Wavewatch 3 Module Adapter
This page describes the WW3 module adapter, its functions, and provides an example for configuring a WW3 run in FEWS.
WW3 pre-adapter
Model pre-adapter for running a Wavewatch 3 model from Delft-FEWS.
Class name: nl.deltares.wavewatch.PreWWIIIAdapter
Properties
TIMESTEP |
(required) |
Time step (in seconds) of the WW3 model as defined in the model output file. This field is required to calculate the number of time steps to be written to the output file as a function of the run time length. Thus, the number of output time steps is equal to the number of model time steps. |
---|
Notes for users
- For all files that are written by this adapter, if the file to be written already exists, then it will be overwritten.
- This program assumes that the model always runs in time zone GMT.
- This program writes log messages to a log file called preww3.log.
- This program uses the information in the specified netcdf run file as input and uses this information to do the following actions:
- Copy template file ww3_shell.template to create the shell input file ww3_shell.inp
- Copy template file gx_outf.template to create the grid output post-processing file: gx_outf.inp
- Copy template file ww3_out.template to create the point output post-processing file: ww3_out.inp
In the input files the following tags will be replaced with the corresponding values:$STARTTIME$
Start time of the model run.
$ENDTIME$
End time of the model run.
$TIMESTEP$
Time step of the model in seconds
$NSTEP$
Number of time steps to write as output calculated as a function of STARTTIME, ENDTIME, and TIMESTEP.
System requirements
- This program needs Java version 1.7 or higher.
- This program needs the following Java libraries:
- castor-0.9.5.jar
- commons-httpclient-3.0.1.jar
- Delft_FEWS.jar
- Delft_FEWS_DataStore.jar
- Delft_PI.jar
- Delft_PI_castor.jar
- Delft_Util.jar
- fews-wavewatch-adapter.jar
- grib-8.0
- log4j-1.2.14.jar
- netcdf-4.2.jar
- slf4j-api-1.5.6.jar
- slf4j-log4j12-1.5.6.jar
- TimeSeriesImport.jar
- xercesImpl.jar
SWAN post-adapter
Model post-adapter for running a Wavewatch 3 model from Delft-FEWS.
Class name: nl.deltares.wavewatch.PostWWIIIAdapter
Notes for users
- For all files that are written by this adapter, if the file to be written already exists, then it will be overwritten.
- This program assumes that the model always runs in time zone GMT.
- This program writes log messages to a log file called postww3.log.
System requirements
- This program needs Java version 1.7 or higher.
- This program needs the following Java libraries:
-
- castor-0.9.5.jar
- commons-httpclient-3.0.1.jar
- Delft_FEWS.jar
- Delft_FEWS_DataStore.jar
- Delft_PI.jar
- Delft_PI_castor.jar
- Delft_Util.jar
- fews-wavewatch-adapter.jar
- grib-8.0
- log4j-1.2.14.jar
- netcdf-4.2.jar
- slf4j-api-1.5.6.jar
- slf4j-log4j12-1.5.6.jar
- TimeSeriesImport.jar
- xercesImpl.jar
generalAdapterRun Example Configuration
The following gives an example of how to set up the GeneralAdapterRun file for Wavewatch 3 in FEWS using the WW3 model pre and post-adapters. The GeneralAdapterRun file follows the general structure as described here.
general
In this section general information regarding the module such as version number, file directories, missing values, and time zone information can be specified.
<general> <description>WaveWatch Model run</description> <piVersion>1.8</piVersion> <rootDir>%REGION_HOME%/Modules/WavewatchIII/$MODEL$/$METEO$_hindcast</rootDir> <workDir>%ROOT_DIR%/workDir</workDir> <exportDir>%ROOT_DIR%/input</exportDir> <exportDataSetDir>%ROOT_DIR%/</exportDataSetDir> <exportIdMap>IdExport_wavewatchIII</exportIdMap> <importDir>%ROOT_DIR%/output</importDir> <importIdMap>IdImport_wavewatchIII</importIdMap> <dumpFileDir>$GA_DUMPFILEDIR$</dumpFileDir> <dumpDir>%ROOT_DIR%/diagnostics/</dumpDir> <diagnosticFile>%ROOT_DIR%/diagnostics/diagnostics.xml</diagnosticFile> <missVal>NaN</missVal> <timeZone> <timeZoneName>GMT+0:00</timeZoneName> </timeZone> </general>
startUpActivities
It may be useful to clear the model working directory of any previous runs before starting a new run.
<startUpActivities> <purgeActivity> <filter>%ROOT_DIR%/workDir/*</filter> </purgeActivity> </startUpActivities>
exportActivities
In this section the data to be exported from FEWS as input to the module is specified. Data to export to WW3 generally includes:
- Model state
- Model data set
- Input data (i.e. wind, water levels, wave spectra)
- Run file
The run file contains information regarding the input file names, start and stop times, and time step. Additional properties can be passed using the run file as listed above under Properties.
