Introduction
Empty
Model maker
The toolbox Model Maker has two functions which can be used for all models supported (Delft3D-FLOW, Delft3D-WAVE, D-FLOW FM and XBeach) which makes it easy to set-up a rectangular grid and a matching bathymetry. For FLOW also functionality related to boundary conditions and roughness is implemented.
1) Make a rectangular grid
A rectangular grid can be created for every model supported by Delft Dashboard. The basic procedure will contain of three steps.
1) All the relevant variables (grid orientation, resolution) are loaded from the interface in Dashboard (so-called handles).
2) Creation of a full grid based on the active bathymetry (often GEBCO '08). This full grid will have a margin of 20 percentile and is thus larger than the grid defined in Dashboard. This is done in order to overcome interpolation issues. This full grid will also have a bathymetry in order to determine where the grid needs to be cut-off based on the maximum height (Z Max) described in Dashboard. This step is carried out by the function ddb_ModelMakerToolbox_makeRectangularGrid.
3) The final grid is created based on this larger grid. Rotation is taken into account and cells above a certain threshold (Z max) are deleted. This step is carried out by the function MakeRectangularGrid.
2) Make a bathymetry
Empty
3) Make open boundaries
Empty
4) Make Boundary Conditions
Empty