Page History

example_unstructured_grid_config.zip

DELFT-FEWS is a location oriented system. All time series data must be referenced to a (geographic) location. Scalar time series need no additional information. For grid time series data, each point in the grid must be referenced to a location in a grid structure.

...

In irregular grids the grid has a fixed number of rows and columns, but the cell height and width is not equal in each row and column. For these grids additional information is required on the location of each individual cell in the grid to allow display in the grids display as well as for use in the spatial interpolation routine.

When available on the file system, the name of the XML file is for example:

Grids 1.00 default.xml

Grids                                          Fixed file name for the Grids configuration

1.00                                            Version number

default                                       Flag to indicate the version is the default configuration (otherwise omitted).

Image Removed
Figure 28 Elements of the grids configuration

regular

For regular grids it is sometimes not required to add the location to the grids.xml when you only want to import/export the grid. Most grid transformations will not work when the output location is missing in the grids.xml. Regular grids that need a custom projection (projectionFile, polarStereoGraphic, geostationarySatelliteView, transverseMercator, mercator, albersEqualArea, azimuthalEquidistant, lambertAzimuthalEqualArea, rotatedCartesian, lambertConformalConic, rotatedSouthPole, rotatedNorthPole, rotatedCartesian, azimuthalEquidistant) should ALWAYS be listed in the grids.xml. The grid geometry should be available in the imported file (netcdf/grib).

When available on the file system, the name of the XML file is for example:

Grids 1.00 default.xml

Grids                                          Fixed file name for the Grids configuration

1.00                                            Version number

default                                       Flag to indicate the version is the default configuration (otherwise omitted).

Image Added
Figure 28 Elements of the grids configuration

regular

Definition of a regular grid. Definition of a regular grid. One or more regular grids may be defined.

...

Optional, when specified the grid cell boundaries can be based on the neighbour neighbor cells. Number of rows and columns in grid, at least two rows and two columns. Don't configure this for scattered point grids.

...

Coordinate system the grid is defined in. This may be a different coordinate system to that used in the main map display. The coordinate system may also differ per grid. A grid may be regular in one coordinate system, but may be irregular in another. Defining the grid in the regular coordinate system is generally easier.

You can also use the EPGS codes

cellCentre

Definition of the cell centre points of all cells in the irregular grid. The number of cellCentre points defined must be the same as the number of cells in the grid (rows x columns).

...

Shape file with cell polygons, lines and/or cell centers.

csvFile

Since 2013.01. Csv file with cell centers.Since 2013.01. Csv file with cell centers. Csv file should contain an "x" and "y" column. The cell centers should be listed from the upper left to the lower right, row by row. For regular grids always try to use a regular grid with a (custom) geodatum. For config example see: 06Grids-ConfigExamples

netcdfFile

Since 2015.02. Reference to a UGRID NetCDF file that contains only grid geometry meta data. This only supports mesh topologies (unstructured grids) with 2D coordinates. This can be 1D network, 2D triangular, 2D flexible or 3D layered mesh topologies. This currently only works for files that are compliant to the UGRID 1.0 conventions. For more information see http://ugrid-conventions.github.io/ugrid-conventions/

...

nccopy -V mesh2d,wgs84,mesh2d_node_x,mesh2d_node_y,mesh2d_node_z,mesh2d_edge_nodes,mesh2d_edge_x,mesh2d_edge_y,mesh2d_edge_x_bnd,mesh2d_edge_y_y_bnd,mesh2d_face_nodes,mesh2d_face_x,mesh2d_face_y,mesh2d_face_x_bnd,mesh2d_face_y_nodesbnd,mesh2d_faceFlowElem_xba,mesh2d_faceFlowElem_ybl,mesh2d_face_x_bnd,mesh2d_face_y_bnd,mesh2d_FlowElem_ba,mesh2d_FlowElem_bl,mesh2d_edge_type map.nc flowgeom.nc

The tool nccopy is part of the NetCDF library binary distribution.

Config Examples

edge_type map.nc flowgeom.nc

The tool nccopy is part of the NetCDF library binary distribution.

Config Examples

<irregular locationId="meshLocation">
	<netcdfFile>
		<file>simplebox_hex7_map.nc</file>
		<meshTopologyVariableName>insert_mesh_variable_name_here</meshTopologyVariableName>
		<staggerLocation>face</staggerLocation>
	</netcdfFile>
</irregular>

<irregular locationId="meshLocationSwan2D_G2_cellcenters">
	<netcdfFile><rows>1318</rows>
	<columns>317</columns>
	<esriShapeFile>
		<file>simplebox<file>swan2D_hex7G2_mapcellcenters.nc<shp</file>
		<meshTopologyVariableName>insert_mesh_variable_name_here</meshTopologyVariableName><geoDatum>WGS 1984</geoDatum>
		<x>%X%</x>
		<staggerLocation>face<<y>%Y%</staggerLocation>y>
	</netcdfFile>esriShapeFile>
</irregular>

<irregular locationId="Swan2D_G2_cellcenters">
	<rows>1318</rows>
	<columns>317</columns>
	<esriShapeFile>
		<file>swan2D_G2_cellcenters.shp</file>
		<geoDatum>WGS 1984<<projectionFileAvailable>true</geoDatum>projectionFileAvailable>
		<x>%X%</x>
		<y>%Y%</y>
	</esriShapeFile>
</irregular>

<irregular locationId="Swan2DGrid_G2Waqua_cellcentersZeedelta">
	<rows>1318<    <rows>1539</rows>
	<columns>317<    <columns>501</columns>
	<esriShapeFile>
		<file>swan2D_G2_cellcenters.shp</file>
		<projectionFileAvailable>true</projectionFileAvailable>
		<x>%X%</x>
		<y>%Y%</y>
	</esriShapeFile>
</irregular>
    <csvFile>
        <file>Grid_Waqua_Zeedelta.csv</file>
        <geoDatum>Rijks Driehoekstelsel</geoDatum>
        <x>%X%</x>
        <y>%Y%</y>
    </csvFile>
</irregular> 

<regular locationId="KNMI-HIRLAM-V70">
	<description>grid def. for KNMI-HIRLAM v7.0 with rotated pole</description>
	<rows>226</rows>
	<columns>136</columns>
	<rotatedSouthPole>
		<latitude>-30</latitude>
		<longitude>-15</longitude>
	</rotatedSouthPole>
	<gridCorners>
		<geoDatum>WGS 1984</geoDatum>
		<upperLeft>
			<x>-30.8688</x>
			<y>79.63847</y>
		</upperLeft>
		<lowerRight>
			<x>10.29617</x>
			<y>26.065</y>
		</lowerRight>
	</gridCorners>
</regular>

...