<exportActivities> <exportStateActivity> <moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId> <stateExportDir>%ROOT_DIR%/stateInput</stateExportDir> <stateSelection> <warmState> <stateSearchPeriod unit="hour" start="-72" end="-24"/> </warmState> </stateSelection> </exportStateActivity> <exportDataSetActivity> <moduleInstanceId>WavewatchIII_$MODEL$_$METEO$</moduleInstanceId> </exportDataSetActivity> <exportNetcdfActivity> <exportFile>$METEO$.nc</exportFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>Import_$METEO$</moduleInstanceId> <valueType>grid</valueType> <parameterId>Wind.u.simulated</parameterId> <locationId>$METEO$</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="hour" multiplier="3"/> <relativeViewPeriod unit="day" start="-3" end="0"/> <readWriteMode>read only</readWriteMode> </timeSeriesSet> <timeSeriesSet> <moduleInstanceId>Import_$METEO$</moduleInstanceId> <valueType>grid</valueType> <parameterId>Wind.v.simulated</parameterId> <locationId>$METEO$</locationId> <timeSeriesType>external historical</timeSeriesType> <timeStep unit="hour" multiplier="3"/> <relativeViewPeriod unit="day" start="-3" end="0"/> <readWriteMode>read only</readWriteMode> </timeSeriesSet> </timeSeriesSets> </exportNetcdfActivity> <exportNetcdfRunFileActivity> <exportFile>%ROOT_DIR%/runinfo.nc</exportFile> <properties> <string value="3600" key="TIMESTEP"/> </properties> </exportNetcdfRunFileActivity> </exportActivities>
executeActivites
This section calls the WW3 pre and post-adapters as well as the WW3 executables. Note that the run file must be passed as an argument to the WW3 pre and post-adapters. Also note that several executable must be called in the following order:
- ww3_grid.exe (grid pre-processing)
- ww3_prep.exe (processes wind field data)
- ww3_shell.exe (model executable)
- gx_outp.exe (grid post-processing)
- ww3_outp.exe (processes and writes output)
<executeActivities> <executeActivity> <description>WavewatchIII Pre Adapter</description> <command> <className>nl.deltares.wavewatch.PreWWIIIAdapter</className> <binDir>%ROOT_DIR%/../../../bin/WavewatchIII_adapter</binDir> </command> <arguments> <argument>%ROOT_DIR%/runinfo.nc</argument> </arguments> <timeOut>10800000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <description>ww3_grid</description> <command> <executable>%ROOT_DIR%/../../../bin/WavewatchIII/ww3_grid.exe</executable> </command> <timeOut>90000000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <description>ww3_prep</description> <command> <executable>%ROOT_DIR%/../../../bin/WavewatchIII/ww3_prep.exe</executable> </command> <timeOut>90000000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <description>ww3_shel</description> <command> <executable>%ROOT_DIR%/../../../bin/WavewatchIII/ww3_shel.exe</executable> </command> <timeOut>90000000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <description>Run WavewatchIII</description> <command> <executable>%ROOT_DIR%/../../../bin/WavewatchIII/gx_outf.exe</executable> </command> <timeOut>90000000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <description>Collect output WavewatchIII</description> <command> <executable>%ROOT_DIR%/../../../bin/WavewatchIII/ww3_outp.exe</executable> </command> <timeOut>90000000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> <executeActivity> <description>WavewatchIII Post Adapter</description> <command> <className>nl.deltares.wavewatch.PostWWIIIAdapter</className> <binDir>%ROOT_DIR%/../../../bin/WavewatchIII_adapter</binDir> </command> <arguments> <argument>%ROOT_DIR%/runinfo.nc</argument> </arguments> <timeOut>10800000</timeOut> <ignoreDiagnostics>true</ignoreDiagnostics> </executeActivity> </executeActivities>
importActivities
In this section the data to be imported into FEWS as output from the module is specified. Data to import from WW3 generally includes:
- Model state
- Output data (i.e. wind, water levels, wave spectra)
<importActivities> <importStateActivity> <stateFile> <importFile>%ROOT_DIR%/workDir/restart1.ww3</importFile> <relativeExportFile>restart.ww3</relativeExportFile> </stateFile> <expiryTime unit="day" multiplier="3"/> </importStateActivity> <importNetcdfActivity> <importFile>ww3.nc</importFile> <timeSeriesSets> <timeSeriesSet> <moduleInstanceId>$MODULE_INSTANCE_ID$</moduleInstanceId> <valueType>scalar</valueType> <parameterId>Wave.variancedensity2D.simulated</parameterId> <domainParameterId>f</domainParameterId> <domainParameterId>dir</domainParameterId> <locationSetId>wavewatchIII</locationSetId> <timeSeriesType>simulated historical</timeSeriesType> <timeStep unit="hour"/> <readWriteMode>add originals</readWriteMode> </timeSeriesSet> </timeSeriesSets> <maximumSnapDistance>100</maximumSnapDistance> </importNetcdfActivity> </importActivities>