=GLBv0.08/expt_93.0/data/forecasts/FMRC_best.ncd
It offers a maximum 1.000.000.000 data points per set. Files larger than than cannot be downloaded. Grids should be configured to stay under that limit.
Configuration example:
Parameters:
vertical_Coordinate: configure only if the requested data set contains vertical (z) coordinates (layers). If configured only the chosen layer will be imported. There should be less than 1000 layers. If the data set contains layers but vertical_Coordinate is not configured, all layers will be imported.
horizontal_Stride: default setting is 1. Needs to be configured only f a different value is needed.
time_Stride : default setting is 1. Needs to be configured only f a different value is needed.TIME_ZERO is the time the forcast was created. Can be replaced by actual time in the following format: FMRC_RUN_2019-02-23T12:00:00Z.
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSpy v2009 sp1 (http://www.altova.com) by ICT (Stichting Deltares) -->
<timeSeriesImportRun xmlns="http://www.wldelft.nl/fews" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.wldelft.nl/fews http://fews.wldelft.nl/schemas/version1.0/timeSeriesImportRun.xsd">
<!--Surface currents-->
<import>
<general>
<importType>Hycom_netcdf</importType>
<serverUrl>http://ncss.hycom.org/thredds/ncss/GLBv0.08/expt_93.0/data/forecasts/runs/FMRC_RUN_%TIME_ZERO(yyyy-MM-dd'T'HH:mm:ss'Z')%</serverUrl>
<relativeViewPeriod unit="day" start="0" end="8" startOverrulable="true"/>
<idMapId>IdImport_HYCOM</idMapId>
<maximumVerticalSnapDistance>0.1</maximumVerticalSnapDistance>
<missingValue>-999</missingValue>
<importTimeZone>
<timeZoneOffset>+00:00</timeZoneOffset>
</importTimeZone>
<dataFeedId>HYCOM</dataFeedId>
</general>
<properties>
<double key="vertical_Coordinate" value="1"/>
<bool key="add_latitude_longitude" value="true"/>
<bool key="disable_Project_Subset" value="true"/>
<int key="horizontal_Stride" value="1"/>
<int key="time_Stride" value="1"/>
</properties>
<timeSeriesSet>
<moduleInstanceId>Import_HYCOM_Currents</moduleInstanceId>
<valueType>grid</valueType>
<parameterId>C.simulated.u</parameterId>
<locationSetId>HYCOM.ArabianSea_AllLayers</locationSetId>
<timeSeriesType>external forecasting</timeSeriesType>
<timeStep unit="hour" multiplier="3"/>
<readWriteMode>add originals</readWriteMode>
<synchLevel>6</synchLevel>
<expiryTime unit="day" multiplier="30"/>
</timeSeriesSet>
<timeSeriesSet>
<moduleInstanceId>Import_HYCOM_Currents</moduleInstanceId>
<valueType>grid</valueType>
<parameterId>C.simulated.v</parameterId>
<locationSetId>HYCOM.ArabianSea_AllLayers</locationSetId>
<timeSeriesType>external forecasting</timeSeriesType>
<timeStep unit="hour" multiplier="3"/>
<readWriteMode>add originals</readWriteMode>
<synchLevel>6</synchLevel>
<expiryTime unit="day" multiplier="30"/>
</timeSeriesSet>
</import>
</timeSeriesImportRun>
The importer module should be registered in FEWS Config/RegionConfigFiles/ModuleInstanceDescriptors.xml. Locations of the wanted time series should be registered in Config/RegionConfigFiles/Locations.xml. Parameters should be registered in Config/RegionConfigFiles/Parameter.xml. The workflow should be registered in Config\RegionConfigFiles\WorkflowDescriptors.xml.
A grid needs to be configured in the Config/RegionConfigFiles/Grids.xml file. Location id of the grid and the time series configured in import should be the same.
