...
| No Format |
|---|
Date Time TN-1 QF-1 TN-2 QF-2 TN-3 QF-3 TN-N QF-N DataType date time float Char(1) float Char(1) float Char(1) float Char(1) DataFormat ddmmyyyy hh:mm xxxx.xxxxxx xxxx.xxxxxx xxxx.xxxxxx xxxx.xxxxxx |
NOTE : +
- All the columns in text file will be separated by comma(,) character
...
- Value of all the Columns contains the Rain Fall value for that particular time interval.
This rain fall value is derive from current (raw accumulated pulse) value - previous (raw accumulated pulse) value,
in other words the rain fall (in mm) within that time interval (i.e. 10 mins).
...
- Definition of the Data quality flags(QF) as listed below;
F
Telemetry Failed
N
Telemetry Normal
M
ManuallySet ( value set by the opeartor)
B
Blocked ( alarm disabled by the operator )
C
Calculation Failure
...
- Name of the text file will be 'yyyymmddhhmm_PARAMETER'
Eg. 200703121500_RF+
- TN stands for TagName (parameter name) which defined in the SCADA System. Also user can customise the TN which may different from the SCADA System