...
Files following the gridDisplay.xsd need to be placed in the DisplayConfigFiles folder and can be referenced in the explorerTask using the displayConfigFileName. If desired gridPlotGroup-specifications can be placed in separate files following the gridPlotGroups.xsd while referencing the gridPlotGroupId in the gridDisplay (available since 2019.02). Since 2020.02, GridPlots with empty locationsets are automatically hidden. Users are informed with an info message.
Figure 143 Example of a configuration of the Grid Display
...
Additional timeSerieSet to link the sigma layers in a 3D model to indexed layers. For this you also need a locationSet linking a parentLocation to all sigma layers. Each sigma layer is linked to an index in a MapLayerFile. The parentLocation needs to be defined in Location.xml, linked to a grid definition in Grids.xml. See for a full config example Sigmalayers - display D-FlowFM 3D results in GridDisplay.
Display true color imagery
...
Available since: version 2019.02, patch #93400
...
By specifying a (3 bands) red, green and blue time series sets that provide values between 0..255 you can store and show true color satellite images as a grid time series. There is no need to configure classbreaks. You can change the brightness and contrast for each color channel separately. The incrementer changes the brightness and the multiplier the contrast of the color channel. When the incrementer + multiplier * value exceeds 255 it is it set to 255, when the result is negative the color channel is set to 0. Since the 2020.02 it is possible to display a true color image and a normal grid with a legend at the same time.
...