...
Using this button shows longitudinal profile markers.
showStatistics
Button with icon:
Using this button shows the basic statistics panel.
showLookupTable
Drop-down button with icon:
Button to control the lookup tables / rating curves. This button is automatically made invisible when no lookup table config file is available, nor a rating curve stage / discharche parameter are configured (in Parameters.xml). The button will also automatically be disabled (still visible but not clickable) if the current data selection does not contain a lookup table / rating curve.
rotateChartAndTable
Button with icon:
Using this button toggles splitter (splitting the table and chart panel) orientation between vertical and horizontal.
zoomIn
Drop-down button with icon:
Using this button zooms in on the timeseries, reducing the view period length.
zoomOut
Button with icon:
Using this button zooms out on the timeseries, increasing the view period length.
zoomToDefault
Button with icon:
Using this button restores initial zoom (used when opening the TSD).
selectPreviousZoomLevel
Button with icon:
Using this button returns to the previous zoom level.
selectNextZoomLevel
Button with icon:
Using this button forwards to the next zoom level.
moveBackOneViewPeriod
Button with icon:
Using this button moves the view period backward with the entire length of the current view period.
moveBackHalfViewPeriod
Button with icon:
Using this button moves the view period backward with the half of the length of the current view period.
moveForwardHalfViewPeriod
Button with icon:
Using this button moves the view period forward with the half of the length of the current view period.
moveForwardOneViewPeriod
Button with icon:
Using this button moves the view period forward with the entire length of the current view period.
showAllData
Button with icon:
Using this button zooms to show the entire time series.
switchReferenceLevel
Regular or drop-down button with icon:
Using this button changes the values (i.e. water level) reference level to a global or local level.
setViewPeriod
Drop-down button with icon:
Using this button sets the view period; the section of a timeseries that is shown in the chart and table panel.
copyTimeSeries
Button with icon:
Using this button copies the selected timeseries.
pasteTimeSeries
Drop-down button with icon:
Using this button pastes the copied timeseries.
lockSelection
Button with icon:
Using this button locks the selected timeseries and view period. If unlocked, the timeseries and view period can (context dependent) be changed from outside the TSD.
runWorkflow
Button with icon:
Using this button saves changes to the timeseries and runs the workflow.
undoTimeSeriesChanges
Button with icon:
Using this button reverses modifications done to the timeseries.
saveTimeSeriesChanges
Button with icon:
Using this button saves changes to the timeseries.
setTimeSeriesEditableByClicking
Drop-down button with icon: or depending on which graphical edit mode is currently selected.
Using this button enables editing timeSeries by clicking on them.
Clicking the arrow symbol next to the button icon will open a drop-down menu:
useGraphicalEditorMovePointMode
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Adjust the shape of the time series by dragging a selected point".
Using these buttons switches to the mode where points can be freely moved.
useSetToMissingBetweenSelectedPointsMode
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Set the value between selected points to missing".
Using these buttons switches to the mode where missings are added in between points.
useInterpolateBetweenSelectedPointsMode
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Linear interpolate between selected points".
Using these buttons switches to the mode where points are interpolated between existing points.
useGraphicalEditorQuadraticInterpolationMode
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Quadratic interpolate between selected points".
Using these buttons switches to the mode where points are interpolated between existing points quadratically
useGraphicalEditorVerticalMoveMode
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Move the time series vertically".
Using these buttons switches to the mode where points can only be moved vertical (in value).
useNoGraphicalEditMode
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "No graphical edit mode selected".
Using these buttons disables editing.
selectPoints
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Select points".
Using this button selects a predetermained point selection.
deselectPoints
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "De-select points".
Using this button deselects all points.
selectOrDeselectPoint
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Select time step".
Using this button toggles selection of the point under the cursor.
openManualEditor
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Open editor".
Using this button show a pop-up in which numerical adjustments can be made.
moveHighLightedTimeStepToLeft
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Go to the previous selected time step".
Using this button highlights the first point to the left which is selected.
moveHighLightedTimeStepToRight
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Go to the next selected time step".
Using this button highlights the first point to the right which is selected.
moveTimeCursorToLeft
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Go to the previous time step".
Using this button highlights the first point to the left of the current point.
moveTimeCursorToRight
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Go to the next time step".
Using this button highlights the first point to the right of the current point.
increaseValue
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Increase value".
Using this button increases the currently selected point.
decreaseValue
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Decrease value".
Using this button decreases the currently selected point.
undoEdit
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Undo modifications made in the chart/table".
Using this button reverts the last change.
cancelEdit
Menu-item in the setTimeSeriesEditableByClicking drop-down menu with icon and label "Cancel edit".
Using this button reverts all changes.
showThresholdWarningLevels
...