Delft3D Menu and Working Space

Toolbox

To perform a number of operations according to the Toolbox selected from the Toolbox tab in the Top Menu.  

Description

To add a description to the MDF file i.e. to describe the purpose of the present model.

Domain

The data Group Domain contains the following sub-data groups in the Working Space: Grid, Bathymetry, Dry Points, Thin Dams, Structures.

• ButtoGrid is used to "Open a grid" file (.grd) and "Open a Grid enclosure " file (.enc). The "number of layers" on the vertical  is also defined, as well as their vertical spacing in percentage with respect to the total depth. Both, "Sigma layers" and "Zeta layers" are supported. In case of Sigma layers it is also possible to specify the thickness (in m) of the top and bottom layer ("Z top" and "Z bottom"). The "Latitude" of the grid used to compute the Coriolis force can also be specified. "Orientation" defines the grid orientation as the angle between the true North and the y-axis of the Cartesian co-ordinate system.
• Bathymetry loads an existing depth file or it is used to define a bathymetry with a uniform water depth.
• Dry Points add dry points (*.dry) to the model using mouse click or from external file. These points will be permanently dry during a computation, irrespectively of the local water depth.
• Thin Dams add thin dams (*.thd) to the model domain using mouse click or from external file. The purpose of thin dams is to represent small obstacles (e.g. breakwaters, dams) in the model prohibiting flow between cells adjacent to them.

Time Frame

Defines the relation between the time axis of the real world (absolute time) and that of the simulation (relative time). "Reference Date" defines the arbitrary time t = 0 for all the time series computed by the simulation. "Start Time" and "Stop Time" defines start time and end time of the simulation. "Time Step" defines the Time step (in minutes) used in the computation. "Time Zone" defines the time difference between local time and GMT time and it is used to determine the phases in the local time of the tidal components when tide generating  forces are included in the simulation.

Processes

The data Group Processes contains the following sub-data groups in the Working Space: Constituents, Physical, Anthropogenic. 
 Constituents: to include "Salinity", "Temperature", dispersion of "Pollutants and tracers" and transport of cohesive and/or non-cohesive "Sediment" in the simulation. For "Pollutants and tracers" and "Sediment" processes the name of constituents need to be added. 
 Physical: to include the effect of Wind, Waves and Secondary Flows. Not yet implemented.
 Anthropogenic (Dredging and Dumping). Not yet implemented.
The data Group Processes contains the following sub-data groups in the Working Space: Constituents, Physical, Anthropogenic. 

• Constituents: to include "Salinity", "Temperature", dispersion of "Pollutants and tracers" and transport of cohesive and/or non-cohesive "Sediment" in the simulation. For "Pollutants and tracers" and "Sediment" processes the name of constituents need to be added. 
• Physical: to include the effect of Wind, Waves and Secondary Flows. Not yet implemented.
• Anthropogenic (Dredging and Dumping). Not yet implemented.

Initial Conditions

To specify the initial values the computation will start with. Initial conditions are required for all processes specified under the Tab Processes. A number of options can be selected: "Uniform Values" to impose a constant value, "Initial Condition File", "Restart File", and "Map File" to impose a value from external file.

Boundaries

To define the open boundaries, their location, type and other parameters describing them. Boundary conditions are stored in the ".bnd" file. The following "Type" of boundary conditions are available: "Water level", "velocity", "Neumann" (water level gradient), "discharge" or flux (total or per grid cell), "Riemann" (or weakly reflective boundary). Each boundary is identified by its "Name", start and end coordinates ("M1", "N1"; "M2", "N2"), reflection coefficient ("Alpha"), type of forcing ("Astronomic", "Harmonic", "Time-series", "Q-H relation"). Moreover, the vertical profile for hydrodynamics can be selected between one of them: "Uniform", "Logarithmic", "Per Layer". This last choice does not apply for "Water Level" or "Neumann: controlled boundary sections, neither for a depth-averaged simulation.

Physical Parameters

To select or specify a number of parameters related to the physical conditions of the model area. The data Group Physical parameters contains the following sub-data groups in the Working Space: Constants, Roughness, Viscosity, Sediments, Morphology, Heat Flow, Wind. The  tabs for Constants, Roughness and Viscosity are always visible. The other tabs are only visible if the associated processes are switched on. 

• Constants: to define values for: "Gravity", "Water Density", "Air Density". 
• Roughness: to specify the bottom roughness and the roughness of the side walls.
• Viscosity: to specify values for background horizontal and vertical eddy viscosity and diffusivity. Viscosity and diffusivity calculated with the Horizontal Large Eddy Simulation ("HLES") can be added to it. For a 3D simulation, the vertical turbulent eddy viscosity and diffusivity which is added to the background value, is computed with one of the following models: "Constant", "Algebraic", "k-L", "k-epsilon"
• Sediments: To specify sediment characteristics, in case you have "Sediment" switched on among the Processes. Sediment characteristics can be read from or saved to "*.sed" file.
• Morphology: To specify parameters for bed-update and carry out a full morphodynamic simulation.
• Heat Flux: Not yet implemented in Delft Dashboard.
• Wind: To add a wind field in case you have "Wind" switched on among the Processes. A wind field can be saved to a "*.wnd" file.

Numerical Parameters

To specify parameters related to drying and flooding and some other advanced options for numerical approximations.